Request Information Download PDF
GTM41076-06VV-Q GTM41076-06VV-Q
Information
Model NumberGTM41076-06VV-Q
DescriptionGTM41076-06VV-Q, Medical Power Supply/Class 2 Power Supply, 60601-1-4th Ed. , Wall Plug-in, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, Blade Options for Q Series Wall Plug-in Power Supplies, Output Rating: 6 Watts, 5-30V in 0.1V increments, Approvals: cUR SIQ GOST-R Ukraine VCCI RoHS 2 China RoHS CB NrCAN IP40 Level V India PSE CCC Taiwan BSMI WEEE Double Insulation CE CE
Agency Documentshttp://www.globtek.info/certs/GTM41076/
CE EC-Declaration for Medicalhttp://globtek.force.com/models/ec_declaration?id=a0O30000007P7ZrEAK
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0O30000007P7ZrEAK
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0O30000007P7ZrEAK
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC
CategoryMedical Power Supply/Class 2 Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.16-0.1A
Wattage (W)6
Vout Range (V)5-30
EfficiencyMeets/Exceeds for Medical
Ingress ProtectionIP52
Size (mm)74*44*34
EnclosureUser-added image
LED INDICATOR: LED INDICATOR AVAILABLE UPON REQUEST. GREEN INDICATES POWER PRESENT.

 
Rating Table
Model NumberVoltageAmps (A)Watts (W)RFQ
GTM41076-060551.26RFQ
GTM41076-0606-0.95.11.1766RFQ
GTM41076-0606616RFQ
GTM41076-060770.855.95RFQ
GTM41076-0612120.56RFQ
GTM41076-0615150.46RFQ
GTM41076-0618180.335.94RFQ
GTM41076-0620200.36RFQ
GTM41076-0624240.256RFQ
GTM41076-0630300.164.8RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
1. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
2. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
3. Output Regulation: +/- 5% measured at the output connector
4. Line Voltage Regulation: +/- 1% typical measures at full load
5. Output Ripple (Vp-p): 1% or 150 mV whichever is greater measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of output connector at nominal line
6. Turn-On/Turn-Off Overshoot: 5% maximum, 500 uS typical recovery time for 25% step load
7. Turn-On Delay: 3000 mS second typical
8. Hold-Up Time: 8mS typical @ nominal input voltage & full load
9. Inrush Current: 30A typical @ 115Vac input ; 60A typical @ 230Vac input
10. Switching Frequency: 66.5 KHz typical

B) PROTECTION
1. Over-Voltage: Electronically Protected, unit will recover upon removal of fault
2. Short Circuit: Electronically Protected, unit will recover upon removal of fault
3. Input Protection: Input line fusing

C) SAFETY
1. Dielectric Withstand Voltage: 4242Vdc from primary to secondary
2. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition)

D) OTHER:
1. MTBF: 200,000 hours @ 25°C ambient temperature
2. Operating Temperature: 0°C to 40°C ambient temperature
3. Humidity: 0% to 95% relative humidity
4. Storage Temperature: -40°C to 80°C
Normal performance after 2h recovery time at the room temperature without connection to mains
5. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006

E) ENCLOSURE
1. Upper Housing: High impact plastic, 94V0 polycarbonate, non-vented
2. Lower Housing: High impact plastic, 94V0 polycarbonate, non-vented
3. Size: 43.5*74.0*35.3 mm +/-1.0
Derating Curve
Qty (ea.)/Carton80
Individual Box/Gift Box Size (mm)90.5*73*53
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)388*380*245
Gross Weight (kg)15.2
Label Width (mm)29.8
Label Height (mm)20.8
Input Configuration
DescriptionBlade Options for Q Series Wall Plug-in Power SuppliesData Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: Q-Blade Style Instruction Video




blades
User-added imageUser-added image
11                           12

INPUT CONNECTOR: Q-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "Q-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: Q-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: Q-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: Q-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: Q-EU(R)
05. Korean KS C8305 configuration: 2 pins, Class II; KR P/N: Q-KR(R)
06. Argentina IRAM 2073 configuration: 2 blades; AR P/N: Class II Q-AR(R)
07. China GB 2099 configuration: 2 blades, Class II; CN P/N:Q-CN(R)
08. India IS 1293 6A/SANS 164-3/BS546 configuration: 5A, 3 pins with Dummy Ground, Class II; IN P/N: Q-IN(R)
09. IEC320/C18 Inlet, Class II; P/N: Q-C18(R)
10. Brazilian NBR6147 configuration: 2 pins, Class II; BR P/N: Q-BR(R)
11. S. African SANS 164-1 configuration: 2 pins with Dummy Ground, Class II; SA P/N: Q-SANS164-1-16A(R)
12.  Israel / Malaysia / Singapore British Standard BS 546-15A configuration: 2 pins with Dummy Ground, Class II; P/N: Q-BS546-15A(R)

Kits

01. Q-KIT: 1,2,3,4 above
02. Q-KIT-INTL: 2,3,4 above
03. Q-KIT-6: 1,2,3,4,5,6 above
04. Q-KIT-7: 1,2,3,4,5,6,7 above
05. Q-KIT-8: 1,2,3,4,5,6,7,8 above

Output Configuration
Common output connector options:

L Type (Coaxial 5.5x2.5mm plug)

C Type (Coaxial 5.5x2.1mm plug)

K Type (Coaxial 3.5x1.3mm plug)

LL Type (5.5x2.5mm Locking 760k type)

CL Type (5.5x2.1mm Locking S761k type)

ML2 Type (Molex housing 43025-0200)

YL3 Type (KPPX-3P)

YL4 Type (KPPX-4P)

EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)

MSB Type (Micro USB)

USBC Type (USB Type C)

Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added image
 
Bureau Of Indian Standards for GTM41076-0605(5V only)
User-added image
R32282
 
Taiwan BSMI GTM41076 R32282 5V, 6V,7V,9V, 12V,15V,18V, 20V,24V,30Vhttp://www.bsmi.gov.tw/wSite/ct?xItem=4072&ctNode=816&mp=2
User-added imageCaution/Attention
No Logo ApplicableCB report IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007) and or EN 60601-1:2006 3rd Edition including 2MOOP requirements
User-added image
CCC to GB4943.1-2011, Tropical <2000
User-added image  CE Certification Class II CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15 B
User-added image  Test standard: EN 60601-1-2: 2015
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
 
UR 60601-1,File #E172861 or Optional E341350, 1st Edition, 2006-04-26 CAN/CSA-C22.2 No. 601.1-M90, 2005
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP40Ingress Protection: IP40 to IEC60529:2001 Protection against granular foreign bodies
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50315169, to J60950-1(H26) , J55022(H22),[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
 User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
User-added imageEEV1191Natural Resources Canada (NRCan): CSA Standard C381.1-08, QSP NRCAN EEV1191; http://shop.csa.ca/en/canada/energy-efficiency/cancsa-c3811-08/invt/27024802008
User-added image
 
Australia and New Zealand Regulatory Compliance, Mark (http://rcm.standards.org.au/rcmfaq/rcmfaq.htm
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added image
 
IEC 60601-1:2005 (Third Edition) + CORR. 1:2006 + CORR. 2:2007 + A1:2012 (or IEC 60601-1: 2012 reprint)
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
149112150.4Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
137718240.25Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
18171951.2Female Barrel, Locking, 5.5 * 2.5 * 12mm w/ 4.0mm Thumb Screw or Equal
16851651.2Mini-B USB 5 Pin Type "B" or Equal with 200 Ohm resistor between Pin 2 & 3
16835451.2Female Barrel, Right Angle 3.5 +0/-0.1 * 1.35 +0.1/-0 * 9.5 +/-0.5 mm with internal Spring Clip and Locking Notch
12766451.2Stripped 25 +/- 2mm; Tinned 6 +/- 2mm or Equal
12766751.2Female Barrel 4.0*1.7*12mm with internal Spring Clip and Locking Notch or Equal
12767051.2Female Barrel 3.5*1.35*9.5mm, with Locking Notch and Spring Clip or Equal
13753751.2Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
13753951.2Micro USB type B without resistor
13754351.2Mini-B USB 5 Pin Type "B" or Equal
13754751.2Type "A" USB 4 Pin Jack or Equal
13754951.2Micro-B USB 5 Pin Type "B" or Equal
19773951.2Stripped 25+/-5mm, Tinned 8+/-2mm with Black Thermal Contracting Sleeve length 10 +3/-1mm or Equal
17283851.2Female Barrel, Locking, 5.5 * 2.5 * 12mm w/ 4.0mm Thumb Screw or Equal
17093451.2Mini-B USB 5 Pin, Right Angle, Type "B" or Equal
14873751Mini-B USB 5 Pin Type "B" or Equal
16832451.2Female Barrel 5.5*2.5*9.5mm No internal Spring Clip nor Locking Notch or Equal
16863651.2Micro-B USB 5 Pin Type "B" or Equal
16862651.2Micro USB type B or Equal with 200 Ohm resistor between Pin 2 & 3
17064251.2Female Barrel 5.5 * 2.5 * 10mm No internal Spring Clip nor Locking Notch or Equal
16190751.2Female Barrel, Right Angle 3.5 +0/-0.1 * 1.35 +0.1/-0 * 9.5 +/-0.5 mm with internal Spring Clip and Locking Notch
14975451.2Female Barrel Straight EIAJ1 2.35 * 0.7 * 11mm with internal Spring Clip and Locking Notch or Equal
16407451.2Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
16689851.2Type "A" USB B Jack or Equal
39746451.2Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
11748351.2Female Barrel Right Angle, 5.5*2.1*11mm with NO internal Spring Clip NOR Locking Notch or Equal
16724151.2Female Barrel 3.5*1.3*9.5 mm, with Locking Notch and Spring Clip or Equal
10121151.2Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
16815351.2Mini-B USB 5 Pin, Right Angle, Type "B" or Equal
1015785.11.176EIAJ-5 Plug, Female Barrel 6.5 x 4.3 x 10.3mm ( OD x ID x L) with 1.40mm center pin
16860961Female Barrel, Right Angle 3.5*1.1*9.5 mm No internal Spring Clip nor Locking Notch or Equal
16773660.83.5*14mm male plug
16716461PCB Pins 4.5mm L x 1.5mm Dia
12770061Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
11757661Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
16707361RJ10 Plug, 4 Pin or Equal
25220261Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
17860061Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or Equal
19825861Female Barrel 5.5 * 2.1 * 13.8 mm w/ 4 mm Thumb Screw or Equal
19619361Female Barrel 5.5 * 2.1 * 13.8 mm w/ 4 mm Thumb Screw or Equal
19603361Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
17325460.8Female Barrel 4.0*1.7*7.0mm with internal Spring Clip and Locking Notch or Equal
14398070.8Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
1439777800Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
1376087.00.85Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
1819087.50.8Modular Telephone Plug 4P4C, AMP P/N 5-0641334-5 OR Equivalent
17939190.5Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
14971690.66Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or Equal
27145990.66Female Barrel 5.5*2.5*12mm, Right Angle with internal Spring Clip nor Locking Notch or Equal
27415390.66Female Barrel Right Angle, 5.5*2.1*11mm with internal Spring Clip and Locking Notch or Equal
11773390.66Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
14971690.66Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or Equal
14971690.66Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or Equal
14971690.66Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or Equal
14971690.66Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or Equal
News Releases
TitleWeb Link
Medical (60601-1) Power Supply AC Adapter certified by Singapore Spring to mark the SAFETY MARK per Singapore national Consumer Protection (Safety Requirements) Registration Scheme (CPS Scheme), GTM41076 Serieshttp://en.globtek.com/news.php/medical-60601-1-power-supply-ac-adapter-certified-by-singapore-spring-to-mark-the-safety-mark-per-singapore-national-consumer-protection-safety-requirements-registration-scheme-cps-scheme-gtm41076-series
Medical (60601-1) Power Supply AC Adapter European National and CB certifications upgraded to include 2KV IEC61000-4-5 Surge requirement for European Union applications by SIQ per national standard IEC 60601-1:(title too long, pls translate in body)http://en.globtek.com/news.php/medical-60601-1-power-supply-ac-adapter-european-national-and-cb-certifications-upgraded-to-include-2kv-iec61000-4-5-surge-requirement-for-european-union-applications

Request Info