Request Information Download PDF Configure Output Connector
GTD93035L6013.2-F GTD93035L6013.2-F
Ruggedized DC/DC converter, 9-60VDC Input and 60W/13.2VDC output. Alternate output voltages available. IEC 60068 Vibration, Shock, Bump, and Salt Mist tested
Information
Model NumberGTD93035L6013.2-F
DescriptionGTD93035L6013.2-F, ITE Power Supply, Desktop/External, DC-DC, , Input Rating: 9-60 VDC, 3 Positon Terminal Block, Output Rating: 60 Watts, 13.2V in 0.1V increments, Approvals: S-Mark CE FCC IP54 Salt Mist Vibration Shock Bump Saudi South African cETLus AS/NZS RCM SGS (Brazil) CU Kazakhstan NOM CCC South African Malaysia CB
Agency Documentshttp://www.globtek.info/certs/GTD93035/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000C2WkZEAV
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000C2WkZEAV
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeDesktop/External
TechnologyDC-DC
CategoryITE Power Supply
Input Voltage9-60 VDC
I/P Amps (A)9.0 A
Wattage (W)60
Vout Range (V)13.2
EfficiencyN/A
Ingress Protection
Size (mm)142*62*36
EnclosureUser-added image





 
Rating Table
Model NumberVoltageAmps (A)Watts (W)RFQ
GTD93035L6013.2-F13.24.559.4RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
1. Input Voltage: 9-60 Vdc
2. Output Regulation: +/- 1% measured at the output connector
3. Line Voltage Regulation: +/- 1% typical measured at full load
4. Output Ripple (Vp-p): 132mV maximum, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
5. Turn-ON/OFF Overshoot: 5% maximum, 500uS typical recovery time for 25% to 50% step load
6. Turn-ON Delay: 3 Seconds, maximum @ full load, nominal line
7. Hold-Up Time: 5mS typical @ nominal input voltage and full load
8. Inrush Current: 60A maximum cold start @ 9Vdc input
9. Switching Frequency: 150 KHz typical
10. Efficiency: >75% at 9Vdc full load
>78% at 12Vdc full load
>80% at 12Vdc-60Vdc full load

11. Transient Response: 200uS to +/-1.5% max value @ 25% load step

B) PROTECTION
1. Over-Voltage: Protected latch type, input recycling required to recover
2. Short Circuit: Hiccup with auto recovery
3. Over-load: Hiccup with auto recovery
4. Input Protection: Input line and neutral fusing
5. Reverse Polarity Protection: Yes

C) SAFETY
1. Dielectric Withstand Voltage: 1600 Vdc from primary to secondary, primary to chassis, secondary to chassis


D) OTHER:
1. MTBF: 200,000 Hours @ 25°C ambient temperature
2. Operating Temperature: -30°C to 50°C ambient temperature
3. Humidity: 5% to 85% relative humidity
4. Storage Temperature: -40°C to 85°C
5. Cooling: Convection

E) ENCLOSURE
1. Housing: Rugged, vehicle mounted. Vibration, shock, contamination, water resistant. Aluminum
2. Size: 189*95*53mm
3. Markings: Label
4. Vibration: IEC 60068-2-64 Fh (Random)
5. Bump: IEC 60068-2-29 Eb
6. Waterproof: Not required. However, it should be water-resistant. Recommended IEC 60068-2-52
7. Contamination: Resistant to chemicals, rust, etc.
Derating Curve
Qty (ea.)/Carton12
Individual Box/Gift Box Size (mm)117*74*204
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)430 x 370 x 190
Gross Weight (kg)15.2
Label Width (mm)49.0
Label Height (mm)28.0
Input Configuration
Description3 Positon Terminal BlockShanghai Elinker P/N: LG103-5.0
Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector






YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) USBC Type (USB Type C) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
No Logo ApplicableAS/NZS 60950.1:2011
No Logo CB Certificate IEC 60950-1:2005 2nd Edition + A1:2009 +A2:2013 Report to EN 60950-1:2006 +A11:2009 +A1:2010 + A12:2011 +A2:2013 For 5V-24V only
User-added image CCC to GB4943.1-2011 GB9254-2008 GB17625.1-2012 with Tropical and Altitude above 2000m approval
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added image

cETLus-Cert-60950-1 4007497 Listed
User-added image  
адаптер питания
CU Kazakhstan Certificate
User-added image
FCC PART 15 CLASS B
IP54Ingress Protection: IP54 to IEC60529:2001 Protected against dust - limited ingress (no harmful deposit) and Protected against sprays from all directions - limited ingress permitted
No Logo Malaysia ST Release Letter GTD93035L6013.2-F GTD93035H6013.2-F IEC60950-1:2005 (ED.2) + A1:2009 No logo
User-added image
Fuente de alimentación de ITE
NOM (Mexico) to NOM-001-SCFI-1993
User-added image
RCM N136; Australia and New Zealand Regulatory Compliance, Mark (http://rcm.standards.org.au/rcmfaq/rcmfaq.htm
User-added imageS-Mark Certificate EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 +A2:2013 (http://www.intertek.com/marks/s/)
No LOGOSalt Mist to IEC 60068-2-52 Environmental testing Part 2: Tests- Test Kb: Salt mist, cyclic (sodium chloride solution)

User-added image
Saudi Arabia approval to IEC 60950
User-added image
FONTE DE ALIMENTAÇÃO DE ITE
SGS (Brazil) to IEC 60950-1_2005 + A1_2009 (13.2 Volts)
 No LogoSouth Africa EMI and EMC approval to CISPR 22 Class B CISPR 24
 No LogoSouth Africa approval to SANS IEC 60950
No LOGOViration, Shock, Bump to IEC 60068-2-6:2007 -2-64:2008 -2-27:2008 -2-29 ed 2.0 Environmental testing Part 2 Tests
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
16698813.24.545.08mm pitch 3 position
16698813.24.545.08mm pitch 3 position
News Releases
TitleWeb Link
Very Wide Input Range 1:6 DC/DC Converter provides 60W (Watts) of DC output from an input voltage of 9-60VDC, an ideal solution for automotive and train/railway applications, Model GTD93035L6013.2-F(R)http://en.globtek.com/news.php/very-wide-input-range-16-dcdc-converter-provides-60w-watts-of-dc-output-from-an-input-voltage-of-9-60vdc-an-ideal-solution-for-automotive-and-trainrailway-applications-model-gtd93035l60132-fr#.Uq8pn_RDv74
AS/NZS Certificate GTD93035L6013.2-F GTD93065H6013.2-F AS/NZS 60950.1:2011 RCM Certificate GTD93035L6013.2-F GTD93065H6013.2-F AS/NZS CISPR 22:2009 + A1
Brazil Certificate GTD93035L6013.2-F GTD93065H6013.2-F GTD93035H6013.2-F IEC 60950-1_2005 + A1_2009 EN 60950-1_2006 +A11 + A1 + A12
CU KAZAKHSTAN Certificate GTD93035L6013.2-F GTD93065H6013.2-F GTD93035H6013.2-F
NOM Certificate GTD93035L6013.2-F NOM-001-SCFI-1993
CB Certificate GTD93035L6013.2-F IEC 60950-1:2005 2nd Edition + A1:2009 +A2:2013 CB Report to EN 60950-1:2006 +A11:2009 +A1:2010 + A12:2011 +A2:2013
IRAM Certificate GTD93035L6013.2-F GTD93065H6013.2-F GTD93035H6013.2-F IEC 60950-1_2005 + A1_2009
CCC Certificate GTD93035L6013.2-F GB4943.1-2011 GB9254-2008 GB17625.1-2012 TROPICAL ALTITUDE
South African Certificate GTD93035L6013.2-F GTD93035H6013.2-F SANS IEC 60950
ST-MALAYSIA Certificate GTD93035L6013.2-F GTD93035H6013.2-F IEC60950-1:2005 (ED.2) + A1:2009

Request Info