Request Information Download PDF Configure Output Connector
GTM93021-20VV-FWD2 (PCB Mount/Pins no housing) GTM93021-20VV-FWD2 (PCB Mount/Pins no housing)
Information
Model NumberGTM93021-20VV-FWD2 (PCB Mount/Pins no housing)
DescriptionGTM93021-20VV-FWD2 (PCB Mount/Pins no housing), Medical Power Supply/Class 2 Power Supply, Potted/Encapsulated in plastic housing, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, Solder Pins for Line & Neutral, 1.4 mm square pins, 4.5 mm long, Output Rating: 20 Watts, 5-48V in 0.1V increments, Approvals: CE WEEE Double Insulation RoHS 2
Agency Documents
CE EC-Declaration for Medicalhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000JCuUgEAL
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000JCuUgEAL
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000JCuUgEAL
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypePotted/Encapsulated in plastic housing
TechnologyRegulated Switchmode AC-DC
CategoryMedical Power Supply/Class 2 Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.6
Wattage (W)20
Vout Range (V)5-48
EfficiencyV
Ingress ProtectionIP68
Size (mm)42.26*45.26*25
EnclosureUser-added image


Nylon Stability Pin Detail:
 
MATERIAL:NYLON 66 (UL)
FLAME CLASS:94V-2
User-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GTM93021-1507-2.0-D2 5315 RFQ
GTM93021-1809-D2 9218 RFQ
GTM93021-2009-D2 92.2219.98 RFQ
GTM93021-2015-3.0-D2 121.6720.04 RFQ
GTM93021-2024-D2 240.8319.92 RFQ
GTM93021-2036-D2 360.5620.16 RFQ
GTM93021-2048-D2 480.4220.16 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector
04. Line Voltage Regulation: +/- 1% typical measured at full load
05. Output Ripple (Vp-p): +/-1% or 150 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
06. Turn-ON/OFF Overshoot: 5% maximum, 1 mS typical recovery time for 25% to 50% step load
07. Turn-ON Delay: 3000 mS, maximum @ full load, nominal line
08. Hold-Up Time: 8 mS typical @ nominal input voltage and full load
09. Inrush Current: 30A maximum cold start @ 240Vac input
10. Switching Frequency: 65 KHz typical

B) PROTECTION
01. Over-Voltage: Electronically Protected Zener clamp across the output
02. Short Circuit: Electronically Protected unit will auto recover upon removal of fault
04. Input Protection: Input line and neutral fusing

C) SAFETY
01. Dielectric Withstand Voltage: 4242Vdc from primary to secondary
02. Earth Leakage Current: <0.25 mA at 240Vac input voltage
03. Earth continuity test:<0.1 Ohm or < 0.2 Ohm when with a non-detachable Power Supply cord, Class I Only
04. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 48.0 Length x 51.0 Width x 35.0 High mm +/-1.0 mm typical Unterputz Power Supply (netzteil) for “Hohlwanddose” per VDE0606 (Einbau-Netzteil Stromversorgung für Unterputz-Installation)
03. Markings: Label and/or Pad Printed and/or Molded in the case
Derating Curvestandard derating
Qty (ea.)/Carton147
Individual Box/Gift Box Size (mm)55*51*52
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)410 x 380 x 195
Gross Weight (kg)15.2
Label Width (mm)39.5
Label Height (mm)36.5
Input Configuration
DescriptionSolder Pins for Line & Neutral, 1.4 mm square pins, 4.5 mm long
Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector






YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) USBC Type (USB Type C) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added image  CE Certification
User-added image

Double Insulation - Mark is on the label or Molded in the case
Ta:50°CIEC 61558-1 GTM93021 Maximum Ambient Temperature, Max 50°C
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added imageTransformer Symbol IEC 61558-1 SMPS Short-Circuit –Proof Safety Isolating Transformer
User-added imageTransformer Symbol IEC 61558-1 SMPS Switch Mode Power supply
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
News Releases
TitleWeb Link
Ingress Protection: IP68 to IEC60529:2001 Totally dust tight and Protected against long periods of immersion under pressure
CE Certificate and EMC Report EN 55022:2010 EN 55014-1:2006+A1:2009+A2:2009 EN 61000-3-2:2006+A1:2009+A2:2009 EN 61000-3-3:2008 EN 55024:2012 EN 61000-6-2:2005

Request Info