Request Information Download PDF
GT-41060-WWVV-Q GT-41060-WWVV-Q
Information
Model NumberGT-41060-WWVV-Q
DescriptionGT-41060-WWVV-Q, ITE Power Supply, 60601-1-4th Ed. , Wall Plug-in, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, Blade Options for Q Series Wall Plug-in Power Supplies, Output Rating: 15 Watts, 3.0-30V in 0.1V increments, Approvals: CE WEEE Double Insulation VCCI RoHS 2 FCC NrCAN NEMKO CCC China RoHS GOST-R IRAM PSE UL/cUL LPS Level IV 115V Ukraine C-Tick Korea (12V Only) Singapore (12V only) Taiwan BSMI CB IP52 Option IP40 PSE India
Agency Documentshttp://www.globtek.info/certs/GT-41060/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0O30000007P7YVEA0
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0O30000007P7YVEA0
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC
CategoryITE Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.6 A
Wattage (W)15
Vout Range (V)3.0-30
EfficiencyIV
Ingress ProtectionIP40
Size (mm)84.0* 56.0*37.9
EnclosureUser-added image
Rating Table
Model NumberVoltageAmps (A)Watts (W)RFQ
GT-41060-100332.67.8RFQ
GT-41060-1505-1.043.7515RFQ
GT-41060-15055315RFQ
GT-91125-15005530150RFQ
DSA-15015315RFQ
DSA-15055315RFQ
HES61-305315RFQ
GT-41060-170662.816.8RFQ
GT-348-6-1000D616RFQ
GT-41060-1809-1.57.52.418RFQ
GT-41060-18099218RFQ
GT-51084-12N12-JP12336RFQ
GT-41060-2512122.0824.96RFQ
GT-41060-2515151.6624.9RFQ
GT-41060-2518181.3824.84RFQ
GT-41060-2520201.2525RFQ
GT-41060-2524241.0424.96RFQ
DA-60-24242.560RFQ
GTMDT66A-25.2-2500-325.22.563RFQ
GT-41060-2530300.8324.9RFQ
GT-41060-2548480.5224.96RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
1. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
2. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
3. Output Regulation: +/- 5% measured at the output connector
4. Line Voltage Regulation: +/- 1% maximum at full load
5. Output Ripple (Vp-p): 1% or 150 mV whichever is greater measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of output connector at nominal line
6. Turn-On/Turn-Off Overshoot: 5% maximum, 500uS maximun recovery time for 25% to 50% step load
7. Turn-On Delay: 3000 mSEC maximum at full load, 115VAC
8. Hold-Up Time: 10mS minimum at nominal input and full load
9. Inrush Current: 30A typical at 115VAC input and 60A typical at 230 VAC input
10. Switching Frequency: 65 KHz typical

B) PROTECTION
1. Over-Voltage: Protected, unit will recover upon removal of fault
2. Over-Load: Protected, unit will recover upon removal of fault
2. Short Circuit: Protected, unit will recover upon removal of fault
3. Input Protection: Input line fusing

C) SAFETY
1. Dielectric Withstand Voltage: 4242Vdc from primary to secondary
2. Touch Current: <0.25mA @ 240Vac input voltage

D) OTHER:
1. MTBF: 200,000 hours @ 25°C ambient temperature
2. Operating Temperature: 0°C to 40°C ambient temperature
3. Humidity: 0% to 90% relative humidity
4. Storage Temperature: -40°C to 80°C
5. ROHS 2: Complies with EU 2011/65/EU & CHINA SJ/T 11363-2006

E) ENCLOSURE
1. Upper Housing: High impact plastic, 94V0 polycarbonate, non-vented
2. Lower Housing: High impact plastic, 94V0 polycarbonate, non-vented
3. Size: 84.0* 56.0*37.9 mm +/-1.0
4. Green LED indicator for power "Power On"
Derating CurveUser-added image
Qty (ea.)/Carton40
Individual Box/Gift Box Size (mm)114*69.5*58.4
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)463*355*122
Gross Weight (kg)10.8
Label Width (mm)48.5
Label Height (mm)40.8
Input Configuration
DescriptionBlade Options for Q Series Wall Plug-in Power SuppliesData Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: Q-Blade Style Instruction Video




blades
User-added imageUser-added image
11                           12

INPUT CONNECTOR: Q-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "Q-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: Q-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: Q-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: Q-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: Q-EU(R)
05. Korean KS C8305 configuration: 2 pins, Class II; KR P/N: Q-KR(R)
06. Argentina IRAM 2073 configuration: 2 blades; AR P/N: Class II Q-AR(R)
07. China GB 2099 configuration: 2 blades, Class II; CN P/N:Q-CN(R)
08. India IS 1293 6A/SANS 164-3/BS546 configuration: 5A, 3 pins with Dummy Ground, Class II; IN P/N: Q-IN(R)
09. IEC320/C18 Inlet, Class II; P/N: Q-C18(R)
10. Brazilian NBR6147 configuration: 2 pins, Class II; BR P/N: Q-BR(R)
11. S. African SANS 164-1 configuration: 2 pins with Dummy Ground, Class II; SA P/N: Q-SANS164-1-16A(R)
12.  Israel / Malaysia / Singapore British Standard BS 546-15A configuration: 2 pins with Dummy Ground, Class II; P/N: Q-BS546-15A(R)

Kits

01. Q-KIT: 1,2,3,4 above
02. Q-KIT-INTL: 2,3,4 above
03. Q-KIT-6: 1,2,3,4,5,6 above
04. Q-KIT-7: 1,2,3,4,5,6,7 above
05. Q-KIT-8: 1,2,3,4,5,6,7,8 above

Output Configuration
Common output connector options:

L Type (Coaxial 5.5x2.5mm plug)

C Type (Coaxial 5.5x2.1mm plug)

K Type (Coaxial 3.5x1.3mm plug)

LL Type (5.5x2.5mm Locking 760k type)

CL Type (5.5x2.1mm Locking S761k type)

ML2 Type (Molex housing 43025-0200)

YL3 Type (KPPX-3P)

YL4 Type (KPPX-4P)

EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)

MSB Type (Micro USB)

USBC Type (USB Type C)

Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription

User-added image
 
Bureau Of Indian Standards for GT-41060-2512
User-added image
R32282

Taiwan BSMI (12V designs only); http://www.bsmi.gov.tw/wSite/ct?xItem=4072&ctNode=816&mp=2
User-added image
C-Tick GT-41060 N4292 SAA090632EA
No Logo CB Certificate IEC 60950-1:2005 (2nd Edition), Am 1: 2009, CB report IEC 60950-1:2005 (2nd Edition), Am 1: 2009 and EN 60950-1:2006 + Am 1:2010 + Am 11:2009 + Am 12:2011
User-added imageCCC to GB4943.1-2011 GB9254-2008 GB17625.1-2012, Tropical <2000
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added imageUL60950-1, cULus to UL 60950-1, 2nd Edition, 2007-03-27 and CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
FCC PART 15 CLASS B
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP40Ingress Protection: IP40 to IEC60529:2001 Protection against granular foreign bodies
IP52 OPTIONALIngress Protection: IP52 to IEC60529:2001 Protected against dust - limited ingress (no harmful deposit) and Protected against direct sprays up to 15 degrees from the vertical
User-added image
PRECAUCION: PARA USO EN EQUIPOS ELECTRONICOS SOLAMENTE
 
IRAM certificate DC-E-G71-002.1 to IEC 60950 + A1:2009
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50314327, to J60950-1(H26) , J55022(H22),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added image
Korea KET KC Mark GT-41060-2512 HU10173-10024A (12V Only)
User-added imageEfficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
LPSLimited Power Source GT-41060 9 - 30 volts only
User-added imageNEMKO EN60950-1:2006, A11, A1, A12,A2
User-added imageEEV1191Natural Resources Canada (NRCan): CSA Standard C381.1-08, QSP NRCAN EEV1191; http://shop.csa.ca/en/canada/energy-efficiency/cancsa-c3811-08/invt/27024802008
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added image
Singapore GT-41060-2512 ICE 60950-1:2001 + 2009 100599-12 (12 v only)
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)ConnectorAvailability
100634122.08Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or EqualContact for Status
107448122.008Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or EqualContact for Status
200033122.08Female Barrel 5.5*2.5*9.5mm, Right Angle with internal Spring Clip & Locking Notch or EqualContact for Status
200032122.08Female Barrel 5.5*2.5*9.5mm, Right Angle with internal Spring Clip & Locking Notch or EqualContact for Status
190289120.16Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or EqualContact for Status
198618122.08Female Barrel 5.5*2.5*9.5mm, Right Angle No internal Spring Clip nor Locking Notch or EqualContact for Status
198490122.08Female Barrel 3.5*1.35*7.5mm, without Locking Notch nor Spring Clip or EqualContact for Status
197671122.08Female Barrel 3.5*1.35*7.5mm, without Locking Notch nor Spring Clip or EqualContact for Status
165716122.08MOLEX P/N:43025-1000 Micro-fit 10 pin circuit connector housing with TERMINAL P/N: 0430300001 or EqualContact for Status
163256121.25Female Barrel 5.5*2.1*9.5mm No internal Spring Clip nor Locking Notch or EqualContact for Status
161166122.08Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or EqualStock Available
149514122.08Female Barrel 5.5*2.1*9.5mm No internal Spring Clip nor Locking Notch or EqualStock Available
137667122.08Female Barrel 5.5*2.5*11mm, Right Angle without internal Spring Clip & Locking Notch or EqualContact for Status
137665122.08Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or EqualStock Available
128509122.08Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or EqualContact for Status
117855122.08MOLEX MICROFIT FEMALE 10 PIN 43025-1000Contact for Status
137691151.67Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or EqualContact for Status
137692151.678 Pin DIN Plug or EqualContact for Status
199771201.25Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or EqualContact for Status
127640201.25Stripped 25 +/- 5mm; Tinned 6 +/- 1mm or EqualContact for Status
165713241.04Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or EqualContact for Status
174419241.04Female Barrel 3.5*1.35*7mm, with Locking Notch and Spring Clip or EqualContact for Status
117948241.04Female Barrel 5.5*2.1*10mm w/ Spring Clip & Locking Notch or EqualContact for Status
117955241.04Female Barrel 3.8*1.35*11mm, no Locking Notch and Spring Clip or EqualContact for Status
127578241.04Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or EqualContact for Status
12765743.75Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or EqualContact for Status
13756753Female Barrel 5.5*2.1*9.5mm No internal Spring Clip nor Locking Notch or EqualStock Available
17512853Female Barrel 2.35 * 0.7 * 9.5mm Female Straight Plug or EqualContact for Status
16325752Female Barrel 5.5*2.1*9.5mm No internal Spring Clip nor Locking Notch or EqualContact for Status
1959087.52.4Female Barrel Right Angle 4.75*1.7*9.5mm with internal Spring Clip and Locking Notch or EqualContact for Status
23922892.7Female Barrel 5.5*2.1*9.5mm No internal Spring Clip nor Locking Notch or EqualContact for Status
News Releases
TitleWeb Link
LPS Power Supply in Class II double insulated 24W (Watt) Interchangeable blade wall plug in mechanical configuration updated to latest Taiwan standard CNS 14336-1 (2010) - Safety - Part 1: General requirements and the latest editio[[[[[full title below]]]en.globtek.com/news.php/lps-power-supply-in-class-ii-double-insulated-24w-watt-interchangeable-blade-wall-plug-in-mechanical-configuration-model-gt-41060-series

Request Info