Request Information Download PDF Configure Output Connector
GT-41062-xxxx-Q GT-41062-xxxx-Q
Information
Model NumberGT-41062-xxxx-Q
DescriptionGT-41062-xxxx-Q, ITE Power Supply, Wall Plug-in, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, Blade Options for Q Series Wall Plug-in Power Supplies, Output Rating: 18 Watts, 5-24V in 0.1V increments, Approvals: China RoHS WEEE Double Insulation CE VCCI GOST-R NrCAN CCC RoHS 2 LPS Ukraine Level IV 115V cUL Taiwan BSMI CB Korea (12V Only) Korea (24V Only) Korea (5V Only) Level V IP52 SIQ PSE
Agency Documentshttp://www.globtek.info/certs/GT-41062-CHANGEABLE/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0O30000007P7Z2EAK
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0O30000007P7Z2EAK
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC
CategoryITE Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.6 A
Wattage (W)18
Vout Range (V)5-24
EfficiencyV/IV see Approvals
Ingress ProtectionIP52
Size (mm)43.5* 74.0*35.3
EnclosureUser-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-41062-1805 53.216 RFQ
GT-41062-1806 6318 RFQ
GT-41062-1807 72.5717.99 RFQ
GT-41062-1809 9218 RFQ
GT-41062-1812 121.518 RFQ
GT-41062-1815 151.218 RFQ
GT-41062-1818 18118 RFQ
GT-41062-1820 200.918 RFQ
GT-41062-1824 240.7518 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
1. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
2. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
3. Output Power (Rated): 18 Watts max
4. Output Load Regulation: +/- 5% measured at the output connector
5. Line Voltage Regulation: +/- 1% typical measured at the output connector
6. Output Ripple (Vp-p): 1% or 150 mV whichever is greater at nominal output voltage. Measured at 20 MHz bandwidth with 0.1 µf ceramic
capacitor in parallel with 10 µf electrolytic capacitor connected at the end of output connector.
7. Turn-On/Turn-Off Overshoot: 5% maximum, 500mS typical recovery time for 25% step load
8. Turn-On Delay: 3000 mS typical
9. Hold-Up Time: 10mS typical at nominal input voltage & full load
10. Inrush Current: 30A typical at 115Vac input ; 60A typical at 230Vac input
11. Switching Frequency: 66.5 KHz typical

B) PROTECTION
1. Over-Voltage: Protected with zener clamp across the output
2. Short Circuit: Protected. Unit will recover upon removal of fault
3. Input Protection: Input line fusing

C) SAFETY
1. Dielectric Withstand Voltage: 4242Vdc from primary to secondary
2. Touch Current: <0.25mA @ 240Vac input voltage


D) OTHER:
1. MTBF: 200,000 hours at 25°C ambient temperature
2. Operating Temperature: 0°C to 40°C ambient temperature
3. Humidity: 0% to 90% relative humidity
4. Storage Temperature: -10°C to 80°C
5. ROHS 2: Complies with EU 2011/65/EU & CHINA SJ/T 11363-2006

E) ENCLOSURE
1. Upper Housing: High impact plastic, 94V0 polycarbonate, non-vented
2. Lower Housing: High impact plastic, 94V0 polycarbonate, non-vented
3. Size: 43.5* 74.0*35.3 mm +/-1.0
Derating Curve
Qty (ea.)/Carton80
Individual Box/Gift Box Size (mm)90.5*73*53
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)388 x 380 x 245
Gross Weight (kg)15.2
Label Width (mm)29.8
Label Height (mm)20.8
Input Configuration
DescriptionBlade Options for Q Series Wall Plug-in Power SuppliesData Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: Q-Blade Style Instruction Video




blades
User-added imageUser-added image
11                           12

INPUT CONNECTOR: Q-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "Q-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: Q-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: Q-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: Q-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: Q-EU(R)
05. Korean KS C8305 configuration: 2 pins, Class II; KR P/N: Q-KR(R)
06. Argentina IRAM 2073 configuration: 2 blades; AR P/N: Class II Q-AR(R)
07. China GB 2099 configuration: 2 blades, Class II; CN P/N:Q-CN(R)
08. India IS 1293 6A/SANS 164-3/BS546 configuration: 5A, 3 pins with Dummy Ground, Class II; IN P/N: Q-IN(R)
09. IEC320/C18 Inlet, Class II; P/N: Q-C18(R)
10. Brazilian NBR6147 configuration: 2 pins, Class II; BR P/N: Q-BR(R)
11. S. African SANS 164-1 configuration: 2 pins with Dummy Ground, Class II; SA P/N: Q-SANS164-1-16A(R)
12.  Israel / Malaysia / Singapore British Standard BS 546-15A configuration: 2 pins with Dummy Ground, Class II; P/N: Q-BS546-15A(R)

Kits

01. Q-KIT: 1,2,3,4 above
02. Q-KIT-INTL: 2,3,4 above
03. Q-KIT-6: 1,2,3,4,5,6 above
04. Q-KIT-7: 1,2,3,4,5,6,7 above
05. Q-KIT-8: 1,2,3,4,5,6,7,8 above

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added image
R32282

Taiwan BSMI (5V designs only); http://www.bsmi.gov.tw/wSite/ct?xItem=4072&ctNode=816&mp=2
No Logo CB Certificate IEC 60950-1:2005 (2nd Edition), Am 1: 2009, CB report IEC 60950-1:2005 (2nd Edition), Am 1: 2009 and EN 60950-1:2006 + Am 1:2010 + Am 11:2009 + Am 12:2011
User-added imageCCC to GB4943.1-2011 GB9254-2008 GB17625.1-2012, Tropical <2000
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
 
UL60950-1, cULus to UL 60950-1, 1st Edition, 2007-10-31 and CSA C22.2 No. 60950-1-03, 1st Edition, 2006-07
No LogoDesigned to meet EN 60601-1:2006 + A11:2011 +A1:2013 3rd Edition
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP52Ingress Protection: IP52 to IEC60529:2001 Protected against dust - limited ingress (no harmful deposit) and Protected against direct sprays up to 15 degrees from the vertical
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50313285, to J60950-1(H26) , J55022(H22),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added image
Korea KET KC Mark GT-41062-1805 SU10109-6001 (5V Only)
User-added image
Korea KET KC Mark GT-41062-1812 HU10499-9003A (12V Only)
User-added image
Korea KET KC Mark GT-41062-1812 HU10499-12008A (24V Only)
User-added imageEfficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)... NOTE: 24V & 1830 mm 18 - 20awg o/p cord only
LPSLimited Power Source
User-added imageEEV1191Natural Resources Canada (NRCan): CSA Standard C381.1-08, QSP NRCAN EEV1191; http://shop.csa.ca/en/canada/energy-efficiency/cancsa-c3811-08/invt/27024802008
User-added image
 
RCM certificate SAA-160017-EA; Australia and New Zealand Regulatory Compliance, Mark (http://rcm.standards.org.au/rcmfaq/rcmfaq.htm
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added image
IEC/EN60950-1
SIQ Mark License Certificate EN 60950-1:2006 + Am 1:2010+ Am 11:2009 + Am 12:2011
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
124171121.5Female Barrel 5.5 * 2.5 * 10mm with internal Spring Clip and Locking Notch or Equal
144054121.5Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
165721121.5Female Barrel 5.5*2.5*11mm, Right Angle w/ Spring Clip & Locking Notch or Equal
149017121.5Female Barrel 5.5*2.5*9.5mm, Right Angle with internal Spring Clip & Locking Notch or Equal
149000121.5MOLEX Micro-fit 3.0 (4) circuit connector HOUSING P/N:43025-0400 with MOLEX terminals P/N: 43030-0003 Female terminals or Equal
124213240.75Stripped 25 +/-1mm; Tinned 9 +/- 1mm or Equal
124223240.75Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
137728240.75Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
166905240.75Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
124187240.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
13757853.2Socket for interchangeable o/p connectors
16691053Female Barrel, Locking, 5.5 * 2.5 * 13.8mm w/ 4.0mm Thumb Screw or Equal
18252353.2Female Barrel 5.5*2.5*9.5mm with internal Spring Clip and Locking Notch or Equal
16382553.2Female Barrel 5.5*2.5*9.5mm No internal Spring Clip nor Locking Notch or Equal
124187240.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
124187240.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
124187240.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
124187240.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
124187240.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
124187240.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
124187240.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
124187240.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
124187240.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
124187240.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
124187240.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
124187240.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal

Request Info