Request Information Download PDF Configure Output Connector
GT-41134-06VV-x.x-W2 GT-41134-06VV-x.x-W2
Information
Model NumberGT-41134-06VV-x.x-W2
DescriptionGT-41134-06VV-x.x-W2, ITE Power Supply, 60601-1-4th Ed. , Wall Plug-in, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, NEMA 1-15P, North America Blades, Class II 2 Conductors, Output Rating: 6 Watts, 3.3-24V in 0.1V increments, Approvals: CE Level V RoHS 2 LPS Double Insulation CB UL/cUL FCC WEEE EAC PSE PSE PSE C-Tick
Agency Documentshttp://www.globtek.info/certs/GT-41134-W2Z%20Fixed%20Blades/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0O30000008UleUEAS
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0O30000008UleUEAS
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC
CategoryITE Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.3A
Wattage (W)6
Vout Range (V)3.3-24
EfficiencyV
Ingress Protection
Size (mm)41*62*32
EnclosureUser-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-41134-0503-W2 3.31.54.95 RFQ
GT-41134-0606-2.7 3.31.23.96 RFQ
GT-41134-0604-0.7-W2 3.35001650 RFQ
GT-41134-0603-W2 3.31.85.94 RFQ
GT-41134-0604-W2 41.56 RFQ
GT-41134-0504-W2 41.255 RFQ
GT-41134-0506-1.0-W2 515 RFQ
GT-41134-0606-1.0-W2 51.26 RFQ
GT-41134-0606-W2 616 RFQ
GT-41134-0506-W2 60.834.98 RFQ
GT-41134-0612-3.0-W2 90.676.03 RFQ
GT-41134-0512-3.0-W2 90.554.95 RFQ
GT-41134-0512-W2 120.425.04 RFQ
GT-41134-0612-W2 120.56 RFQ
GT-41134-0615-W2 150.46 RFQ
GT-41134-0515-W2 150.334.95 RFQ
GT-41134-0618-W2 180.335.94 RFQ
GT-41134-0518-W2 180.285.04 RFQ
GT-41134-0624-W2 240.256 RFQ
GT-41134-0524-W2 240.215.04 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01.Input Voltage: Specified 90-264 Vac, Nameplate rated 100-240 Vac
02.Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60 Hz
03. Output Regulation: +/- 5% measured at the output connector measured at the end of a 1 meter USB cordset employing #22 Gauge conductors
04. Line Voltage Regulation: +/- 1% typical measured at the output connector measured at the end of a 1 meter USB cordset employing #22 Gauge conductors
05. Output Ripple (Vp-p): +/-1% or 100 mV whichever is greater measured at the end of a 1 meter USB cordset employing #22 Gauge conductors. Measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector.
06. Turn-ON Delay: 1 Second, typical
07. Hold-Up Time: 8 mS typical at nominal input voltage and full load
08. Inrush Current: 30A typicall at 115VAC input and 60Atypical at 230VAC input
09. Switching Frequency: 65 KHz typical

B) PROTECTION
01. Over-Voltage: Protected Zener clamp across the output
02. Short Circuit: Protected unit will auto recover upon removal of fault
03. Input Protection: Input line fusing

C) SAFETY
01. Dielectric Withstand Voltage: 4242Vdc from primary to secondary
02. Touch Current: <0.25mA @ 240Vac input voltage

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 59.8 x 26.6 x 46.1mm +/- 1.0
03. Markings: Label and/or Pad Printed and/or Molded in the case
Derating Curve
Qty (ea.)/Carton160
Individual Box/Gift Box Size (mm)34*80*77
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)340 x 405 x 304
Gross Weight (kg)20
Label Width (mm)17.0
Label Height (mm)17.0
Input Configuration
DescriptionNEMA 1-15P, North America Blades, Class II 2 ConductorsAll NEMA 1 devices are two-wire non-grounding devices (hot-neutral) rated for 125 V maximum. NEMA 1-15P plugs have two parallel flat blades, 0.25 inches (6.35 mm) wide, 0.06 inches (1.524 mm) thick, 0.625-0.718 inches (15.875–18.256 mm) long, and spaced 0.5 inches (12.7 mm) apart.
Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added image
C-Tick GT-41134 N18647 SAA120858EA

No Logo Applicable

IEC 60950-1:2005 (Second Edition) + A1:2009 + A2:2013
User-added image  CE Certification Class II CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15 B
User-added imageUL60950-1, cULus to UL 60950-1, 2nd Edition, 2007-03-27 and CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image  Certification # TC RU AR46.B.75423 Custom Union of Russia, Belarus and Kazakhstan
User-added image
FCC PART 15 CLASS B
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50315169, to J60950-1(H26) , J55022(H22),[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50315866, to J60950-1(H26) , J55022(H22),[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50315866, to J60950-1(H26) , J55022(H22),[DC15V≤30V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
 User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
LPSLimited Power Source
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
175291120.5Female Barrel 3.5*1.1*11mm, Locking , Insert Pin#3511TV200(01) or Equal
15253012.5Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
198605120.5MOLEX P/N:43025-0400 Micro-fit 3.0 (4) circuit connector housing with 4 X Molex P/N: 43030-0001 Female terminal or Equal with overmold
168872120.5Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
389242180.33Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
197674240.21Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
2182453.31.8Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
1672583.30.5(2) * 1/4" Insulated "Fast On" Female Terminals
2240783.31.8Female Barrel 5.5*2.5*11mm, Right Angle w/ Spring Clip & Locking Notch or Equal
1843973.30.5Stripped 25 +/-5mm; Tinned 8 +/- 2mm or Equal, With Black Shrink Tubing, 15mm long
2182463.31.8Female Barrel 5.5 * 2.1 * 13.8 mm w/ 4 mm Thumb Screw or Equal
17978251.2Female Barrel Straight EIAJ1 2.35 * 0.7 * 9.5mm with internal Spring Clip and Locking Notch or Equal
19204351.2Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
17751951.2Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
17724551.2Mini-B USB 5 Pin Type "B" or Equal with 200 Ohm resistor between Pin 2 & 3
21824251.2Female Barrel 5.5 * 2.1 * 13.8 mm w/ 4 mm Thumb Screw or Equal
17293351.2Stripped 50 +/-5mm; Tinned 9.5 +/- 2mm or Equal
18280451.2Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
17122851.2Female Barrel, Right Angle 3.5 * 1.35 * 9.5mm with internal Spring Clip and Locking Notch or Equal
17121051.2Female Barrel 3.5*1.35*9.5mm, with Locking Notch and Spring Clip or Equal
17101151.2Female Barrel Right Angle, 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
16818051.2Female Barrel 3.5*1.35*9.0 mm, with Internal Spring Clip and Locking Notch or Equal
16816651.2Female Barrel Right Angle, 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
17133151.2Mini-B USB 5 Pin Type "B" or Equal with 200 Ohm resistor between Pin 2 & 3
18936861Female Barrel Right Angle, 5.5*2.1*12mm No internal Spring Clip nor Locking Notch or Equal
17101561Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
16716261PCB Pins 4.5mm L x 1.5mm Dia
22574161Female Barrel 5.5*2.5*11mm, Right Angle w/ Spring Clip & Locking Notch or Equal
17548190.67Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
17325190.67Stripped 50 +/-5mm; Tinned 9.5 +/- 2mm or Equal
16796490.67Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
17758190.67Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
17978251.2Female Barrel Straight EIAJ1 2.35 * 0.7 * 9.5mm with internal Spring Clip and Locking Notch or Equal

Request Info