Request Information Download PDF Configure Output Connector
GT-86180-18VV (F Blade) GT-86180-18VV (F Blade)
Information
Model NumberGT-86180-18VV (F Blade)
DescriptionGT-86180-18VV (F Blade), ITE Power Supply, Wall Plug-in, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60Hz, Blade Options for F- Series Wall Plug-in Power Supplies, Output Rating: 18 Watts, 12VV in 0.1V increments, Approvals: PSE
Agency Documentshttp://en.globtek.com/safety-agency-documents-pending/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000MmpASEAZ
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000MmpASEAZ
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC
CategoryITE Power Supply
Input Voltage100-240V~, 50-60Hz
I/P Amps (A)1A
Wattage (W)18
Vout Range (V)12V
EfficiencyVI
Ingress ProtectionIPX0
Size (mm)73.5(L) *35(W) *53(H)
EnclosureUser-added image


 
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-86180-1812 121.518 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Line Regulation: ± 5%
04. Load regulation: ±5%
05. Ripple and Noise (Vp-p): 300 mVp-p maximum, At 20 MHz, and output parallel with 0.1uF &
10uF capacitors to ground, Temperature at 25 ‘C, and nominal AC input voltage
06. Average Efficiency: 73.77% minimum , At nominal input voltage average Efficiency meet CEC VI
07. Turn-ON Delay: 3 Seconds maximum

B) PROTECTION
01. Over-Voltage: 10V maximum
02. Over current protection: 1.5A maximum with auto-recovery function
03. Short Circuit: The adapter shall not be damaged by short the DC output to Ground.

C) SAFETY
01. Dielectric Withstand Voltage: Primary To Secondary: 3000VAC 10mA 1minute or 4242VDC 10mA 1minute
02. Leakage Current:20uA maximum, at nominal AC input voltage and frequency


D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -20°C to 60°C
05. Cooling: natural convection cooling
06. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Markings: Label and/or Pad Printed and/or Molded in the case
Derating CurveUser-added image
Qty (ea.)/Carton
Individual Box/Gift Box Size (mm)
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)TBD
Gross Weight (kg)
Label Width (mm)39.7
Label Height (mm)16.2
Input Configuration
DescriptionBlade Options for F- Series Wall Plug-in Power SuppliesUser-added image

INPUT CONNECTOR: F-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "F-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: F-NA(R)
02. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: F-EU(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: F-UK(R)
04. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: F-SAA(R)

F-KIT: 1,2,3 and 4 above
 

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50313285, to J60950-1(H26) , J55022(H22),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/

Request Info