Request Information Download PDF Configure Output Connector
GTM21089-WWVV-T2 GTM21089-WWVV-T2
Information
Model NumberGTM21089-WWVV-T2
DescriptionGTM21089-WWVV-T2, Medical Power Supply, Desktop/External, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, IEC 60320/C8 AC Inlet connector, Class II, Non-Earth Ground (aka "Figure-8"), Output Rating: 19 Watts, 3.3-48V in 0.1V increments, Approvals: VCCI Ukraine GOST-R WEEE China RoHS PSE CE SIQ Korea (12V Only) Double Insulation RoHS 2 cRUus IP40
Agency Documentshttp://www.globtek.info/certs/GTM21089/
CE EC-Declaration for Medicalhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000C2XV3EAN
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000C2XV3EAN
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeDesktop/External
TechnologyRegulated Switchmode AC-DC
CategoryMedical Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.5A MAX
Wattage (W)19
Vout Range (V)3.3-48
EfficiencyMeets/Exceeds for Medical
Ingress ProtectionIP40
Size (mm)87*47*32
EnclosureUser-added image


Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GTM21089-0903-T2 3.32.68.58 RFQ
GTM21089-1305-T2 52.613 RFQ
GTM21089-1305-T2 52.613 RFQ
GTM21089-1506-T2 62.515 RFQ
GTM21089-1506-T2 62.515 RFQ
GTM21089-1509-1.5-T2 7.5215 RFQ
GTM21089-1509-T2 91.715.3 RFQ
GTM21089-1509-T2 91.715.3 RFQ
GTM21089-1512-T2 121.2515 RFQ
GTM21089-1512-T2 121.2515 RFQ
GTM21089-1815-T2 151.218 RFQ
GTM21089-1815-T2 151.218 RFQ
GTM21089-1818-T2 18118 RFQ
GTM21089-1818-T2 18118 RFQ
GTM21089-1824-T2 240.7518 RFQ
GTM21089-1824-T2 240.7518 RFQ
GTM21089-1848-12.0-T2 360.518 RFQ
GTM21089-1948-T2 480.3918.72 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector
04. Line Voltage Regulation: +/- 1% typical measured at full load
05. Output Ripple : 1% of output voltage, peak to peak, typical
06. Turn-ON/OFF: 5% maximum,1 mS typical recovery time for 25% step load
07. Turn-ON Delay: 1 Second, typical
08. Hold-Up Time: 10 mS typical at nominal input voltage and full load
09. Inrush Current: 30A typical at 115Vac and 40A typical at 230Vac input
10. Switching Frequency: 100 KHz typical, varies with line and load
11. Efficiency: 75% typical at nominal input and full load

B) PROTECTION
01. Over-Voltage: limited by crowbar method
02. Over Load/Short Circuit: Momentary short circuit protected, output will auto recovery upon removal of short
03. Input Protection: Input line fusing

C) SAFETY
01. Dielectric Withstand Voltage: 5656 Vdc from primary to secondary (for Class II with functional ground)
02. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition)

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection
06. RoHS 2: Complies with EU 2011/65/EU China SJ/T 11363-2006

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 86.5*47.0*32.0 +/-0.5 mm
03. Markings: Label and/or Pad Printed and/or Molded in the case
Derating Curve
Qty (ea.)/Carton60
Individual Box/Gift Box Size (mm)147*100*33
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)455 x 405 x 220
Gross Weight (kg)12.8
Label Width (mm)36.0
Label Height (mm)47.5
Input Configuration
DescriptionIEC 60320/C8 AC Inlet connector, Class II, Non-Earth Ground (aka "Figure-8")User-added image

Mates with IEC 60320/C7 Plug

Standard International IEC 320/C7 Cordsets

Below are standard cordsets which are "not included" (unless stated above); these may be purchased separately or packaged with the power supply. Please contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.
 

2 Conductors (No Ground) IEC 320/C7 (Figure "8")

4511116F703A(R)

N. American

NEMA 1-15P

IEC 320/C7

1830

6

5014112M703A(R)

Australian

AS 3112

IEC 320/C7

2000

7

4533501M8703(R)

China

GB 2099.1

IEC 320/C7

1830

6

2074112M703A(R)

European

CEE 7/16

IEC 320/C7

2000

7

451J3401M8703(R)

Japan

JIS 8303

IEC 320/C7

1830

6

6104112M703A(R)

UK

BS1363

IEC 320/C7

2000

7

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added image60601-1 3rd Operating Instructions
User-added image  CE Mark: tested to comply with EN 60601-1-2:2007 Medical electrical equipment Part 1-2: - Mark is on the label or Molded in the case
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added imagecRUus UL Recognized Component E172861 3rd Edition w-RM ANSI-AAMI ES60601-1 (2005 + C1:09 + A2:10) and CAN-CSA-C22.2 No. 60601-1 (2008)
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP40Ingress Protection: IP40 to IEC60529:2001 Protection against granular foreign bodies
User-added image
Korea KET KC Mark GTM21089-1512-T2 HU10040-4016C (12V Only)
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added image
IEC/EN60601-1
SIQ Mark License EN60601-1
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
100758121.25Female Barrel 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
113793121.25Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
199280181.0Male DC Jack for 2.1x5.5mm connector
199186181.0Male DC Jack for 2.1x5.5mm connector
198616181.0Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
12778152.6Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
12936652.6Female Barrel 4.0*1.7*10mm with Spring Load/Locking Notch or Equal
19836052.6Female Barrel 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
1005406.52.3Female Barrel 5.5*2.1*14mm w/ Spring Clip & Locking Notch or Equal
1366307.52.0Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
13663791.7Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal

Request Info