Request Information Download PDF Configure Output Connector
GTM41076-06VV-Q 2MOOP GTM41076-06VV-Q 2MOOP
Information
Model NumberGTM41076-06VV-Q 2MOOP
DescriptionGTM41076-06VV-Q 2MOOP, Medical Power Supply, 60601-1-4th Ed. , Wall Plug-in, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, Blade Options for Q Series Wall Plug-in Power Supplies, Output Rating: 6 Watts, 5-30V in 0.1V increments, Approvals: GOST-R Ukraine CE PSE CB China RoHS WEEE RoHS 2 Double Insulation VCCI Class 2 NrCAN cRUus India Taiwan BSMI CCC Level V IP40 SIQ CE
Agency Documentshttp://www.globtek.info/certs/GTM41076/
CE EC-Declaration for Medicalhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000BzyHWEAZ
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000BzyHWEAZ
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC
CategoryMedical Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.16A-0.1A
Wattage (W)6
Vout Range (V)5-30
EfficiencyMeets/Exceeds for Medical
Ingress ProtectionIP40 (IP52 Option Available)
Size (mm)74*44*34
EnclosureUser-added image

 
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GTM41076-0605 51.26 RFQ
GTM41076-0606 616 RFQ
GTM41076-0607 70.855.95 RFQ
GTM41076-0609-0.5 8.50.7055.99 RFQ
GTM41076-0609 90.665.94 RFQ
GTM41076-0612 120.56 RFQ
GTM41076-0615 150.46 RFQ
GTM41076-0618 180.335.94 RFQ
GTM41076-0620 200.36 RFQ
GTM41076-0624 240.256 RFQ
GTM41076-0630 300.164.8 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
1. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
2. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
3. Output Power (Rated): 6Watts maximum
4. Output Regulation: +/- 5% measured at the output connector
5. Line Voltage Regulation: +/- 1% typical measured at the output connector
6. Output Ripple (Vp-p): +/-1% or 150 mV whichever is greater at nominal output voltage. Measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector.
7. Turn-On/Turn-Off Overshoot: 5% maximum, 500us maximum recovery time for 25% step load.
8. Turn-On Delay: 3000mSEC maximum
9. Hold-Up Time: 8mSec maximum at nominal input and full load.
10. Inrush Current: 30A typical @ 115Vac input ; 60A typical @ 230Vac input
11. Switching Frequency: 66.5 KHz typical

B) PROTECTION
1. Over-Voltage: Protected unit will recover upon removal of fault
2. Short Circuit: Electronically Protected, unit will recover upon removal of fault
3. Input Protection: Input line fusing

C) SAFETY
1. Dielectric Withstand Voltage: 5656Vdc from primary to secondary
2. Earth Leakage Current: N/A for Class II units, there is no PE Ground pin, so Earth Leakage current is not measured
3. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition)
4. Means of Protection: 2 x MOOP

D) OTHER:
1. MTBF: 200,000 hours @ 25°C ambient temperature
2. Operating Temperature: 0°C to 40°C ambient temperature
3. Humidity: 0% to 90% relative humidity
4. Storage Temperature: -40°C to 80°C

E) ENCLOSURE
1. Upper Housing: High impact plastic, 94V0 polycarbonate, non-vented
2. Lower Housing: High impact plastic, 94V0 polycarbonate, non-vented
3. Size: 43.5*74.0*35.3 +/-1.0 mm
Derating Curve
Qty (ea.)/Carton80
Individual Box/Gift Box Size (mm)90.5*73*53
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)388 x 380 x 245
Gross Weight (kg)15.2
Label Width (mm)29.8
Label Height (mm)20.8
Input Configuration
DescriptionBlade Options for Q Series Wall Plug-in Power SuppliesData Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: Q-Blade Style Instruction Video




blades
User-added imageUser-added image
11                           12

INPUT CONNECTOR: Q-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "Q-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: Q-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: Q-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: Q-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: Q-EU(R)
05. Korean KS C8305 configuration: 2 pins, Class II; KR P/N: Q-KR(R)
06. Argentina IRAM 2073 configuration: 2 blades; AR P/N: Class II Q-AR(R)
07. China GB 2099 configuration: 2 blades, Class II; CN P/N:Q-CN(R)
08. India IS 1293 6A/SANS 164-3/BS546 configuration: 5A, 3 pins with Dummy Ground, Class II; IN P/N: Q-IN(R)
09. IEC320/C18 Inlet, Class II; P/N: Q-C18(R)
10. Brazilian NBR6147 configuration: 2 pins, Class II; BR P/N: Q-BR(R)
11. S. African SANS 164-1 configuration: 2 pins with Dummy Ground, Class II; SA P/N: Q-SANS164-1-16A(R)
12.  Israel / Malaysia / Singapore British Standard BS 546-15A configuration: 2 pins with Dummy Ground, Class II; P/N: Q-BS546-15A(R)

Kits

01. Q-KIT: 1,2,3,4 above
02. Q-KIT-INTL: 2,3,4 above
03. Q-KIT-6: 1,2,3,4,5,6 above
04. Q-KIT-7: 1,2,3,4,5,6,7 above
05. Q-KIT-8: 1,2,3,4,5,6,7,8 above

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector






YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) USBC Type (USB Type C) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added image
 
Bureau Of Indian Standards for GTM41076-0605(5V only)
User-added image
R32282
 
Taiwan BSMI GTM41076 R32282 5V, 6V,7V,9V, 12V,15V,18V, 20V,24V,30Vhttp://www.bsmi.gov.tw/wSite/ct?xItem=4072&ctNode=816&mp=2
User-added imageCaution/Attention
No Logo ApplicableCB report IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007) and or EN 60601-1:2006 3rd Edition including 2MOOP requirements
User-added image
CCC to GB4943.1-2011, Tropical <2000
User-added image  CE Mark: tested to comply with EN61000-3-2, EN61000-3-3 and EN50082-1, including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61001-1-2-2007 EMI: Complies with EN55011 CLASS B and FCC Part 15 B
User-added image  Test standard: EN 60601-1-2: 2015
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added imageCLASS 2 POWER SUPPLY Text
User-added imagecRUus UL Recognized Component E341350 3rd Edition w-RM ANSI-AAMI ES60601-1 (2005 + C1:09 + A2:10) and CAN-CSA-C22.2 No. 60601-1 (2008)
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP40Ingress Protection: IP40 to IEC60529:2001 Protection against granular foreign bodies (with I/P cord)
 User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
User-added imageMEDICAL POWER SUPPLY Text
User-added imageEEV1191Natural Resources Canada (NRCan): CSA Standard C381.1-08, QSP NRCAN EEV1191; http://shop.csa.ca/en/canada/energy-efficiency/cancsa-c3811-08/invt/27024802008
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
User-added image
 
Australia and New Zealand Regulatory Compliance, Mark (http://rcm.standards.org.au/rcmfaq/rcmfaq.htm
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added image
 
IEC 60601-1:2005 (Third Edition) + CORR. 1:2006 + CORR. 2:2007 + A1:2012 (or IEC 60601-1: 2012 reprint)
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
17139410.20.59Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
166793120.5Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
175677120.5Female Barrel 5.5*2.5*11mm, Right Angle without internal Spring Clip & Locking Notch or Equal
195922120.5Female Barrel 5.0*1.95*14mm (DIN 45323) or equivalent
117862120.5Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
170996120.52 Pin DC Jack
164167120.5Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
164068120.5Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
137924120.5Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
14412312.5Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
149064120.5Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
171130150.4Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
165966150.4Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
117917150.4Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
174732150.4Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
189958240.25Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
16725551.2Female Barrel 4.0*1.7*11mm or Equal
16717651.2Strip & Tin 12mm or Equal
16879351.2Micro-B USB 5 Pin Type "B" or Equal
16982151.22 Pin DC Jack
16863151.2Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or Equal
20149751.2Stripped 50+/-5mm, Tinned 9+/-2mm
18491651.2Mini-B USB 5 Pin Type "B" or Equal
18252951.2Micro-B USB 5 Pin Type "B" or Equal
19724651.2Stripped 25+/-5mm, Tinned 8+/-2mm with Black Thermal Contracting Sleeve length 15 mm or Equal
11750551.2Micro-B USB 5 Pin Type "B" or Equal
16635451.2Mini-B USB 5 Pin Type "B" or Equal with 200 Ohm resistor between Pin 2 & 3
13754251.2Mini-B USB 5 Pin Type "B" or Equal
12767751.2Female Barrel 5.5 * 2.5 * 10mm No internal Spring Clip nor Locking Notch or Equal
17521651.2Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or Equal
17523651.2Micro-B USB 5 Pin Type "B" or Equal
17780551.2Female Barrel Right Angle, CUI P/N PP-017, 0.9*3.2*9.0mm with internal Spring loaded and Locking Notch. NO EQUIVALENTS.
17780751.2Female Barrel Straight 0.9*3.2*9.0mm without internal Spring Clip nor Locking Notch or Equal
17781051.2Female Barrel Right Angle, 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
1959745.21.15Micro-B USB 5 Pin Type "B" or Equal
1959725.21.15Micro-B USB 5 Pin Type "B" or Equal
17121561Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
1241588.50.705Female Barrel Right Angle, 5.5*2.1*11mm with NO internal Spring Clip NOR Locking Notch or Equal
16435590.5Female Barrel Right Angle, 5.5*2.1*13mm No internal Spring Clip nor Locking Notch or Equal
1707659.250Female Barrel 5.5*2.1*12.5mm w/Spring Clip and Locking Notch or Equal
1707659.250Female Barrel 5.5*2.1*12.5mm w/Spring Clip and Locking Notch or Equal

Request Info