GTM93053P-FW-F2 Open Frame/Internal ICT/ITE Power Supply
| GTM93053P-FW-F2 | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | GTM93053P-FW-F2, ICT/ITE Power Supply, Open Frame/Internal, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Molex 09-65-2038 3 Position Header Pin 1: Neutral, Pin 2: Removed, Pin 3: Line, Output Rating: 150 Watts, Power rating with convection cooling (W) , 16V in 0.1V increments, Approvals: | ||||||||||||||||
Information | |||||||||||||||||
| Model Number | GTM93053P-FW-F2 | ||||||||||||||||
| Agency Documents | http://www.globtek.info/certs | ||||||||||||||||
| CE EC-Declaration for Medical | Contact GlobTek for more information | ||||||||||||||||
| CE EC-Declaration for Industrial/Commercial/ITE | Contact GlobTek for more information | ||||||||||||||||
| CE EC-Declaration for Household | Contact GlobTek for more information | ||||||||||||||||
| UKCA-Declaration for Medical | Contact GlobTek for more information | ||||||||||||||||
| UKCA-Declaration for Industrial/Commercial/ITE | Contact GlobTek for more information | ||||||||||||||||
| UKCA-Declaration for Household | Contact GlobTek for more information | ||||||||||||||||
| Morocco SDoC Declaration | https://cs.globtek.info/Morocco_SDoC_Declaration?id=a0Oa000000LN01mEAD | ||||||||||||||||
| RoHS/RoHS3 Declaration | https://www.globtek.com/pdf/rohs_cert/a0Oa000000LN01mEAD | ||||||||||||||||
| Prop 65 Statement | https://www.globtek.com/r2/PH7CNf | ||||||||||||||||
| REACH Declaration | https://www.globtek.com/r2/eM2co8 | ||||||||||||||||
| Conflict Minerals Declaration | https://www.globtek.com/r2/vZY8R5 | ||||||||||||||||
Model Parameters | |||||||||||||||||
| Type | Open Frame/Internal | ||||||||||||||||
| Technology | Regulated Switchmode AC-DC Power Supply AC Adaptor | ||||||||||||||||
| Category | ICT/ITE Power Supply | ||||||||||||||||
| Input Voltage Range (V) | 100-240V~, 50-60 Hz | ||||||||||||||||
| Max Input Current (A) | TBD | ||||||||||||||||
| Max Output Power Rating (W) | 150 | ||||||||||||||||
| Output Voltage Range (V) | 16 | ||||||||||||||||
| Efficiency | V | ||||||||||||||||
| Ingress Protection | |||||||||||||||||
| Size (mm) | 150x123x20 | ||||||||||||||||
| Enclosure | TBD | ||||||||||||||||
Rating Table | |||||||||||||||||
* (Final ordering #/Part No to be defined) | |||||||||||||||||
Specifications | |||||||||||||||||
| A) ELECTRICAL SPECIFICATIONS: 01. Input Voltage: Specified 90-264 Vac, Nameplate rated 100-240 Vac 02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60 Hz 03. Output Regulation: +/- 5% measured at the output connector 04. Line Voltage Regulation: +/- 2% typical measured at full load 05. Output Ripple (Vp-p): +/-1% or 150mV whichever is greather at nominal output voltage. Measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line 06. Turn-ON/OFF Overshoot: 5% maximum, 500uS typical recovery time for 25% to 50% step load 07. Turn-ON Delay: 2 Seconds, maximum @ full load, nominal line 08. Hold-Up Time: 8 mS typical @ nominal input voltage and full load 09. Inrush Current: 40/60A maximum cold start @ 115/230Vac input 10. Switching Frequency: 100 KHz typical B) PROTECTION 1. Over-Voltage: Protected with a Zener diode clamp across the output 2. Short Circuit: Hiccup with auto recovery 3. Over-load: Hiccup with auto recovery 4. Input Protection: Input line and neutral fusing 5. Means of Patient Protection: (2 x MOPP) C) SAFETY 01. Dielectric Withstand Voltage: 5656Vdc from primary to secondary 02. Earth Leakage Current: N/A for Class II units, there is no PE Ground pin, so Earth Leakage current is not measured 03. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition) 04. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006 D) OTHER: 1. MTBF: 200,000 Hours @ 25°C ambient temperature 2. Operating Temperature: 0°C to 40°C ambient temperature 3. Humidity: 0% to 90% relative humidity 4. Storage Temperature: -10°C to 80°C 5. Cooling: Convection E) ENCLOSURE 1. Open Frame 2. Size: 122*63.5*34 +/-1.0 mm 3. LED: Standard Green color to indicate power out (other colors available) | |||||||||||||||||
| Derating Curve | |||||||||||||||||
| Qty (ea.)/Carton | TBD | ||||||||||||||||
| Individual Box/Gift Box Size (mm) | TBD | ||||||||||||||||
| Individual Box/Gift Box Color | TBD | ||||||||||||||||
| Master Carton Size (mm) | TBD | ||||||||||||||||
| Gross Weight (kg) | |||||||||||||||||
| Label Width (mm) | null | ||||||||||||||||
| Label Height (mm) | null | ||||||||||||||||
Input Configuration | |||||||||||||||||
| Description | Molex 09-65-2038 3 Position Header Pin 1: Neutral, Pin 2: Removed, Pin 3: LineDocument: http://www.molex.com/pdm_docs/sd/009652038_sd.pdf Catalog Page: http://www.molex.com/molex/products/datasheet.jsp?part=active/0009652038_PCB_HEADERS.xml Mates With Part(s):5195 SPOX™ Crimp Housing, 5239 KK® Crimp Housing
| ||||||||||||||||
| Approvals | |||||||||||||||||
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice. Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation. | |||||||||||||||||
| |||||||||||||||||