GT-R5100-10VV-x.x-USB (J-Blades) Wall Plug-in ICT/ITE Power Supply/Class 2 Power Unit
GT-R5100-10VV-x.x-USB (J-Blades) | |||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
GT-R5100-10VV-x.x-USB (J-Blades), ICT/ITE Power Supply/Class 2 Power Unit, Wall Plug-in, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Blade Options for J Series Wall Plug-in Power Supplies, Output Rating: 10 Watts, Power rating with convection cooling (W) , 5VV in 0.1V increments, Approvals: | |||||||||||||||||||||||
Information | |||||||||||||||||||||||
Model Number | GT-R5100-10VV-x.x-USB (J-Blades) | ||||||||||||||||||||||
CE EC-Declaration for Medical | Contact GlobTek for more information | ||||||||||||||||||||||
CE EC-Declaration for Industrial/Commercial/ITE | Contact GlobTek for more information | ||||||||||||||||||||||
CE EC-Declaration for Household | Contact GlobTek for more information | ||||||||||||||||||||||
UKCA-Declaration for Medical | Contact GlobTek for more information | ||||||||||||||||||||||
UKCA-Declaration for Industrial/Commercial/ITE | Contact GlobTek for more information | ||||||||||||||||||||||
UKCA-Declaration for Household | Contact GlobTek for more information | ||||||||||||||||||||||
Morocco SDoC Declaration | https://cs.globtek.info/Morocco_SDoC_Declaration?id=a0Oa000000MnG4CEAV | ||||||||||||||||||||||
RoHS/RoHS3 Declaration | https://www.globtek.com/pdf/rohs_cert/a0Oa000000MnG4CEAV | ||||||||||||||||||||||
Prop 65 Statement | https://www.globtek.com/r2/PH7CNf | ||||||||||||||||||||||
REACH Declaration | https://www.globtek.com/r2/eM2co8 | ||||||||||||||||||||||
Conflict Minerals Declaration | https://www.globtek.com/r2/vZY8R5 | ||||||||||||||||||||||
Model Parameters | |||||||||||||||||||||||
Type | Wall Plug-in | ||||||||||||||||||||||
Technology | Regulated Switchmode AC-DC Power Supply AC Adaptor | ||||||||||||||||||||||
Category | ICT/ITE Power Supply/Class 2 Power Unit | ||||||||||||||||||||||
Input Voltage Range (V) | 100-240V~, 50-60 Hz | ||||||||||||||||||||||
Max Input Current (A) | 0.3A | ||||||||||||||||||||||
Max Output Power Rating (W) | 10 | ||||||||||||||||||||||
Output Voltage Range (V) | 5V | ||||||||||||||||||||||
Efficiency | V | ||||||||||||||||||||||
Ingress Protection | Indoor Use | ||||||||||||||||||||||
Size (mm) | 73.5.0 x 31.0 x 47.5.0 | ||||||||||||||||||||||
Enclosure | |||||||||||||||||||||||
Rating Table | |||||||||||||||||||||||
* (Final ordering #/Part No to be defined) | |||||||||||||||||||||||
Specifications | |||||||||||||||||||||||
A) ELECTRICAL SPECIFICATIONS: 1. Input Voltage: Specified 90-264 Vac, Nameplate rated 100-240 Vac 2. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60 Hz 3. Output Regulation: +/- 5% measured at the end of a 0.6 meter USB cordset employing #22 Gauge conductors 4. Line Voltage Regulation: +/- 3% typical measured at the end of a 0.6 meter USB cordset employing #22 Gauge conductors 5. Output Ripple (Vp-p): 150mV Ripples shall be measured with a 47uF electrolytic capacitor paralleled with a high-frequency 0.1uF ceramic capacitor across the output. The oscilloscope's bandwidth shall be set to 20MHz. 6. Turn-On/Turn-Off Overshoot: 5% maximum, 500 us maximum recovery time for 25% step load. 7. Turn-On Delay: 3000mS MAX at 115VAC Full Load 8. Hold-Up Time: 8mS Min at 100VAC Full Load 9. Inrush Current: No damage. On power when switching on/off repeatedly under any condition. 10. Switching Frequency: 66.5 KHz typical B) PROTECTION 1. Over-Voltage: Output shut down and auto restart 2. Over Temperature Protection: Output shut down and auto restart 3. Short Circuit Protection Output shut down and auto restart 4 Over Load Protection Output shut down and auto restart 5. Input Protection: Input line fusing C) SAFETY 1. Dielectric Withstand Voltage: 3000Vac or 4646Vdc 10mA 1 minute 2. Earth Leakage Current: N/A for Class II units, there is no PE Ground pin, so Earth Leakage current is not measured 5. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006 D) OTHER: 1. MTBF: 200,000 hours @ 25°C ambient temperature 2. Operating Temperature: 0°C to 40°C ambient temperature 3. Humidity: 0% to 95% relative humidity 4. Storage Temperature: -40°C to 80°C E) ENCLOSURE 1. Housing: High impact plastic, 94V0 polycarbonate, non-vented 2. Size: 73.5 x 31.0 x 47.5 mm +/-1.0 mm 3. Markings: Label and/or Pad Printed and/or Molded in the case | |||||||||||||||||||||||
Derating Curve | |||||||||||||||||||||||
Qty (ea.)/Carton | 210 | ||||||||||||||||||||||
Individual Box/Gift Box Size (mm) | |||||||||||||||||||||||
Individual Box/Gift Box Color | |||||||||||||||||||||||
Master Carton Size (mm) | 544 x 375 x 151 | ||||||||||||||||||||||
Gross Weight (kg) | 14.8 | ||||||||||||||||||||||
Label Width (mm) | 28.5 | ||||||||||||||||||||||
Label Height (mm) | 17.5 | ||||||||||||||||||||||
Input Configuration | |||||||||||||||||||||||
Description | Blade Options for J Series Wall Plug-in Power SuppliesData Sheet: http://en.globtek.com/interchangeable-blades.php Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf Video: J-Blade Style Instruction Video INPUT CONNECTOR: J-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "J-KIT" if specified 01. United States / Canada / Japan NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: J-NA(R) Kits 01. J-KIT: 1,2,3,4 above | ||||||||||||||||||||||
Output Configuration | |||||||||||||||||||||||
Common output connector options: Click to add to your request.
Comprehensive list of GlobTek output cordset options Contact GlobTek for your specific requirements or custom solutions. | |||||||||||||||||||||||
Approvals | |||||||||||||||||||||||
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice. Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation. | |||||||||||||||||||||||
|