BL0900CAA651S1P****** Battery Cylindrical Can Class 2 Power Supply

BL0900CAA651S1P******
BL0900CAA651S1P******, Class 2 Power Supply, Battery Cylindrical Can, Battery Li-Ion, , Input Rating: 100-240V~, 50-60Hz, , Output Rating: 12 Watts, Power rating with convection cooling (W) , V in 0.1V increments, Approvals: IEC 62133; UL 62133; Sea transport; Sea transport;BL0900CAA651S1P******, Class 2 Power Supply, Battery Cylindrical Can, Battery Li-Ion, , Input Rating: 100-240V~, 50-60Hz, , Output Rating: 12 Watts, Power rating with convection cooling (W) , V in 0.1V increments, Approvals: IEC 62133; UL 62133; Sea transport; Sea transport;
Information
Guidelines and cautions, Safety Notes, and Safety Precautions published on GlobTek’s website
Model NumberBL0900CAA651S1P******
Agency Documentshttp://www.globtek.info/certs/BL0900CAA651S1PCBT/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for MedicalContact GlobTek for more information
UKCA-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declarationhttps://cs.globtek.info/Morocco_SDoC_Declaration?id=a0O3a00000MnvAeEAJ
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0O3a00000MnvAeEAJ
Prop 65 Statementhttps://www.globtek.com/r2/PH7CNf
REACH Declarationhttps://www.globtek.com/r2/eM2co8
Conflict Minerals Declarationhttps://www.globtek.com/r2/vZY8R5
Model Parameters
TypeBattery Cylindrical Can
TechnologyBattery Li-Ion
ChemistryLi-Ion
Cell Rated Capacity (mAh)900
Cell Nominal Voltage3.7
Cell GeometryCylindrical
Cell Length65
Cell Width
Cell Height
Cell Diameter14
Enclosure 
 MODEL OPTIONS (SEE SPEC FOR SPECIFIC CONFIGURATION)
NO.ModelPictureType
1BL0900CAA651S1P*C****User-added image1S1P 14650 CELL with PCM and wire
2BL0900CAA651S1PCBT***User-added image1S1P cell with BUTTON TOP AND PCM
3BL0900CAA651S1P*S****User-added image1S1P cell with PCM plus solder tab
    
4BL0900CAA651S1P*P****User-added image1S1P cell with PCM and enclosure
6BL0900CAA651S1P*WN***User-added image1S1P cell with PCM plus added 2 welded pads insulated
Rating Table
Model Number (Final ordering #/Part No to be defined)Voltage (V)Current (A)Power (W)RFQ
Safe transport for BL0900CAA651S1PCBT (pending)*Safe transport for BL0900CAA651S1PCBT Part III, Subsection 38.3 (pending) Drop test 1.2m in any orientation Package marked according to special provision 188 (pending)
Safe transport for BL0900CAA651S1PCBT2PC*Part III, Subsection 38.3 Drop test 1.2m in any orientation Package marked according to special provision 188
MET LABS NRTL UL/CSA 62133-2:2020 for BL0900CAA651S1P******MET LABS NRTL UL/CSA 62133-2:2020 for BL0900CAA651S1P******
BL0900CAA651S1P*3.70.93.24
IEC 62133-2:2017, IEC 62133-2:2017/AMD1:2021 (IEC62133-2) for BL0900CAA651S1PCBT*IEC 62133-2:2017, IEC 62133-2:2017/AMD1:2021 (IEC62133-2) for BL0900CAA651S1PCBT
IEC 62133-2:2017, IEC 62133-2:2017/AMD1:2021 BL0950CAA652S1PFCT pending*IEC 62133-2:2017, IEC 62133-2:2017/AMD1:2021 (IEC62133-2) for BL0950CAA652S1PFCT pending
BL0900CAA651S1PCBT2PC*null
* (Final ordering #/Part No to be defined)
Specifications
GENERAL SPECIFICATION: 
BATTERY WITH SAFETY CIRCUIT AND PLASTIC HOUSING
CELL: IMR14650BP095
PCM:GLOBTEK STANDARD
NTC: N/A
ID: N/A
CONFIGURATION: 1S1P
WEIGHT: TBD
2.ELECTRICAL SPECIFICATION FOR PACK: 
RATED CAPACITY: 900 mAh MIN, 950mAh TYPICAL
NOMINAL VOLTAGE: 3.7V
WATT-HOUR RATING: 3.33Wh
CHARGING METHOD: CONSTANT CURRENT + CONSTANT VOLTAGE
MAX. CHARGE VOLTAGE [V]: 4.2V
CHARGE CURRENT: 0.5C (standard); 1.0C (maximum)
RECOMMENDED CHARGE CUT OFF:BY CURRENT 95mA or 3hours charge terminate
MAX. CONTINUOUS DISCHARGE CURRENT: 3A (6A peak load for 500us) 
RECOMMENDED DISCHARGE CUT OFF: 2.7V
INTERNAL IMPEDANCE: ≤120 mΩ
EXP. CYCLE LIFE:>500 CYCLES > 70% OF INITIAL CAP. (0,5C/0,5C)
CELL PROTECTION: 
OVER CHARGE DETECTION:4.425 ±0.02V
 (1.25 SEC. DELAY, RESUME 4.325 ±0.02V)
OVER DISCHARGE DETECTION: 2.70±0.05V
 (20msec. DELAY, RESUME 2.8±0.05V REMOVE LOAD & CHARGING CURRENT)
OVER CURRENT DETECTION: 3.5A to 7A (8msec. DELAY) SHORT CURRENT DETECTION: 300us DELAY
PRECONDITIONED AT THE FACTORY

3. AMBIENT CONDITIONS
YES
TEMPERATURE RANGE: 
CHARGE: 0 TO +45°C
DISCHARGE:-20 TO +60°C
CHARGE RETENTION/STORAGE [%]:1 YEAR AT -20 TO +20°C >80%
 3 MONTHS AT -20 TO +40°C >80%
 1 MONTH AT 10 To +50°C >80%
HUMIDITY:60 ±25%RH
4.ENVIORMENTAL AND SAFETY 
Please review quarterly and follow HANDLING AND SAFETY PRECAUTIONS FOR LiIon & LiPolymer.
5. CELL REGULATORY APPROVALS: 
UL:Design to meet UL1642
IEC 61960 Cell designation and marking:1IMR14/65
 6. BATTERY PACK APPROVALS: 
 RoHS: 
 CE Mark: 
 TRANSPORTATION: 
Derating Curve
Qty (ea.)/Carton240
Individual Box/Gift Box Size (mm)115*115*80
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)TBD
Gross Weight (kg)
Label Width (mm)null
Label Height (mm)null
Input Configuration
Description
Approvals

Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.

Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.

LogoDescription
User-added image
 
MET LABS NRTL UL/CSA 62133-2:2020 for BL0900CAA651S1P******

 
IEC 62133-2:2017, IEC 62133-2:2017/AMD1:2021 (IEC62133-2) for BL0900CAA651S1PCBT

No Logo Applicable

Safe transport for BL0900CAA651S1PCBT Part III, Subsection 38.3 (pending) Drop test 1.2m in any orientation Package marked according to special provision 188 (pending)

No Logo Applicable

Part III, Subsection 38.3 Drop test 1.2m in any orientation Package marked according to special provision 188

Guidelines and cautions, Safety Notes, and Safety Precautions published on GlobTek’s website

http://en.globtek.com/safety-cautions.php

The purchaser of GlobTek battery pack products (Customer) agrees that they are a "Sophisticated user" who understands battery technology and that it is their sole responsibility to determine suitability of the product described for their application and to take precautions for protection against any hazards attendant to the handling and use of the product. GlobTek products are only designed for professional use and integration by companies into their products and may not be used by consumers directly. GlobTek provides batteries and battery packs as a component of an end system.

The acceptance of GlobTek specifications, the information on this page and use of the product(s) described in this or other GlobTek documents indicate that the product was qualified for use (tested and/or sample waiver signed), and the acceptance and binding of the customer to GlobTek terms and conditions, which supersede all other agreements, terms and conditions http://www.globtek.com/about/terms-and-conditions

Lithium Ion batteries are inherently dangerous. Continuous usage or charging without allowing the battery to discharge is a hazard.

FIRE HAZARD: This like all Li-Ion battery packs must be regularly discharged and charged. it is not recommended to be kept on permanent fullcharge and in a full state of charge.

Request Info