GT-A620-D5801 Enclosed-Metal ICT/ITE Power Supply

Guidelines and cautions, Safety Notes, and Safety Precautions published on GlobTek’s website
Model NumberGT-A620-D5801
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for MedicalContact GlobTek for more information
UKCA-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declaration
RoHS/RoHS3 Declaration
Prop 65 Statement
REACH Declaration
Conflict Minerals Declaration
Model Parameters
TechnologyLi-Ion Battery Charger
Cell Rated Capacity (mAh)
Cell Nominal Voltage
Cell Geometry
Cell Length
Cell Width
Cell Height
Cell Diameter

User-added image

DC Output Connectors (P1-P2) & (P3-P4) Pin Assignment 
Main Output
(ALLTOP C24501-128H1-Y) 
VO1                                        P4
VO1 RTN                               P3

Auxiliary Output (ALLTOP C24501-128H1-Y)
VO2                                        P1
VO2 COM                              P2

User-added image
Suitable Battery TypesLead-acid

Rating Table
Model Number (Final ordering #/Part No to be defined)Voltage (V)Current (A)Power (W)RFQ
* (Final ordering #/Part No to be defined)
Input Specifications

Input Voltage: 90-264Vac (See de-rating chart)
Frequency: 47-63Hz
Inrush current: 21A (peak @ 230Vac)
Input curren: 5.9A typ. @ 115Vac / 3A typ. @ 230Vac
No-Load Powe: 12.7 Watt @ 115Vac / 230Vac
Efficiency: 92% typ. @ full load @ 230Vac
Power Factor: 0.98 typ. (meets EN61000-3-2)
Conducted EMI: CISPR EN55022B
Harmonic distortion: Meets IEC 61000-3-2
Isolation:Meets IEC 60950-1
Leakage current 0.93mA typ. @ 230Vac
Hold-up Time: typ. 8.4mS @ 115Vac / 9.2mS @ 230Vac
Remote ON/OFF: Available (Contact Globtek)
Power fail Signal: Available (Contact Globtek)
Thermal Protection: NTC/thermostat and Temperature sensor

Output Specifications

Number of Outputs: Two (VO1) & (VO2)
Normal Output Voltage: VO1 – +58V (VO2 – +12V) VO1 is adjustable (Contact Globtek)
Normal Output Current: VO1 – 9.6A (VO2 – 5.0A)
Total Output Powerv: 620 Watts
Line Regulation: typ. ± 1%
Load Regulation: typ. VO1 & VO2 ± 2%
Transient Response: Peak > 2500mV and recovers within 3mS after 25% load step
Noise & Ripple: typ. 1% pk-pk – bandwidth limited to 20MHz
Over Voltage Protection: (OVP) Built In
Over Current Protection: (OCP) Programmable constant current (Contact Globtek)
Over Load Protection: (OLP) fully protected
Switching Frequency: 120KHz
DC-OK Signal: Available (Contact Globtek)
Environmental Specification

Storage Temperature: -40°C to +85°C
Operating Temperature: -20°C to +70°C (See de-rating chart)
Coolingv Internal fan with intelligent speed control

Safety @ Regulatory

IEC: 60950-1 / EN 60335-1 / EN60335-2-29 Class 1
Conducted EMI: CISPR EN55022B
Harmonic distortion: Meets IEC 61000-3-2

Mechanical Specifications
Type: Enclosed Metal
Weight: 2.74lb (1.24kgs)
Dimensions: Length; 260± 0.5mm [10.24 ±0.02”] Width; 82 ±0.5mm [3.23±0.02”] Height; 40.0mm [1.574”]
Derating CurveUser-added image

Qty (ea.)/Carton
Individual Box/Gift Box Size (mm)
Individual Box/Gift Box Color
Master Carton Size (mm)TBD
Gross Weight (kg)
Label Width (mm)
Label Height (mm)
Input Configuration
DescriptionIEC 60320/C14 AC Inlet Connector, Class I, Earth GroundUser-added image
Mates with IEC 60320/C13 Plug

Optional Locking IEC60320 Receptable and cord option available on some models by request.:
User-added image

Standard International IEC 320/C13 Cordsets

Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or packaged with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.


Stock Power Supply Cords

Part Number/ LinkCountryPlugTerminationLength (mm)(Ft)
3021457F701(R)N. American (Type B)NEMA 5-15PIEC 320/C1321507
1191068F0701(R)N. American (Type B)NEMA 5-15P HospitalIEC 320/C1324598
2194272M5701-T(R)Argentina (Type I)IRAM 2073IEC 320/C1325008
5502022M5701A(R)Australian (Type I)AS3112 / 3 PRONGIEC 320/C1325008
204B4272M5701(R)Brazil (Type N)BRAZILIEC 320/C1325008
6023602M5701(R)China (Type I)CCC GR2099IEC 320/C1325008
G8014272M5701(R)Danish (Type K)AFSNIT SECTION 107-2-D1IEC 320/C1325008
23144272M5701-T(R)Europe (Type E)CEE 7/7IEC 320/C1325008
23134272M5701EUKR(R)Europe/Korea Combo (Type E)CEE 7/7 / KSC8305IEC 320/C1325008
205IN4272M5701(R)India (Type D)India IS 1293 (also known as IA16A3 or BS546)IEC 320/C1325008
208IN4272M5701(R)India (Type M)India IS 1293 (also known as IA16A3 or BS546)IEC320/C1325008
377C4272M5701(R)Israel (Type H)ISL 377CIEC 320/C1325008
23024272M5701(R)Italy (Type L)CEI 23-16/VIIIEC 320/C1325008

[3 x 2.0mm2]
Japan (Type B)JIS 8303 / 3 PINSIEC 320/C1325008
302J115J6F0701J(R)North America / Japan (Type B – 12A)NEMA 5-15P (cULus approved), Japan JIS C 8303 (PSE Approved)IEC 320/C1318306
302J104J6F0701J(R)North America / Japan (Type B – 15A)NEMA 5-15P (cULus approved), Japan JIS C 8303 (PSE Approved)IEC 320/C1318306
302JT104J9F0701JT(R)North America / Japan / Taiwan (Type B – 15A)NEMA 5-15P (cULus approved), Japan JIS C 8303 (PSE Approved), Taiwan CNS 6797 (BSMI Approved)IEC 320/C1328009
2313K3432M5701(R)Korea (Type F)KS C 8305IEC 320/C1325008
5804272M5701(R)Russia (Type F)GOST 7396IEC 320/C1325008
2084272M5701(R)South Africa (Type M)South Africa SABS164-1 (16A type)IEC 320/C1325008
23214272M5701(R)Switzerland (Type J)SEV 1011IEC 320/C1325008
3003322M5701(R)Taiwan (Type B)BSMIIEC 320/C1325008
6363762M5701(R)Thailand (Type O)TIS 166-2549IEC 320/C1325008
PZ0800100-2M5BK13H(RUK, Hong Kong,Singapore, Gulf States (Type G)BS 1363AIEC 320/C1325008
7055002M5701A(R)InternationalIEC 320 C14-C13IEC 320/C1325008

Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.

Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.

User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
 User-added imageWEEE: Complies with EU 2012/19/EU ( Mark is on the label or Molded in the case
Popular Products (Stock items)
SKUVolts OutCurrent Out (Amps)ConnectorRFQSample Request
18430958.0, 12.09.6, 5.0

Guidelines and cautions, Safety Notes, and Safety Precautions published on GlobTek’s website

The purchaser of GlobTek battery pack products (Customer) agrees that they are a "Sophisticated user" who understands battery technology and that it is their sole responsibility to determine suitability of the product described for their application and to take precautions for protection against any hazards attendant to the handling and use of the product. GlobTek products are only designed for professional use and integration by companies into their products and may not be used by consumers directly. GlobTek provides batteries and battery packs as a component of an end system.

The acceptance of GlobTek specifications, the information on this page and use of the product(s) described in this or other GlobTek documents indicate that the product was qualified for use (tested and/or sample waiver signed), and the acceptance and binding of the customer to GlobTek terms and conditions, which supersede all other agreements, terms and conditions

Lithium Ion batteries are inherently dangerous. Continuous usage or charging without allowing the battery to discharge is a hazard.

FIRE HAZARD: This like all Li-Ion battery packs must be regularly discharged and charged. it is not recommended to be kept on permanent fullcharge and in a full state of charge.

Request Info