World map English (US)

POE Splitter, 12w, available in outputs of 5-24VDC, (IEEE802.3af PoE PD)

Request Information Download PDF
POE Splitter, 12w, available in outputs of 5-24VDC, (IEEE802.3af PoE PD)
GT-91080 Image
Model Image GT-91080, Af type PoE Splitter, Desktop/External, Power Over Ethernet Powered Device Converter (IEEE802.3af PoE PD) Power Supply AC Adaptor, , Input Rating: 36-60 VDC, , Output Rating: 12 Watts, Power rating with convection cooling (W) , 5-24V in 0.1V increments, Approvals:
Information
Model NumberGT-91080
DescriptionGT-91080, Af type PoE Splitter, Desktop/External, Power Over Ethernet Powered Device Converter (IEEE802.3af PoE PD) Power Supply AC Adaptor, , Input Rating: 36-60 VDC, , Output Rating: 12 Watts, Power rating with convection cooling (W) , 5-24V in 0.1V increments, Approvals:
Agency Documents
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttps://globtek.secure.force.com/models/ec_declaration?id=a0O30000007P7YqEAK
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for MedicalContact GlobTek for more information
UKCA-Declaration for Industrial/Commercial/ITEhttps://globtek.secure.force.com/models/ukca_declaration?id=a0O30000007P7YqEAK
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declarationhttps://globtek.secure.force.com/models/Morocco_SDoC_Declaration?id=a0O30000007P7YqEAK
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0O30000007P7YqEAK
REACH Declarationhttps://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttps://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeDesktop/External
TechnologyPower Over Ethernet Powered Device Converter (IEEE802.3af PoE PD) Power Supply AC Adaptor
CategoryAf type PoE Splitter
Input Voltage Range (V)36-60 VDC
Max Input Current (A)0.4
Max Output Power Rating (W)12
Output Voltage Range (V)5-24
Efficiency
Ingress Protection
Size (mm)85*76*36
Enclosure
Rating Table
Model Number (Final ordering #/Part No to be defined) VoltageAmps (A)Watts (W) RFQ
GT-91080-1005* 5210
GT-91080-1006* 6212
GT-91080-0812* 120.6667.99
GT-91080-1212* 12112
GT-91080-1215* 150.812
GT-91080-0818* 180.4447.99
GT-91080-1218* 180.66611.99
GT-91080-1220* 200.612
GT-91080-0824* 240.3337.99
GT-91080-1224* 240.512
* (Final ordering #/Part No to be defined)
Specifications 
A) ELECTRICAL SPECIFICATIONS:

01. DC Input Voltage: 36 – 60V
02. Output Regulation: +/- 5% measured at the output connector
03. Line Voltage Regulation: +/- 0.2% typical measured at the output connector
04. Output Ripple (Vp-p): 1% or 100mV max, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with a low impedance 47 uf electrolytic capacitor connected at the output
05. Switching Frequency: 100 KHz typical
06. Efficiency : 80% typ

B) PROTECTION
01. Under Voltage Lockout:  30Vdc
02. Short Circuit: Protected unit will auto recover upon removal of fault
03. Current Limiting: 110% to 175% of output rating
04. Thermal: Internally protected against over-temperature conditions

C) SAFETY & EMC
01. Isolation Voltage : 1000Vdc
02. Isolation Resistance :100M ohms (min)
03. Designed to UL/EN/IEC 60950-1
04. Meet FCC Class B standard
05. Meet EN55022 Class B standard

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: -15°C to 60°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -40°C to 85°C
05. Cooling: Free air cooling
06. Interoperability:  Complies with IEEE 802.3 AF,  tested by UNH-ioL
07. Input Set Classification Resistance : 24.9K ohms
08. Ethernet Communications Data Rates: 10/100 BaseT
E) ENCLOSURE
01. SIZE : 85*76*36 (L*W*H)m/m
02. Weight: 110g
03. Markings: Label and/or Pad Printed and/or Molded in the case

F) OPTIONS
01. Tighter output voltage regulation, +/- 2% or +/-3%
02. Reduced Vp-p Output Ripple
03. Custom Output Voltage, in 0.1V increment
G) INTERCONNECTS
01. RJ45 Input Power:  Power received on either pairs 4-5/7-8 or 1-2/3-6.
02. RJ45 Input Communications: Received on standard pins 1-2/3-6 used for 10/100 BaseT Ethernet
03. RJ45 Output Communications:  Ethernet passed thru on pins 1-2/3-6
03. Output Cable: DC power delivered thru 300mm length 18 gauge UL1185 style cable to a standard 2.5 x 5.5 x 11mm DC Power Plug, Center Positive
Derating Curve
Qty (ea.)/Carton100
Individual Box/Gift Box Size (mm)125*90*40
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)500 x 450 x 240
Gross Weight (kg)13
Label Width (mm)
Label Height (mm)
Input Configuration
Description

Is level VI efficiency required for power over Ethernet?

According to the department of energy of the United States,  An EPS may be considered a Class A EPS if it connects to the end-use application using any type of electrical connection, cable, cord, or other wiring, including both removable and hard-wired connections. An Ethernet cable would meet these criteria, so an EPS that connects to the end-use product via an Ethernet cable would still be considered a Class A EPS and would be subject to the applicable energy conservation standards if it meets the other  five criteria of a Class A EPS. In general all power over ethernet power supply adapters meet all criteria and are required to be level VI efficiency.

Request Info