3.6V 3350mAh 1S1P 18650 Cylindrical Li-Ion Battery Pack with options for connectors, housings, contacts or solder tables, now IEC621333 certified, Model BL3500C1865001S1P****** (1INR19/66)

Name: 3.6V 3350mAh 1S1P 18650 Cylindrical Li-Ion Battery Pack with options for connectors, housings, contacts or solder tables, now IEC621333 certified, Model BL3500C1865001S1P****** (1INR19/66)
Creator: GlobTek

3.6V 3350mAh 1S1P 18650 Cylindrical Li-Ion Battery Pack with options for connectors, housings, contacts or solder tables, now IEC621333 certified

The BL3500C1865001S1P****** (1INR19/66) series is an addition to the growing family of GlobTek’s IEC 62133 Certified High-Capacity Battery Packs which includes a safety circuit as well as multiple mechanical and connector options. In most regions, end system standards require battery packs to be certified to IEC 62133-2:2017. IEC 62133-2:2017 specifies requirements and tests for the safe operation of portable sealed secondary lithium cells and batteries containing non-acid electrolyte, under intended use and reasonably foreseeable misuse. This first edition cancels and replaces the second edition of IEC 62133 published in 2012.

The BL3500C1865001S1P****** (1INR19/66) series is a versatile family of Lithium Ion (Li-Ion) battery packs, featuring a 3350mAh single 18650 type cylindrical battery cell with a protection circuit as well as an optional PTC. This 1S1P battery pack may be packaged in multiple configurations such as Shrink-wrapped with wires and any connector required, Shrink-wrapped with solder tabs, Shrink-wrapped with pins for PCB/printed circuit board mounting, Button top (consumer type), and enclosed in custom specific plastic housings. A variation of the family will be released with onboard fuel guage.

The BL3500C1865001S1P****** (1INR19/66) series is IEC62133 certified and includes a number of standard items available from stock or customized solutions with low minimum order quantities.

GlobTek’s ability to match our custom battery packs to a custom battery charger designed for each specific application also keeps our customers a step ahead of the competition. We design and optimize both battery pack and battery charger during the design phase to provide the best possible performance.

Battery packs can be assembled from cells made by internationally recognized brands or from lower cost, lesser known Chinese manufacturers based on customer requirements and application demands. Common Standard and Optional Features for Other GlobTek’s Battery Packs Include:

High operating voltage
Curved / Flexible
Similar in all other ways to standard lithium polymer cells
High energy density
Customizable connection & housing
Customizable monitoring (fuel gauge, LED, etc).
Customizable protection / safety circuitry
Constant Current (CC) and / or Constant Voltage (CV) Charging Method
Overcharge / Overdischarge Detection and Cut-off
Overcurrent Detection
Multitude of Latest Chemistries

GlobTek Wall plug in AC Adapters are commonly used as power sources for intelligent battery charging solutions. Charging, monitoring and protection circuitry is optimized to work with GlobTek’s extensive family of multi-chemistry chargers, but can be modified to customers’ requirements. Constant Current output is available upon request.

Multitude of charging cradles and bays are available or can be designed to clients’ specifications.

The battery pack can be supplied with customer designated output connectors, many of which are stocked at GlobTek New Jersey USA, Münster Germany, and Suzhou China locations Made in USA or Made in China options available. Local China to China delivery is available upon request.

When designing in battery packs in end systems, please always consider Guidelines and cautions, Safety Notes, and Safety Precautions published on GlobTek’s website.

3.6V 3350mAh 1S1P 18650 Cylindrical Li-Ion Battery Pack with options for connectors, housings, contacts or solder tables, now IEC621333 certified, Model BL3500C1865001S1P****** (1INR19/66) — Image

High operating voltage
Curved / Flexible
Similar in all other ways to standard lithium polymer cells
High energy density
Customizable connection & housing
Customizable monitoring (fuel gauge, LED, etc).
Customizable protection / safety circuitry
Constant Current (CC) and / or Constant Voltage (CV) Charging Method
Overcharge / Overdischarge Detection and Cut-off
Overcurrent Detection
Multitude of Latest Chemistries

Multitude of charging cradles and bays are available or can be designed to clients’ specifications.

Request Information Download PDF

BL3500C1865001S1P****** (1INR19/66)

BL3500C1865001S1P****** (1INR19/66), , Battery Cylindrical Can, Battery Li-On, , Input Rating: , , Output Rating: Watts, Power rating with convection cooling (W) , V in 0.1V increments, Approvals: Safe transport; UN38.3; BL3500C1865001S1P****** (1INR19/66), , Battery Cylindrical Can, Battery Li-On, , Input Rating: , , Output Rating: Watts, Power rating with convection cooling (W) , V in 0.1V increments, Approvals: Safe transport; UN38.3;

Information

Guidelines and cautions, Safety Notes, and Safety Precautions published on GlobTek’s website

Model Number

BL3500C1865001S1P****** (1INR19/66)

Agency Documents

http://www.globtek.info/certs/BL3500C1865001S1PCMK/

CE EC-Declaration for Medical

Contact GlobTek for more information

CE EC-Declaration for Industrial/Commercial/ITE

Contact GlobTek for more information

CE EC-Declaration for Household

Contact GlobTek for more information

UKCA-Declaration for Medical

Contact GlobTek for more information

UKCA-Declaration for Industrial/Commercial/ITE

Contact GlobTek for more information

UKCA-Declaration for Household

Contact GlobTek for more information

Morocco SDoC Declaration

https://globtek.secure.force.com/models/Morocco_SDoC_Declaration?id=a0O3a00000MnSxJEAV

RoHS/RoHS3 Declaration

https://www.globtek.com/pdf/rohs_cert/a0O3a00000MnSxJEAV

Prop 65 Statement

https://en.globtek.com/prop-65-statement.pdf

REACH Declaration

https://www.globtek.com/pdf/iso_certificates/REACH.pdf

Conflict Minerals Declaration

https://www.globtek.com/pdf/conflict-minerals.pdf

Model Parameters

Type

Battery Cylindrical Can

Technology

Battery Li-On

Chemistry

Li-Ion

Cell Rated Capacity (mAh)

3350

Cell Nominal Voltage

3.6

Cell Geometry

Cylindrical

Cell Length

Cell Width

Cell Height

Cell Diameter

Enclosure

Model	Image	Mechanical Drawing	Type
BL3500C1865001S1PCMK			1S1P 18650 CELL + WIRES + MOLEX CONNECTOR
BL3500C1865001S1PCMK***			1S1P 18650 CELL + Button top and contact
BL3500C1865001S1PS***			1S1P 18650 CELL + Solder tab
BL3500C1865001S1PC***			1S1P 18650 CELL + WIRES AND CUSTOMER SPECIFIC CONNECTOR
BL3500C1865001S1PP***			1S1P 18650 CELL + Plastic enclosure (may be customized)
BL3500C1865001S1PWN**			1S1P 18650 CELL + 2 welded insulated tabs

Rating Table

Model Number (Final ordering #/Part No to be defined)	Voltage (V)	Current (A)	Power (W)	RFQ
BL3500C1865001S1P*	3.6	3.35	12.06
1INR19/73*

* (Final ordering #/Part No to be defined)

Specifications

General Pack Specifications

Description:	Lithium-ion battery pack with SMBus-compatible battery management system (BMS)
Includes Built-In Charger?	No
Includes Safety Protections?	Yes
Includes Fuel Gauge?	Yes, via SMBus
BMS Details:	ICs: SH366002 + HY2113 + HY2115 PCB: 500-12011920(R)
Cell configurations for which this electrical specification applies:	1s1p, 1s2p, 1s3p, 1s4p
Definitions of nomenclature:	The abbreviation (# 'p') is the "# of parallel strings" (i.e. the "Y" in XsYp) The abbreviation (# 's') is the "# of series cells in each string" (i.e. the "X" in XsYp)

Cell Specifications

Cell P/N:	LR2170SD
Nominal cell capacity:	5000mAh [Per cell manufacturer spec, 4.2V - 2.5V discharge, 0.2C, +25°C]
Initial internal impedance:	30mΩ (max.)
Cell approvals:	UL1642

Charge Specifications

Compatible Charging Method:

Constant current (CC) + constant-voltage (CV)

SMBus Smart Charger Compatible (SBS)?

Yes, pack suggests charging parameters based on measured pack temperature and SoC (SBS compatible chargers only)

CC Current:

	1s1p	1s2p	1s3p	1s4p
0°C to +10°C	0.375A	0.75A	1.125A	1.50A
+10°C to +45°C	1.00A	2.00A	3.00A	4.00A

[Maximum recommend values & SMBus ChargingCurrent() defaults]

CV Voltage:

4.125V

[Maximum recommended value & SMBus ChargingVoltage() default]

Pre-Charge Current:

When charging, if any cell's voltage is <2.70V, the charger should supply 0.075C [0.375A • (# 'p')] or less, until all cells are ≥2.70V

1s1p	1s2p	1s3p	1s4p
0.375A	0.75A	1.125A	1.50A

[Maximum recommend values & SMBus ChargingCurrent() defaults]

Charge-Termination Current:

0.05C [0.250A • (# 'p')]

Discharge Specifications

Maximum Continuous Discharge Current:	5.0A
Usable Discharge Capacity (typ.):	4500mAh • (# 'p') [4.125 - 2.8V discharge @ 0.2C]
Cycle Life (typ.):	750 cycles [≥ 70% of 1st cycle capacity, [4.125 - 2.8V, 0.2C charge / 0.2C discharge, +25°C]

Environmental

Ambient Temperature Range (in Charge):	0°C to +45°C
Ambient Temperature Range (in Discharge):	-20°C to +45°C
Humidity:	0 - 85% RH
Atmospheric Pressure:	86 - 106kPa
Storage:	Maintain SoC between 30 - 50% -20°C to +50°C 0 - 70% RH Suggested maintenance charge intervals: Every 3 months at -20°C to 25°C Every 1 month at -20°C to 50°C
Handling:	Please follow GlobTek, Inc. HANDLING AND SAFETY PRECAUTIONS FOR Li-Ion & Li-Polymer.

Recoverable Protection Parameters

Over-Voltage in Charge:

Trip: 4.25V ± 0.05V (any cell)
Release: 4.05V ± 0.05V (any cell)
Trip delay: 1s (typ.)

Under-Voltage in Discharge:

Trip: 2.80V ± 0.05V (any cell)
Release: 2.80V ± 0.05V (any cell)
Trip delay: 120ms (typ.)

Over-Current in Charge:

Delay	Trip threshold
Delay	1s1p	1s2p	1s3p	1s4p
8ms(typ.)	3.5A (min.) 5.0A (max.)	3.5A (min.) 5.0A (max.)	3.5A (min.) 5.0A (max.)	4.2A (min.) 6.0A (max.)

Over-Current in Pre-Charge (typ.)

N/A

Over-Current in Discharge:

Delay	Trip threshold
Delay	1s1p	1s2p	1s3p	1s4p
8ms(typ.)	5.2A (min.) 7.0A (max.)	5.2A (min.) 7.0A (max.)	5.2A (min.) 7.0A (max.)	6.0A (min.) 8.0A (max.)

Over-Temperature in Charge (typ.):

N/A

Under-Temperature in Charge (typ.):

N/A

Over-Temperature in Discharge (typ.):

N/A

Under-Temperature in Discharge (typ.):

N/A

Non-Recoverable (Permanent Fail) Protection Parameters

Method of deactivation:	N/A
Permanent Over-Voltage in Charge:	N/A
Permanent Over-Voltage in Charge (Standalone backup IC):	N/A
Permanent Under-Voltage in Discharge (typ.):	N/A
Permanent Over-Current in Charge (typ.):	N/A
Permanent Over-Current in Discharge (typ.):	N/A
Permanent Cell Over-Temperature (typ.):	N/A

Approvals & Regulatory

RoHS:	Complies with 2011/65/EU + (EU)2015/863 and China SJ/T 11364-2014
CE:	Complies with 2013/56/EU, including, but not limited to, EN61000-6-1:2007, EN61000-6-3:2007
Transportation:	Approved to UN38.3
Safety:	Designed to meet UL2054, IEC62133-2 (ed1.1)

Derating Curve

Qty (ea.)/Carton

Individual Box/Gift Box Size (mm)

Individual Box/Gift Box Color

White

Master Carton Size (mm)

TBD

Gross Weight (kg)

Label Width (mm)

Label Height (mm)

Input Configuration

Description

Approvals

Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.

Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.

Logo	Description
No Logo Applicable	Safe transport for BL3500C1865001S1PCMK Part III, Subsection 38.3 Drop test 1.2m in any orientation Package marked according to special provision 188
No Logo Applicable	Safe transport for BL3500C1865001S1PCMK Part III, Subsection 38.3 Drop test 1.2m in any orientation Package marked according to special provision 188

Guidelines and cautions, Safety Notes, and Safety Precautions published on GlobTek’s website

http://en.globtek.com/safety-cautions.php

The purchaser of GlobTek battery pack products (Customer) agrees that they are a "Sophisticated user" who understands battery technology and that it is their sole responsibility to determine suitability of the product described for their application and to take precautions for protection against any hazards attendant to the handling and use of the product. GlobTek products are only designed for professional use and integration by companies into their products and may not be used by consumers directly. GlobTek provides batteries and battery packs as a component of an end system.

The acceptance of GlobTek specifications, the information on this page and use of the product(s) described in this or other GlobTek documents indicate that the product was qualified for use (tested and/or sample waiver signed), and the acceptance and binding of the customer to GlobTek terms and conditions, which supersede all other agreements, terms and conditions http://en.globtek.com/terms-and-conditions/

Lithium Ion batteries are inherently dangerous. Continuous usage or charging without allowing the battery to discharge is a hazard.

FIRE HAZARD: This like all Li-Ion battery packs must be regularly discharged and charged. it is not recommended to be kept on permanent fullcharge and in a full state of charge.