GT-96180-18VV-T3-SP Desktop/External ICT/ITE Power Supply Datasheet
|Description||GT-96180-18VV-T3-SP, ICT/ITE Power Supply, Desktop/External, Single Port Power Over Ethernet Midspan (IEEE802.3af PoE PSE), , Input Rating: 100-240V~, 50-60 Hz, IEC 60320/C14 AC Inlet Connector, Class I, Earth Ground, Output Rating: 18 Watts, Power rating with convection cooling (W) , 18-56V in 0.1V increments, Approvals: CB 60335; CB 62368; Patent US9838207B2; EAC; UKCA; ETL 62368; cETLus 62368-1; Morocco; S-Mark 62368; IRAM; WEEE; VCCI; Ukraine; RoHS; China RoHS; Level VI; CE; Class I; LPS 62368; PSE; ETL; S-Mark 60950; RCM; GT-96180-18VV-T3-SP, ICT/ITE Power Supply, Desktop/External, Single Port Power Over Ethernet Midspan (IEEE802.3af PoE PSE), , Input Rating: 100-240V~, 50-60 Hz, IEC 60320/C14 AC Inlet Connector, Class I, Earth Ground, Output Rating: 18 Watts, Power rating with convection cooling (W) , 18-56V in 0.1V increments, Approvals: CB 60335; CB 62368; Patent US9838207B2; EAC; UKCA; ETL 62368; cETLus 62368-1; Morocco; S-Mark 62368; IRAM; WEEE; VCCI; Ukraine; RoHS; China RoHS; Level VI; CE; Class I; LPS 62368; PSE; ETL; S-Mark 60950; RCM;|
|CE EC-Declaration for Medical||Contact GlobTek for more information|
|CE EC-Declaration for Industrial/Commercial/ITE||https://globtek.secure.force.com/models/ec_declaration?id=a0Oa000000FiJj3EAF|
|CE EC-Declaration for Household||Contact GlobTek for more information|
|UKCA-Declaration for Medical||Contact GlobTek for more information|
|UKCA-Declaration for Industrial/Commercial/ITE||https://globtek.secure.force.com/models/ukca_declaration?id=a0Oa000000FiJj3EAF|
|UKCA-Declaration for Household||Contact GlobTek for more information|
|Morocco SDoC Declaration||https://globtek.secure.force.com/models/Morocco_SDoC_Declaration?id=a0Oa000000FiJj3EAF|
|Prop 65 Statement||https://en.globtek.com/prop-65-statement.pdf|
|Conflict Minerals Declaration||https://www.globtek.com/pdf/conflict-minerals.pdf|
|Technology||Single Port Power Over Ethernet Midspan (IEEE802.3af PoE PSE)|
|Category||ICT/ITE Power Supply|
|Input Voltage Range (V)||100-240V~, 50-60 Hz|
|Max Input Current (A)||0.6A|
|Max Output Power Rating (W)||18|
|Output Voltage Range (V)||18-56|
|Efficiency||USA DOE Level VI / Eco-design Directive 2009/125/EC, (EU) 2019/1782|
|3D File Download||https://www.globtek.com/dl/GT-96180-1856-T3-AP.stp|
* (Final ordering #/Part No to be defined)
GlobTek’s GT-96180-1856 Active Power over Ethernet Midspan Injector offers a cost effective and reliable solution for remote powering of wireless LAN Access Points, voice over IP (VoIP) phones, security cameras, RFID readers and other IP terminals up to 18W, using existing network infrastructure. This injector is configured to provide 18W of power per port over two pairs (Mode B) in compliance with IEEE 802.3af standard.
The GT-96180-1856 Active PoE Injector is designed to function with and provide power to any IEEE 802.3af compliant PoE device.
- Withstands high energy EMI immunity events without going into latched shutdown state
- Enhanced 18W output power capability
- IEEE 802.3af detection, disconnect and overload protection
- LED user interface for “power good” and fault conditions
- Compliant to PoE+, 10/100/1000 Base-T data rates
- Universal input power from 100VAC to 240VAC
- Unique patented green design: Compliant to DoE Efficiency level VI requirement
- Full protection for over-voltage and over-current
- Compact 104 x 54 x 40 mm (w/o mounting flange)
- VoIP Phones
- VoIP Phone with Video
- Wireless Access Points
- Bluetooth Access Points
- Multi-Band Wireless Access Points
- Network Security Cameras
- Point of Sales
- Industrial Controllers
- Electronic Time Card Readers
- Building Security Systems
- Network Camera with Pan, Tilt and Zoom Features
- Electronic Signs
- RFID Readers
- Motion Sensors
- HVAC Controllers
- Magnetic Card Readers
- Digital Time clock
A) ELECTRICAL SPECIFICATIONS
Input Voltage: 90-264 VAC (85-264VAC @ 85% of rated output power)
Input Line Frequency: 47-63Hz
Input Current: <0.6A RMS @ 90VAC, @ full load
Inrush Current: 60A (typ.), cold start @ 25°C at 230VAC
No load Power: <100mW
Efficiency: >85% (typ.), 4-point average efficiency, @ full load/230 VAC
Turn on-delay: 1 second typical @ 115VAC
Input Line Protection: MOV transient protected
Hold-up time: 8ms typical at nominal input voltage and full load
Leakage current: <100µA
Isolation: 3000 VAC
Number of Ports: 1
Data Rates: Compliant to PoE+, 10/100/1000 Mbits/second Ethernet speed
Power Injection Method:
IEEE 802.3af “Midspan” Mode B, using pins 4 & 5 (DC+) and 7 & 8 (DC-)
Mode A configuration, using pins 1 & 2 and 3 & 6 available upon special request
Please read our article Power over Ethernet (PoE) Mode A vs. Mode B for more information.
Port Voltage: 56VDC (nom.), measured between pins 4 & 5 and 7 & 8
Port Current: 0 to 320mA (max.)
Port Power: 18W (max.)
Port Voltage Regulation: Complies with IEEE 802.3af requirements
Port Voltage Ripple: Complies with IEEE 802.3af requirements
Port Voltage Transient Performance: Complies with IEEE 802.3af requirements
Port Overload Protection: Complies with IEEE 802.3af Requirements. Port will shut down during overload and auto recover when overload is removed.
Port Short Circuit Protection: Complies with IEEE 802.3af Requirements. Port will shut down during short circuit and auto recover when short is removed.
Port Power Disconnection Method: Automatic disconnect if < 10mA minimum load detected per IEEE 802.3af standard.
Green LED status indicator with four possible states:
1. No light: No powered device detected at end of Ethernet cable
2. Flashing at 1.5Hz: Detection (hand-shaking) in-process with Powered Device (PD)
3. Continuous light: Good connection with Powered Device (PD)
4. Flashing at 10Hz: Over current condition
Temperature (Operating): -10°C to 40°C
Temperature (Storage): -30°C to 80°C
Humidity: 0% to 95% relative humidity, non-condensing
Altitude: Operating, up to 5000m
C) MECHANICAL / ENCLOSURE
Housing: High impact plastic, 94V-0 polycarbonate, non-vented
Markings: Label, pad printed, and/or laser-etched onto the case
Dimensions: 104x54x40mm (w/o mounting flange)
Weight: 0.35lb (159g)
AC Input Mechanical Options:
Desktop with C6, C8, C14 or C18 IEC Inlet.
Hybrid housing (Desktop or inter-changeable blade wall plug-in), Class I or Class II input
Data and Data+Power Connector: Fully Shielded RJ45
D) EMISSIONS AND IMMUNITY
Emissions: Complies with FCC Class B Part 15, EN55022 Class B
Immunity: Complies with the following;:
EN610000-6-2 (Industrial Level Immunity Compliance, extended levels shown in parenthesis)
EN 61000-4-2 ESD (+/-18KV Air, +/-8KV Contact, criteria A) (+/-20KV Air, +/-10KV Contact, criteria B)
EN 61000-4-3 Radiated Immunity
EN 61000-4-4 EFT (+/-2.5KV, criteria A) (+/-4KV, criteria B)
EN 61000-4-5 Surge (+/-2KV Line-Line, +/-4KV Line to Gnd, criteria A)
EN 61000-4-6 Conducted Susceptibility
EN 61000-4-11 Voltage Dips and Interrupts
EN 61000-3-2 Harmonics, Class A
Compliant Safety Standards: See listings at end of this drawing for specifics
IEEE 802.3af: Product tested per the requirements of IEEE 802.3af
INTEROPERABILITY: Product's interoperability performance verified with various third
party PoE enabled systems. See table below.
1. Custom markings
2. Reduced output power rating
3. High reliability PCB laminate with plated through holes for IPC610 Class 2 compliance
4. Special housing colors
5. 48V to 54V output voltage, contact GlobTek for availability
|Individual Box/Gift Box Size (mm)||Egg Crate|
|Individual Box/Gift Box Color||White|
|Master Carton Size (mm)||410 x 450 x 195|
|Gross Weight (kg)|
|Label Width (mm)||40|
|Label Height (mm)||80|
|Description||IEC 60320/C14 AC Inlet Connector, Class I, Earth Ground|
Mates with IEC 60320/C13 Plug
Optional Locking IEC60320 Receptable and cord option available on some models by request.:
Standard International IEC 320/C13 Cordsets
Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or packaged with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.
Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.
|Popular Products (Stock items)|
Is level VI efficiency required for power over Ethernet?
According to the department of energy of the United States, An EPS may be considered a Class A EPS if it connects to the end-use application using any type of electrical connection, cable, cord, or other wiring, including both removable and hard-wired connections. An Ethernet cable would meet these criteria, so an EPS that connects to the end-use product via an Ethernet cable would still be considered a Class A EPS and would be subject to the applicable energy conservation standards if it meets the other five criteria of a Class A EPS. In general all power over ethernet power supply adapters meet all criteria and are required to be level VI efficiency.
What is a IEC 62368-1:2018 power supply?
IEC 62368-1:2018 is applicable to the safety of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a rated voltage not exceeding 600 V. This is a product safety standard that classifies energy sources, prescribes safeguards against those energy sources, and provides guidance on the application of, and requirements for, those safeguards. The prescribed safeguards are intended to reduce the likelihood of pain, injury and, in the case of fire, property damage. An IEC 62368-1 rated AC to DC converter or power supply is a power supply that has been tested to and certified to comply with the said standard.
Did IEC 62368-1 power supplies replace IEC60950-1 power supplies?
On December 20, 2020 the safety standards that historically have applied to information technology equipment and audio video equipment, IEC 60065 and IEC 60950-1,transition to IEC 62368-1. In North America ETL and UL 60950-1 certifications will continue to stay valid and may continue to be used until further notice.
What is the difference between an IEC 62368-1 and a IEC 60950-1 power supply?
While the structure and contents of the standards are very different in general most products that previously complied with IEC 60950-1 comply with the latest standard IEC 62368-1 with little or no modification.
Will my IEC60950-1 power supply remain available?
GlobTek will continue to manufacture and supply IEC 60950-1 power supplies indefinitely until further notice.
What is Level VI Efficiency?
The numerals I to VI are an International Efficiency Marking Protocol which allows manufacturers to designate the efficiency performance of a product. This performance is based on the measurement of the operating energy efficiency and no-load power consumption of external power supplies or AC DC adapters tested at different load levels. The no-load power consumption refers to the amount of power that an external power supply draws even when the application is turned off or disconnected.
Is Level VI Efficiency required?
Level VI efficiency is mandated in certain countries and regions for certain products or certain applications.
What is the Eco-design Directive 2009/125/EC?
The Eco-design directive put into law in Europe the latest requirements for energy efficiency and conservation for AC DC adapters and external power supplies.