GT-T104P500VVV-X.X-C Desktop/External ICT/ITE Power Supply Datasheet
|Description||GT-T104P500VVV-X.X-C, ICT/ITE Power Supply, Desktop/External, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz), Terminal Block, Output Rating: 500 Watts, Power rating with convection cooling (W) , 3-200V in 0.1V increments, Approvals: VCCI; Ukraine; RoHS; China RoHS; CE; WEEE;|
|CE EC-Declaration for Medical||Contact GlobTek for more information|
|CE EC-Declaration for Industrial/Commercial/ITE||https://globtek.secure.force.com/models/ec_declaration?id=a0Oa000000MmgGjEAJ|
|CE EC-Declaration for Household||Contact GlobTek for more information|
|UKCA-Declaration for Medical||Contact GlobTek for more information|
|UKCA-Declaration for Industrial/Commercial/ITE||https://globtek.secure.force.com/models/ukca_declaration?id=a0Oa000000MmgGjEAJ|
|UKCA-Declaration for Household||Contact GlobTek for more information|
|Morocco SDoC Declaration||https://globtek.secure.force.com/models/Morocco_SDoC_Declaration?id=a0Oa000000MmgGjEAJ|
|Prop 65 Statement||https://en.globtek.com/prop-65-statement.pdf|
|Conflict Minerals Declaration||https://www.globtek.com/pdf/conflict-minerals.pdf|
|Technology||Regulated Switchmode AC-DC Power Supply AC Adaptor|
|Category||ICT/ITE Power Supply|
|Input Voltage Range (V)||90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz)|
|Max Input Current (A)||6A|
|Max Output Power Rating (W)||500|
|Output Voltage Range (V)||3-200|
|Size (mm)||190(L) x 106(W) x 50(H)mm|
* (Final ordering #/Part No to be defined)
Universal AC input / Full range
Programmable output Voltage (-10% + 10%)
Split rail & Series connection possible
Protection: OVP, OLP, Short protection
DC Voltage Range: 3-200VDC
Rated Power: 500W,
Ripple & Noise (Max.): up to 15V: 150mVp-p, Over 15V 1% mVp-p
Voltage Adj. Range: ±10.0% Typical
Line Regulation: ±1.0%
Load Regulation: ±1.0%
Hold Up Time (Typ.): 10ms / 230VAC at full load
Voltage Range: 100 ~ 240VAC, 127 ~ 380VDC
Frequency Range: 47 ~ 63Hz
Power Factor : 95% Min/110VAC
Efficiency (Typ.): up to 15V : 78%, 24V :80%, 48V : 82% above 110V :83%
Inrush Current (Typ.): 20A / 115VAC, 40A / 230VAC
Over Load: Automatic power limited
Over Voltage: Autorecovery
Working Temp.: -15 ~ +50°C (Refer to load de-rating curve)
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp. & Humidity: -20 ~ +85°C, 10 ~ 95% RH
Vibration: 2G, 10~500Hz, 3 axes
Cooling: Load and temperature control fan
Dimension (WxHxD): 190x50x106 mm
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.
3. Tolerance: includes setup time tolerance, line regulation and load regulation.
4. De-rating may apply in low input voltage. Please check the de-rating curve for more details.
5. In parallel connection only one unit will operate if the total output load is less than 5% of the rated power.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it
7. This test is done without enclosure.
|Individual Box/Gift Box Size (mm)||205*118*62|
|Individual Box/Gift Box Color||White|
|Master Carton Size (mm)||TBD|
|Gross Weight (kg)||N/A|
|Label Width (mm)||N/A|
|Label Height (mm)||N/A|
Common output connector options:|
Click to add to your request.
For a comprehensive list of options, click here
Contact GlobTek for your specific requirements or custom solutions.
|Popular Products (Stock items)|
Is level VI efficiency required for power over Ethernet?
According to the department of energy of the United States, An EPS may be considered a Class A EPS if it connects to the end-use application using any type of electrical connection, cable, cord, or other wiring, including both removable and hard-wired connections. An Ethernet cable would meet these criteria, so an EPS that connects to the end-use product via an Ethernet cable would still be considered a Class A EPS and would be subject to the applicable energy conservation standards if it meets the other five criteria of a Class A EPS. In general all power over ethernet power supply adapters meet all criteria and are required to be level VI efficiency.
How Does an AC-DC Adapter Work?
The AC to DC adapter or external power supply consists of a power supply which is enclosed in a housing similar to an AC plug, hence the term plug type, wall plug in, plug-in or plugtop power adapter. The power supply is plugged into the mains socket and the AC Voltage is then converted by the AC to DC adapter power supply into a DC voltage that is fed into the appliance via the output cable connection.