GT-T104P500VVV-X.X-C Desktop/External ICT/ITE Power Supply Datasheet
|Description||GT-T104P500VVV-X.X-C, ICT/ITE Power Supply, Desktop/External, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz), Terminal Block, Output Rating: 500 Watts, Power rating with convection cooling (W) , 3-200V in 0.1V increments, Approvals: VCCI; Ukraine; RoHS; China RoHS; CE; WEEE; GT-T104P500VVV-X.X-C, ICT/ITE Power Supply, Desktop/External, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz), Terminal Block, Output Rating: 500 Watts, Power rating with convection cooling (W) , 3-200V in 0.1V increments, Approvals: VCCI; Ukraine; RoHS; China RoHS; CE; WEEE;|
|CE EC-Declaration for Medical||Contact GlobTek for more information|
|CE EC-Declaration for Industrial/Commercial/ITE||https://globtek.secure.force.com/models/ec_declaration?id=a0Oa000000MmgGjEAJ|
|CE EC-Declaration for Household||Contact GlobTek for more information|
|UKCA-Declaration for Medical||Contact GlobTek for more information|
|UKCA-Declaration for Industrial/Commercial/ITE||https://globtek.secure.force.com/models/ukca_declaration?id=a0Oa000000MmgGjEAJ|
|UKCA-Declaration for Household||Contact GlobTek for more information|
|Morocco SDoC Declaration||https://globtek.secure.force.com/models/Morocco_SDoC_Declaration?id=a0Oa000000MmgGjEAJ|
|Prop 65 Statement||https://en.globtek.com/prop-65-statement.pdf|
|Conflict Minerals Declaration||https://www.globtek.com/pdf/conflict-minerals.pdf|
|Technology||Regulated Switchmode AC-DC Power Supply AC Adaptor|
|Category||ICT/ITE Power Supply|
|Input Voltage Range (V)||90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz)|
|Max Input Current (A)||6A|
|Max Output Power Rating (W)||500|
|Output Voltage Range (V)||3-200|
|Size (mm)||190(L) x 106(W) x 50(H)mm|
* (Final ordering #/Part No to be defined)
Universal AC input / Full range
Programmable output Voltage (-10% + 10%)
Split rail & Series connection possible
Protection: OVP, OLP, Short protection
DC Voltage Range: 3-200VDC
Rated Power: 500W,
Ripple & Noise (Max.): up to 15V: 150mVp-p, Over 15V 1% mVp-p
Voltage Adj. Range: ±10.0% Typical
Line Regulation: ±1.0%
Load Regulation: ±1.0%
Hold Up Time (Typ.): 10ms / 230VAC at full load
Voltage Range: 100 ~ 240VAC, 127 ~ 380VDC
Frequency Range: 47 ~ 63Hz
Power Factor : 95% Min/110VAC
Efficiency (Typ.): up to 15V : 78%, 24V :80%, 48V : 82% above 110V :83%
Inrush Current (Typ.): 20A / 115VAC, 40A / 230VAC
Over Load: Automatic power limited
Over Voltage: Autorecovery
Working Temp.: -15 ~ +50°C (Refer to load de-rating curve)
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp. & Humidity: -20 ~ +85°C, 10 ~ 95% RH
Vibration: 2G, 10~500Hz, 3 axes
Cooling: Load and temperature control fan
Dimension (WxHxD): 190x50x106 mm
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.
3. Tolerance: includes setup time tolerance, line regulation and load regulation.
4. De-rating may apply in low input voltage. Please check the de-rating curve for more details.
5. In parallel connection only one unit will operate if the total output load is less than 5% of the rated power.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it
7. This test is done without enclosure.
|Individual Box/Gift Box Size (mm)||205*118*62|
|Individual Box/Gift Box Color||White|
|Master Carton Size (mm)||TBD|
|Gross Weight (kg)||N/A|
|Label Width (mm)||N/A|
|Label Height (mm)||N/A|
|Common output connector options:|
Click to add to your request.
For a comprehensive list of options, click here
Contact GlobTek for your specific requirements or custom solutions.
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.
Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.
|Popular Products (Stock items)|
Is level VI efficiency required for power over Ethernet?
According to the department of energy of the United States, An EPS may be considered a Class A EPS if it connects to the end-use application using any type of electrical connection, cable, cord, or other wiring, including both removable and hard-wired connections. An Ethernet cable would meet these criteria, so an EPS that connects to the end-use product via an Ethernet cable would still be considered a Class A EPS and would be subject to the applicable energy conservation standards if it meets the other five criteria of a Class A EPS. In general all power over ethernet power supply adapters meet all criteria and are required to be level VI efficiency.
How Does an AC-DC Adapter Work?
The AC to DC adapter or external power supply consists of a power supply which is enclosed in a housing similar to an AC plug, hence the term plug type, wall plug in, plug-in or plugtop power adapter. The power supply is plugged into the mains socket and the AC Voltage is then converted by the AC to DC adapter power supply into a DC voltage that is fed into the appliance via the output cable connection.