GT-21096-WWVV-FW Open Frame/Internal ICT/ITE Power Supply Datasheet

GT-21096-WWVV-FW Image
Model ImageGT-21096-WWVV-FW, ICT/ITE Power Supply, Open Frame/Internal, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Molex 09-65-2038 3 Position Header Pin 1: Neutral, Pin 2: Removed, Pin 3: Line, Output Rating: 19 Watts, Power rating with convection cooling (W) , 3.3-48V in 0.1V increments, Approvals: UKCA; CB 62368 (pending); CB 62368 (pending); CB 60950; CE; Double Insulation; China RoHS; cRUus; RoHS; Designed to meet EN 60601-1; VCCI; WEEE; EAC; Ukraine; SIQ; GT-21096-WWVV-FW, ICT/ITE Power Supply, Open Frame/Internal, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Molex 09-65-2038 3 Position Header Pin 1: Neutral, Pin 2: Removed, Pin 3: Line, Output Rating: 19 Watts, Power rating with convection cooling (W) , 3.3-48V in 0.1V increments, Approvals: UKCA; CB 62368 (pending); CB 62368 (pending); CB 60950; CE; Double Insulation; China RoHS; cRUus; RoHS; Designed to meet EN 60601-1; VCCI; WEEE; EAC; Ukraine; SIQ;
Information
Model NumberGT-21096-WWVV-FW
DescriptionGT-21096-WWVV-FW, ICT/ITE Power Supply, Open Frame/Internal, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Molex 09-65-2038 3 Position Header Pin 1: Neutral, Pin 2: Removed, Pin 3: Line, Output Rating: 19 Watts, Power rating with convection cooling (W) , 3.3-48V in 0.1V increments, Approvals: UKCA; CB 62368 (pending); CB 62368 (pending); CB 60950; CE; Double Insulation; China RoHS; cRUus; RoHS; Designed to meet EN 60601-1; VCCI; WEEE; EAC; Ukraine; SIQ; GT-21096-WWVV-FW, ICT/ITE Power Supply, Open Frame/Internal, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Molex 09-65-2038 3 Position Header Pin 1: Neutral, Pin 2: Removed, Pin 3: Line, Output Rating: 19 Watts, Power rating with convection cooling (W) , 3.3-48V in 0.1V increments, Approvals: UKCA; CB 62368 (pending); CB 62368 (pending); CB 60950; CE; Double Insulation; China RoHS; cRUus; RoHS; Designed to meet EN 60601-1; VCCI; WEEE; EAC; Ukraine; SIQ;
Agency Documentshttp://www.globtek.info/certs/GT-21096/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttps://globtek.secure.force.com/models/ec_declaration?id=a0Oa000000KX0W0EAL
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for MedicalContact GlobTek for more information
UKCA-Declaration for Industrial/Commercial/ITEhttps://globtek.secure.force.com/models/ukca_declaration?id=a0Oa000000KX0W0EAL
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declarationhttps://globtek.secure.force.com/models/Morocco_SDoC_Declaration?id=a0Oa000000KX0W0EAL
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0Oa000000KX0W0EAL
Prop 65 Statementhttps://en.globtek.com/prop-65-statement.pdf
REACH Declarationhttps://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttps://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeOpen Frame/Internal
TechnologyRegulated Switchmode AC-DC Power Supply AC Adaptor
CategoryICT/ITE Power Supply
Input Voltage Range (V)100-240V~, 50-60 Hz
Max Input Current (A)0.5A Max
Max Output Power Rating (W)19
Output Voltage Range (V)3.3-48
EfficiencyN/A
Ingress Protection
Size (mm)
EnclosureUser-added image

IMPORTANT INSTALLATION NOTES:
FOR PROPER  INSULATION AND GROUNDING RELIABILITY, FOLLOW EITHER OPTIONS BELOW

 
OPTION 1: USE NYLON 4-40 SCREWS AND  NYLON STAND-OFF FOR ALL MOUNTING  HOLES  AND ADD JUMPER 
                    WIRE OPTION SHOWN BELOW FOR  EARTH CONNECTION BETWEEN MOUNTING HOLES 4  AND 3.

  User-added image          RING TERMINAL, AMP P/N: 8-34142-5 AWG 18 STRANDED WIRE,
                                       GREEN, 100 mm LENGTH
 
OPTION 2. USE METALLIC 4-40 SCREWS AND METALLIC STAND-OFF  FOR HOLES 3 AND 4 AND USE NYLON 4-40  
                   SCREWS AND NYLON STAND-OFF FOR HOLES 1 AND 2.   
                   OPTION 2 IS ONLY  APPLICABLE IF SYSTEM CHASSIS WHERE THE POWER SUPPLY IS MOUNTED IS MADE
                   OUT OF METAL.
 
Rating Table
Model Number (Final ordering #/Part No to be defined)VoltageAmps (A)Watts (W)RFQ
GT-21096-0903-FW*3.32.68.58
GT-21096-1305-X.X-FW*52.613
GT-21096-1506-X.X-FW*62.515
GT-21096-1509-1.5-FW*7.5215
GT-21096-1509-FW*91.715.3
GT-21096-1509-X.X-FW*91.715.3
GT-21096-1512-X.X-FW*121.2515
GT-21096-1815-X.X-FW*151.218
GT-21096-1818-X.X-FW*18118
GT-21096-1824-X.X-FW*240.7518
GT-21096-1524-X.X-FW*240.62515
GT-21096-1948-X.X-FW*480.419.2
* (Final ordering #/Part No to be defined)
Specifications
A) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector
04. Line Voltage Regulation: +/- 1% typical measured at full load
05. Output Ripple (Vp-p): +/- 1% of output voltage, Vp-p, typical
06. Turn-ON/OFF: 5% maximum,1 mS typical recovery time for 25% step load
07. Turn-ON Delay: 1 Sec, typical
08. Hold-Up Time: 8 mS typical @ nominal input voltage and full load
09. Inrush Current: 30A maximum cold start @ 115 Vac input, 60A maximum cold start @ 230 Vac input
10. Switching Frequency: 100 KHz typical, varies with line and load
11. Efficiency: 75% typical at nominal input and full load

B) PROTECTION
01. Over-Voltage: limited via crowbar method
02. Short Circuit/Over-load: momentary short circuit protected, output will autorecover upon removal of short
03. Input Protection: Input line

C) SAFETY
01. Dielectric Withstand Voltage: 4242 Vdc from primary to secondary
02. Earth Leakage Current: N/A for Class II units, there is no PE Ground pin, so Earth Leakage current is not measured
03. Earth continuity test:<0.1 Ohm or < 0.2 Ohm when with a non-detachable Power Supply cord, Class I Only
04. Touch Current: <0.25mA @ 240Vac input voltage
05. Type of protection against electric shock: class II
06. Degree of safety of application in the presence of flammable anesthetic: not evaluated
07. Mode of operation: Continuous
08. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006


D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 30°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection

E) ENCLOSURE
01. Housing: Open Frame
02. Size: 84.6 x 41.4 x 28.9 mm
Derating Curve
Qty (ea.)/Carton120
Individual Box/Gift Box Size (mm)95*65*35
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)450 x 410 x 195
Gross Weight (kg)21.1
Label Width (mm)25.4
Label Height (mm)17.8
Input Configuration
DescriptionMolex 09-65-2038 3 Position Header Pin 1: Neutral, Pin 2: Removed, Pin 3: LineDocument: http://www.molex.com/pdm_docs/sd/009652038_sd.pdf
Catalog Page: http://www.molex.com/molex/products/datasheet.jsp?part=active/0009652038_PCB_HEADERS.xml

User-added image
 

Mates With Part(s):

5195 SPOX™ Crimp Housing, 5239 KK® Crimp Housing
Optional Input Wiring Kits are available:

PN/Ordering No   Length  End A   End B
XHP410070M7MLX3(R)70JST XHP-4  Molex 09-93-0300
C810070M6MLX3(R)60IEC60320 C8  Molex 09-93-0300
C1410070M6MLX3(R)60IEC60320 C14  Molex 09-93-0300
Approvals

Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.

Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.

LogoDescription
User-added imageAttention Mark / Refer to operating manual for operating and service instructions
No Logo CB Certificate IEC 60950-1:2005 (2nd Edition), Am 1: 2009, CB report IEC 60950-1:2005 (2nd Edition), Am 1: 2009 and EN 60950-1:2006 + Am 1:2010 + Am 11:2009 + Am 12:2011

No Logo Applicable

CB for IEC 62368-1:2014 (Second Edition)

No Logo Applicable

CB for IEC 62368-1:2014 (Second Edition) (pending)

User-added image  
CE Certification
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
cRUus Registered E170507 CSA C22.2 No. 60950-1-03 1st Ed.
No LogoDesigned to meet EN 60601-1:2006 + A11:2011 +A1:2013 3rd Edition
User-added image
User-added image  Declaration ДС № ЕАЭС N RU Д-US.КА01.В.10453_19 Custom Union of Russia, Belarus and Kazakhstan http://www.globtek.com/redirect/?loc=gost-certificate-eac-declaration
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
RoHSSpecifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
User-added image
 
SIQ Mark EN 60950-1 :2006 +A 1 :2010 +A 11 :2009 +A 12:2011 + A2:2013
User-added image
 
UKCA Certification
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products (Stock items)
SKUVolts OutCurrent Out (Amps)ConnectorRFQSample Request
14420312.01.25
157991

What is an open frame or internal AC-DC Power supply?

Open frame AC-DC power supplies are also known as AC-DC converters and are a type of internal power supply. The open frame AC to DC power supply is built into the inside of a system and used to convert the AC current into DC voltage.

How Does an AC-DC Adapter Work?

The AC to DC adapter or external power supply consists of a power supply which is enclosed in a housing similar to an AC plug, hence the term plug type, wall plug in, plug-in or plugtop power adapter. The power supply is plugged into the mains socket and the AC Voltage is then converted by the AC to DC adapter power supply into a DC voltage that is fed into the appliance via the output cable connection.

Request Info
Call
Email
💬
Text
💁
Chat
?
Request a Quote
Can we help you?
Can we help you?