Request Information Download PDF Configure Output Connector
GT-21097CC GT-21097CC
Information
Model NumberGT-21097CC
DescriptionGT-21097CC, ITE Power Supply, Desktop/External, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, IEC 60320/C14 AC Inlet Connector, Class I, Earth Ground, Output Rating: 50 Watts, 3.3-48V in 0.1V increments, Approvals: FCC CB CE Class I China RoHS cULus GOST-R IP40 Korea (3V Only) Korea (5V Only) Korea (12V Only) LPS PSE RoHS 2 Singapore (5V only) Ukraine VCCI WEEE PSE PSE PSE PSE
Agency Documentshttp://www.globtek.info/certs/GT-21097/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0O30000007P7ZWEA0
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0O30000007P7ZWEA0
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeDesktop/External
TechnologyRegulated Switchmode AC-DC
CategoryITE Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)1.6A MAX
Wattage (W)50
Vout Range (V)3.3-48
Efficiency
Ingress ProtectionIndoor Use
Size (mm)
EnclosureUser-added image

Indicator color: Green when chaged
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-21097CC2003 RFQ
GT-21097CC3005-Y.Y RFQ
GT-21097CC4509-3.0 RFQ
GT-21097CC4509-Y.Y RFQ
GT-21097CC5012-Y.Y RFQ
GT-21097CC5015-Y.Y RFQ
GT-21097CC5018-Y.Y RFQ
GT-21097CC5048-Y.Y RFQ
GT-21097CC5048-12.0 RFQ
GT-21097CC5024-5.0 RFQ
GT-21097CC5024-Y.Y RFQ
GT-21097CC5048-15.0 301.6750.1 RFQ
GT-21097CC5048-18.0 301.6750.1 RFQ
GT-21097CC5048-15.0 331.21240 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output current range: 0 to XXA, constant current set to XXA
04. Output Regulation: +/- 5% measured at the output connector
05. Line Voltage Regulation: +/- 1% typical measured at full load
06. Output Ripple (Vp-p): +/- 1% of output voltage, Vp-p, typical
07. Turn-ON/OFF: 5% maximum,1 mS typical recovery time for 25% step load
08. Turn-ON Delay: 1 Sec, typical
09. Hold-Up Time: 10 mS typical @ nominal input voltage and full load
10. Inrush Current: 20A maximum cold start @ 240Vac input
11. Switching Frequency: 100 KHz typical, varies with line and load

B) PROTECTION
01. Over-Voltage: limited via crowbar method
02. Short Circuit: Hiccup with auto recovery upon removal of short
03. Over-load: Hiccup with auto recovery
04. Input Protection: Input line

C) SAFETY
01. Dielectric Withstand Voltage: 4242 Vdc from primary to secondary (for Class II with functional ground)
02. Touch Current: <0.25mA @ 240Vac input voltage
03. Earth Leakage Current: <3.5 mA at 240Vac input voltage
04. Earth continuity test:<0.1 Ohm or < 0.2 Ohm when with a non-detachable Power Supply cord, Class I Only
05. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006


D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 118 x 60 x 33 ± 0.5 mm
03. Markings: Label and/or Pad Printed and/or Molded in the case
04. Green LED for indicating Power Out
Derating CurveUser-added image
Qty (ea.)/Carton60
Individual Box/Gift Box Size (mm)147*100*33
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)455 x 405 x 220
Gross Weight (kg)19.6
Label Width (mm)44.5
Label Height (mm)79.5
Input Configuration
DescriptionIEC 60320/C14 AC Inlet Connector, Class I, Earth GroundUser-added image
Mates with IEC 60320/C13 Plug

Optional Locking IEC60320 Receptable and cord option available on some models by request.:
User-added image

Standard International IEC 320/C13 Cordsets

Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or packaged with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.

 

Stock Power Supply Cords

Part Number/ Link

Country

Plug

Termination

Length (mm)

(Ft)

3 Conductors (Grounded) IEC 320/C13

3021457F701(R)

N. American

NEMA 5-15P

IEC 320/C13

2150

7

1191068F0701(R)

N. American

NEMA 5-15P Hospital

IEC 320/C13

2459

8

2194272M5701-T(R)

Argentina

IRAM 2073

IEC 320/C13

2500

8

5502022M5701A(R)

Australian

AS3112 / 3 PRONG

IEC 320/C13

2500

8

204B4272M5701(R)

Brazil

BRAZILIAN; WS-002

IEC 320/C13

2500

8

6023602M5701(R)

China

CCC GR2099

IEC 320/C13

2500

8

G8014272M5701(R)

Danish

AFSNIT SECTION 107-2-D1

IEC 320/C13

2500

8

23144272M5701-T(R)

Europe

CEE 7/7

IEC 320/C13

2500

8

20842710M701(R)

India

India IS 1293 (also known as IA16A3 or BS546)

IEC 320/C13

2500

8

377C4272M5701(R)

Israel

ISL 377C

IEC 320/C13

2500

8

23024272M5701(R)

Italy

CEI 23-16/VII

IEC 320/C13

2500

8

3003339F701(R) [3x1.25mm2]

3003068F2701-HK(R) [3 x 2.0mm2]

Japan

JIS 8303 / 3 PINS

IEC 320/C13

2500

8

2313K3432M5701(R)

Korea

KS C 8305

IEC 320/C13

2500

8

23144272M5701-T(R) [Same as Europe Above]

Russia

GOST 7396

IEC 320/C13

2500

8

2084272M5701(R)

S. Africa

S. African

IEC 320/C13

2500

8

23214272M5701(R)

Switzerland

SEV 1011 ( EL 203)

IEC 320/C13

2500

8

3003322M5701(R)

Taiwan

BSMI

IEC 320/C13

2500

8

PZ0800100-2M5BK13H(R

UK

BS 1363A

IEC 320/C13

2500

8

7055002M5701A(R)

International

IEC 320 C14-C13

IEC 320/C13

2500

8

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added imageAttention Mark / Refer to operating manual for operating and service instructions
No Logo CB Certificate IEC 60950-1:2005 (2nd Edition), Am 1: 2009, CB report IEC 60950-1:2005 (2nd Edition), Am 1: 2009 and EN 60950-1:2006 + Am 1:2010 + Am 11:2009 + Am 12:2011
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
Class I Earth Ground
User-added image
UL60950-1, cULus to UL 60950-1, 2nd Edition, 2007-03-27 and CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03
User-added image
FCC PART 15 CLASS B
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP40Ingress Protection: IP40 to IEC60529:2001 Protection against granular foreign bodies
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50313285, to J60950-1(H26) , J55022(H22),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50314475, to J60950-1(H26) , J55022(H22),J3000(H25)[DC15≤30V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50314475, to J60950-1(H26) , J55022(H22),J3000(H25)[DC30≤60V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added image
Korea KET KC Mark GT-21097-2003 HU10499-10005A (3V Only)
User-added image
Korea KET KC Mark GT-21097-3005 HU10499-10005A (5V Only)
User-added image
Korea KET KC Mark GT-21097-5012 HU10040-7022B (12V Only)
LPSLimited Power Source
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50314475, to J60950-1(H26) , J55022(H22),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added image
Serial Number Information
User-added image
Singapore 092308-11 GT-21097-3005 To IEC 60950-1 5 volts only
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
187168301.67Strip & Tin 6 mm or Equal
201203331.51Molex 03-06-2023 2-position housing (no ears) with (2) Molex 02-06-2103 terminals

Request Info

Text us your inquiry