Request Information Download PDF Configure Output Connector
GT-41130-20VV-W2 GT-41130-20VV-W2
Information
Model NumberGT-41130-20VV-W2
DescriptionGT-41130-20VV-W2, ITE Power Supply, Wall Plug-in, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, NEMA 1-15P, North America Blades, Class II 2 Conductors, Output Rating: 24 Watts, 10-24V in 0.1V increments, Approvals: CB CE Double Insulation WEEE RoHS 2 Level V NrCAN PSE GOST-R Ukraine VCCI cULus IP41 Option LPS NEMKO PSE China RoHS
Agency Documentshttp://www.globtek.info/certs/GT-41130-W2/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0O30000008UmaxEAC
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0O30000008UmaxEAC
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC
CategoryITE Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.8A
Wattage (W)24
Vout Range (V)10-24
EfficiencyV
Ingress ProtectionIP41
Size (mm)50*81*31
EnclosureUser-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-41130-2016-11.0-W2 5315 RFQ
GT-41130-2016-6.0-W2 10220 RFQ
GT-41130-2016-4.0-W2 12224 RFQ
GT-41130-2016-2.2-W2 13.81.7323.87 RFQ
GT-41130-2016-1.0-W2 151.624 RFQ
GT-41130-2016-W2 161.524 RFQ
GT-41130-2024-6.0-W2 181.3323.94 RFQ
GT-41130-2424-W2 24124 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Ripple (Vp-p): +/-1% or 150 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
04. Turn-ON/OFF Overshoot: 5% maximum, 1 mS typical recovery time for 25% step load
05. Turn-ON Delay: 1 second, typical
06. Hold-Up Time: 8 mS typical at nominal input voltage and full load
07. Inrush Current: 30A typical at 115VAC input and 60A typical at 230VAC input
08. Switching Frequency: 65 KHz typical

B) PROTECTION
01. Over-Voltage: Protected Zener clamp across the output
02. Short Circuit: Protected unit will auto recover upon removal of fault
03. Input Protection: Input line fusing

C) SAFETY
01. Dielectric Withstand Voltage: 4242Vdc from primary to secondary
02. Touch Current: <0.25mA @ 240Vac input voltage

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 47.6*82.7*37.7mm +/-1.0 mm
03. Markings: Label and/or Pad Printed and/or Molded in the case
Derating Curve
Qty (ea.)/Carton80
Individual Box/Gift Box Size (mm)103*38*75
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)435 x 395 x 178
Gross Weight (kg)15.6
Label Width (mm)29.5
Label Height (mm)32.0
Input Configuration
DescriptionNEMA 1-15P, North America Blades, Class II 2 ConductorsAll NEMA 1 devices are two-wire non-grounding devices (hot-neutral) rated for 125 V maximum. NEMA 1-15P plugs have two parallel flat blades, 0.25 inches (6.35 mm) wide, 0.06 inches (1.524 mm) thick, 0.625-0.718 inches (15.875–18.256 mm) long, and spaced 0.5 inches (12.7 mm) apart.
Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
No Logo CB Certificate IEC 60950-1:2005 (2nd Edition), Am 1: 2009 + Am 2:2013
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added imageUL60950-1, cULus to UL 60950-1, 2nd Edition, 2007-03-27 and CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 5V and 12V only
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP41Ingress Protection: IP41 to IEC60529:2001 Protection against granular foreign bodies - Protected against vertically falling drops of water
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50313285, to J60950-1(H26) , J55022(H22),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
 User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
LPSLimited Power Source
User-added imageNEMKO EN60950-1:2006, A11, A1, A12, A2
User-added imageEEV1191Natural Resources Canada (NRCan): CSA Standard C381.1-08, QSP NRCAN EEV1191; http://shop.csa.ca/en/canada/energy-efficiency/cancsa-c3811-08/invt/27024802008
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
168186102Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
161990122Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
164161122Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
167228122.0Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
137467122.0Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
175685122Female Barrel Right Angle, 5.5*2.1*11mm with NO internal Spring Clip NOR Locking Notch or Equal
240710122.0Female Barrel 5.5 * 2.5 * 9.5mm with internal Spring Clip and Locking Notch or Equal
228965122.0Female Barrel 5.5*2.1*12mm w/ Spring Clip & Locking Notch or Equal
215836122Female Barrel 5.5*2.5*11mm, Right Angle with Spring Clip & Locking Notch or Equal
190139122Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
190094122Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
180396122Stripped 50 +/-5mm; Tinned 9.5 +/- 2mm or Equal
180368122Stripped 50 +/-5mm; Tinned 9.5 +/- 2mm or Equal
346126122Female Barrel, Right Angle 3.5 * 1.35 * 9.5mm with internal Spring Clip and Locking Notch or Equal
173248122.0RECPT 2POS HSNG WHITE 2.5mm JST PN: SYR-02TV; 2X Crimp 22-28 awg Pins JST PN: SYM-001T-P0.6(N) or Equivalent
18255513.81.73Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
18447215.8Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
173831151.6Micro-B USB 5 Pin Type "B" or Equal
161170151.6Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
173223151.6Micro-B USB 5 Pin Type "B" or Equal
171692151.6Micro-B USB 5 Pin Type "B" or Equal
171042151.6Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
19163053Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
19163253Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal

Request Info

Text us your inquiry