Request Information Download PDF
GTD93035H6013.2-F GTD93035H6013.2-F
Ruggedized DC/DC converter, 50-150VDC Input and 60W/13.2VDC output. Alternate output voltages available. IEC 60068 Vibration, Shock, Bump, and Salt Mist tested
Model NumberGTD93035H6013.2-F
DescriptionGTD93035H6013.2-F, ITE Power Supply, Enclosed-Metal, DC-DC, , Input Rating: 50-150 Vdc, 3 Positon Terminal Block, Output Rating: 60 Watts, 13.2V in 0.1V increments, Approvals: S-Mark CE FCC IP54 Salt Mist Vibration Shock Bump Saudi South African cETLus AS/NZS RCM SGS (Brazil) CU Kazakhstan CCC NOM South African Malaysia CB
Agency Documents
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITE
RoHS/RoHS3 Declaration
REACH Declaration
Conflict Minerals Declaration
Model Parameters
CategoryITE Power Supply
Input Voltage Range (V)50-150 Vdc
Max Input Current (A)2.0 A
Max Output Power Rating (W)60
Output Voltage Range (V)13.2
Ingress Protection
Size (mm)180*95*53

Rating Table
Model Number (Final ordering #/Part No to be defined) VoltageAmps (A)Watts (W) RFQ
GTD93035H6013.2-F* 13.24.559.4 RFQ
* (Final ordering #/Part No to be defined)
1. Input Voltage: 50-150 Vdc
2. Output Regulation: +/- 1% measured at the output connector
3. Line Voltage Regulation: +/- 1% typical measured at full load
4. Output Ripple (Vp-p): 132 mV maximum, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
5. Turn-ON/OFF Overshoot: 5% maximum, 500uS typical recovery time for 25% to 50% step load
6. Turn-ON Delay: 3 Seconds, maximum @ full load, nominal line
7. Hold-Up Time: 5mS typical @ nominal input voltage and full load
8. Inrush Current: 50A maximum cold start @ 50Vdc input
9. Switching Frequency: 150 KHz typical
10. Efficiency: >80% minimum at full load, nominal line
11. Transient Response: 200uS to +/-1.5% max value @ 25% load step

1. Over-Voltage: Protected latch type, input recycling required to recover
2. Short Circuit: Hiccup with auto recovery
3. Over-load: Hiccup with auto recovery
4. Input Protection: Input line and neutral fusing
5. Reverse Polarity Protection: Yes

1. Dielectric Withstand Voltage: 1600 Vdc from primary to secondary, primary to chassis, secondary to chassis

1. MTBF: 200,000 Hours @ 25°C ambient temperature
2. Operating Temperature: -30°C to 50°C ambient temperature
3. Humidity: 5% to 85% relative humidity
4. Storage Temperature: -40°C to 85°C
5. Cooling: Convection

1. Housing: Rugged, vehicle mounted. Vibration, shock, contamination, water resistant. Aluminum
2. Size: 189*95*53mm
3. Markings: Label
4. Vibration: IEC 60068-2-64 Fh (Random)
5. Bump: IEC 60068-2-29 Eb
6. Waterproof: Not required. However, it should be water-resistant. Recommended IEC 60068-2-52
7. Contamination: Resistant to chemicals, rust, etc.
Derating CurveUser-added image
Qty (ea.)/Carton12
Individual Box/Gift Box Size (mm)117*74*204
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)430 x 370 x 190
Gross Weight (kg)15.2
Label Width (mm)44.5
Label Height (mm)49.5
Input Configuration
Description3 Positon Terminal BlockShanghai Elinker P/N: LG103-5.0
No Logo ApplicableAS/NZS 60950.1:2011
No Logo CB Certificate IEC 60950-1:2005 2nd Edition + A1:2009 +A2:2013 Report to EN 60950-1:2006 +A11:2009 +A1:2010 + A12:2011 +A2:2013 For 5V-24V only
User-added image CCC to GB4943.1-2011 GB9254-2008 GB17625.1-2012 with Tropical and Altitude above 2000m approval
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added image

cETLus-Cert-60950-1 4007497 Listed
User-added image  
адаптер питания
CU Kazakhstan Certificate
User-added image
IP54Ingress Protection: IP54 to IEC60529:2001 Protected against dust - limited ingress (no harmful deposit) and Protected against sprays from all directions - limited ingress permitted
No Logo Malaysia ST Release Letter GTD93035L6013.2-F GTD93035H6013.2-F IEC60950-1:2005 (ED.2) + A1:2009 No logo
User-added image
Fuente de alimentación de ITE
NOM (Mexico) to NOM-001-SCFI-1993
User-added image
RCM N136; Australia and New Zealand Regulatory Compliance, Mark (
User-added imageS-Mark Certificate EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 +A2:2013 (
No LOGOSalt Mist to IEC 60068-2-52 Environmental testing Part 2: Tests- Test Kb: Salt mist, cyclic (sodium chloride solution)

User-added image
Saudi Arabia approval to IEC 60950
User-added image
SGS (Brazil) to IEC 60950-1_2005 + A1_2009 (13.2 Volts)
 No LogoSouth Africa EMI and EMC approval to CISPR 22 Class B CISPR 24
 No LogoSouth Africa approval to SANS IEC 60950
No LOGOViration, Shock, Bump to IEC 60068-2-6:2007 -2-64:2008 -2-27:2008 -2-29 ed 2.0 Environmental testing Part 2 Tests
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
254764125.05.08mm pitch 3 position
16699013.24.545.08mm pitch 3 position
News Releases
TitleWeb Link
Very Wide Input Range 1:6 DC/DC Converter provides 60W (Watts) of DC output from an input voltage of 9-60VDC, an ideal solution for automotive and train/railway applications, Model GTD93035H6013.2-F(R)
CCC Certificate GTD93035H6013.2-F GB4943.1-2011 GB9254-2008 GB17625.1-2012 TROPICAL ALTITUDE
NOM Certificate GTD93035H6013.2-F NOM-001-SCFI-1993
CB Certificate GTD93065H6013.2-F IEC 60950-1:2005 2nd Edition + A1:2009 +A2:2013 CB Report to EN 60950-1:2006 +A11:2009 +A1:2010 + A12:2011 +A2:2013

Request Info

Text us your inquiry