Request Information Download PDF
GT-96180-18VV-T2-SP, ITE Power Supply, Desktop/External, Single Port Power Over Ethernet Midspan  (IEEE802.3af PoE PSE), , Input Rating: 100-240V~, 50-60 Hz, IEC 60320/C8 AC Inlet connector, Class II, Non-Earth Ground (aka \ GT-96180-18VV-T2-SP
Information
Model NumberGT-96180-18VV-T2-SP
DescriptionGT-96180-18VV-T2-SP, ITE Power Supply, Desktop/External, Single Port Power Over Ethernet Midspan (IEEE802.3af PoE PSE), , Input Rating: 100-240V~, 50-60 Hz, IEC 60320/C8 AC Inlet connector, Class II, Non-Earth Ground (aka "Figure-8"), Output Rating: 18 Watts, Power rating with convection cooling (W) , 18-56V in 0.1V increments, Approvals: CCC; CB 62368; Patent US9838207B2; EAC; WEEE; VCCI; Ukraine; RoHS; China RoHS; Level VI; CE; Double Insulation; PSE; ETL; S-Mark 60950; RCM; CB 60335;
Agency Documentshttp://www.globtek.info/certs/GT-96180-POE/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttps://globtek.secure.force.com/models/ec_declaration?id=a0Oa000000FiJitEAF
CE EC-Declaration for HouseholdContact GlobTek for more information
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0Oa000000FiJitEAF
REACH Declarationhttps://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttps://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeDesktop/External
TechnologySingle Port Power Over Ethernet Midspan (IEEE802.3af PoE PSE)
CategoryITE Power Supply
Input Voltage Range (V)100-240V~, 50-60 Hz
Max Input Current (A)0.6A
Max Output Power Rating (W)18
Output Voltage Range (V)18-56
EfficiencyVI
Ingress Protection
Size (mm)107*55*36
Enclosure




User-added image




 
Rating Table
Model Number (Final ordering #/Part No to be defined) VoltageAmps (A)Watts (W) RFQ
GT-96180-1830-12.0-T2-SP* 18118
* (Final ordering #/Part No to be defined)
Specifications
GlobTek’s GT-96180-1856 Active Power over Ethernet Midspan Injector offers a cost effective and reliable solution for remote powering of wireless LAN Access Points, voice over IP (VoIP) phones, security cameras, RFID readers and other IP terminals up to 18W, using existing network infrastructure. This injector is configured to provide 18W of power per port over two pairs (Mode B) in compliance with IEEE 802.3af standard.
 
The GT-96180-1856 Active PoE Injector is designed to function with and provide power to any IEEE 802.3af compliant PoE device.

MAIN FEATURES
- Withstands high energy EMI immunity events without going into latched shutdown state
- Enhanced 18W output power capability
- IEEE 802.3af detection, disconnect and overload protection
- LED user interface for “power good” and fault conditions
- Compliant to PoE+,  10/100/1000 Base-T data rates
- Universal input power from 100VAC to 240VAC
- Unique patented green design: Compliant to DoE Efficiency level VI requirement
- Full protection for over-voltage and over-current
- Compact 104 x 54 x 40 mm (w/o mounting flange)

APPLICATIONS
- VoIP Phones
- VoIP Phone with Video
- Wireless Access Points
- Bluetooth Access Points
- Multi-Band Wireless Access Points
- Network Security Cameras
- Point of Sales
- Industrial Controllers
- Electronic Time Card Readers
- Building Security Systems
- Network Camera with Pan, Tilt and Zoom Features
- Electronic Signs
- RFID Readers
- Motion Sensors
- HVAC Controllers
- Magnetic Card Readers
- PDAs
- Digital Time clock



A) ELECTRICAL SPECIFICATIONS


INPUT
Input Voltage: 90-264 VAC (85-264VAC @ 85% of rated output power)
Input Line Frequency: 47-63Hz
Input Current: <0.6A RMS @ 90VAC, @ full load
Inrush Current: 60A (typ.), cold start @ 25°C at 230VAC
No load Power: <100mW
Efficiency: >85% (typ.), 4-point average efficiency, @ full load/230 VAC
Turn on-delay: 1 second typical @ 115VAC
Input Line Protection: MOV transient protected
Hold-up time: 8ms typical at nominal input voltage and full load
Leakage current: <100µA
Isolation: 3000 VAC

OUTPUT
Number of Ports: 1
Data Rates: Compliant to PoE+, 10/100/1000 Mbits/second Ethernet speed
Power Injection Method:

IEEE 802.3af “Midspan” Mode B, using pins 4 & 5 (DC+) and 7 & 8 (DC-)
                        Mode A configuration, using pins 1 & 2 and 3 & 6 available upon special request
            Please read our article Power over Ethernet (PoE) Mode A vs. Mode B for more information.
Port Voltage:  56VDC (nom.), measured between pins 4 & 5 and 7 & 8
Port Current: 0 to 320mA (max.)
Port Power:  18W (max.)
Port Voltage Regulation: Complies with IEEE 802.3af requirements
Port Voltage Ripple: Complies with IEEE 802.3af requirements
Port Voltage Transient Performance: Complies with IEEE 802.3af requirements
Port Overload Protection: Complies with IEEE 802.3af Requirements. Port will shut down during overload and auto recover when overload is removed.
Port Short Circuit Protection: Complies with IEEE 802.3af Requirements. Port will shut down during short circuit and auto recover when short is removed.
Port Power Disconnection Method: Automatic disconnect if < 10mA minimum load detected per IEEE 802.3af standard.

USER INTERFACE

Green LED status indicator with four possible states:
            1. No light: No powered device detected at end of Ethernet cable
            2. Flashing at 1.5Hz: Detection (hand-shaking) in-process with Powered Device (PD)     

            3. Continuous light: Good connection with Powered Device (PD)
            4. Flashing at 10Hz: Over current condition


B) ENVIRONMENTAL
Temperature (Operating): -10°C to 40°C
Temperature (Storage): -30°C to 80°C
Humidity:  0% to 95% relative humidity, non-condensing
Altitude: Operating, up to 5000m

C) MECHANICAL / ENCLOSURE

Housing: High impact plastic, 94V-0 polycarbonate, non-vented
Markings: Label, pad printed, and/or laser-etched onto the case

Dimensions: 104x54x40mm (w/o mounting flange)
Weight: 0.35lb (159g)

AC Input Mechanical Options:

            Desktop with C6, C8, C14 or C18 IEC Inlet.
            Hybrid housing (Desktop or inter-changeable blade wall plug-in), Class I or Class II input
Data and Data+Power Connector: Fully Shielded RJ45

D) EMISSIONS AND IMMUNITY
Emissions: Complies with FCC Class B Part 15, EN55022 Class B
Immunity: Complies with the following;:

EN610000-6-2 (Industrial Level Immunity Compliance, extended levels shown in parenthesis)
EN 61000-4-2 ESD (+/-18KV Air, +/-8KV Contact, criteria A) (+/-20KV Air, +/-10KV Contact, criteria B)
EN 61000-4-3 Radiated Immunity
EN 61000-4-4 EFT (+/-2.5KV, criteria A) (+/-4KV, criteria B)
EN 61000-4-5 Surge   (+/-2KV Line-Line, +/-4KV Line to Gnd, criteria A)
EN 61000-4-6 Conducted Susceptibility
EN 61000-4-11 Voltage Dips and Interrupts
EN 61000-3-2 Harmonics, Class A
 
REGULATORY COMPLIANCE

Compliant Safety Standards: See listings at end of this drawing for specifics

IEEE 802.3af: Product tested per the requirements of IEEE 802.3af

INTEROPERABILITY: Product's interoperability performance verified with various third
party PoE enabled systems. See table below.

 
SPECIAL OPTIONS
1. Custom markings
2. Reduced output power rating
3. High reliability PCB laminate with plated through holes for IPC610 Class 2 compliance
4. Special housing colors
5. 48V to 54V output voltage, contact GlobTek for availability

 

User-added image
Derating CurveUser-added image
Qty (ea.)/Carton48
Individual Box/Gift Box Size (mm)Egg Crate
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)410 x 450 x 195
Gross Weight (kg)
Label Width (mm)40
Label Height (mm)80
Input Configuration
DescriptionIEC 60320/C8 AC Inlet connector, Class II, Non-Earth Ground (aka "Figure-8")
User-added image
Mates with IEC 60320/C7 Plug

Below are standard cordsets which are "not included" (unless stated above); these may be purchased separately or packaged with the power supply. Please contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.

Standard International IEC 320/C7 Cordsets
2094112M703(R)Argentina (Type I)IRAM 2063IEC 320/C720007
5014112M703A(R)Australian (Type I)AS 3112IEC 320/C720007
207B4111M8703(R)Brazil (Type N)NBR14136IEC 320/C718006
4533501M8703(R)China (Type A)GB 2099.1IEC 320/C718306
2074112M703A(R)European (Type C)CEE 7/16IEC 320/C720007
2084111M8703(R)India (Type M)BS 546IEC 320/C718006
451J3401M8703(R)Japan (Type A)JIS 8303IEC 320/C718306
2044112M703A(R)Korea (Type C)KS C8305IEC 320/C720007
4511116F703A(R)N. American (Type A)NEMA 1-15PIEC 320/C718306
4033401M8703A(R)Taiwan (Type A)CNS690IEC 320/C718306
6104112M703A(R)UK, Hong Kong, Singapore, Gulf States (Type G)BS1363IEC 320/C720007
Approvals
LogoDescription

No Logo Applicable

IEC 60335-1:2010 (Fifth Edition) incl. Corr. 1:2010 and Corr. 2:2011 + A1:2013

No Logo Applicable

CB for IEC 62368-1:2014 (Second Edition)
 User-added imageCCC to GB4943. 1-2011; GB9254-2008; GB17625. 1-2012 with Tropical and Altitude up to 5000 m approval.
User-added image  CE Certification
User-added imageInformation Technology Equipment Safety Part 1: General Requirements (UL 60950-1 Issued: 2007/03/27, Ed: 2 Rev: 2014/10/14) Information Technology Equipment Safety Part 1: General Requirements (CSA C22.2 No. 60950-1 Issued: 2007/03/27 Ed: 2 (R2012) Amd.
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php

 
User-added image  Declaration ДС № ЕАЭС N RU Д-US.КА01.В.10453_19 Custom Union of Russia, Belarus and Kazakhstan http://www.globtek.com/redirect/?loc=gost-certificate-eac-declaration
 User-added image
 
Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
Patent US9838207B2Protected by US and international patents, US patent number US9838207B2
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
User-added image
 
RCM certificate SAA-161679-EA; Australia and New Zealand Regulatory Compliance, Mark (http://rcm.standards.org.au/rcmfaq/rcmfaq.htm
RoHSSpecifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
User-added imageS-Mark Certificate EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011+A2:2013 (http://www.intertek.com/marks/s/)
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products (Stock items)
SKUVolts OutCurrent Out (Amps)ConnectorRFQSample Request
273162181None

Request Info

World map English (US)
Call
Email
💬
Text
💁
Chat
?
Request a Quote
Can we help you?
Can we help you?