Request Information Download PDF Configure Output Connector
GTM41078-WWVV-X.X-USB GTM41078-WWVV-X.X-USB
USB charger power supply AC adapter certified to 60601-1 Medical Grade , 6W
Information
Model NumberGTM41078-WWVV-X.X-USB
Description60601-1 certified Medical USB wall plug in charger power supply with integrated USB receptacle, available in outputs from 5-6VDC. Changeable input plugs available for North America, Europe, United Kingdom, Australia, China, Korea, Argentina, Brazil
Agency Documentshttp://www.globtek.info/certs/GTM41078-USB/
CE EC-Declaration for Medicalhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000HThBrEAL
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000HThBrEAL
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000HThBrEAL
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC
CategoryITE / Medical Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.3A
Wattage (W)6
Vout Range (V)5
EfficiencyV
Ingress ProtectionIndoor Use
Size (mm)41.0 x 71.0 x 31.5
EnclosureUser-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GTM41078-0505-USB 515 RFQ
GTM41078-0605-USB 51.26 RFQ
GTM41078-0506-0.8-USB 5.21.155.98 RFQ
GTM41078-0506-USB 60.834.98 RFQ
GTM41078-0506-USB 60.834.98 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
1. Input Voltage: Specified 90-264 Vac, Nameplate rated 100-240 Vac
2. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60 Hz
3. Output Power (Rated): 6Watts maximum
4. Output Regulation: +/- 5% measured at the output connector measured at the end of a 1 meter USB cordset employing #22 Gauge conductors
5. Line Voltage Regulation: +/- 1% typical measured at the output connector measured at the end of a 1 meter USB cordset employing #22 Gauge conductors
6. Output Ripple (Vp-p): +/-1% or 100 mV whichever is greater measured at the end of a 1 meter USB cordset employing #22 Gauge conductors. Measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector.
7. Turn-On/Turn-Off Overshoot: 5% maximum, 500 us maximum recovery time for 25% step load.
8. Turn-On Delay: 3000 mSEC maximum
9. Hold-Up Time: 8mSec maximum at nominal input and full load.
10. Inrush Current: 30A typical @ 115Vac input ; 60A typical @ 230Vac input
11. Switching Frequency: 66.5 KHz typical

B) PROTECTION
1. Over-Voltage Protection: 110% to 140% of nominal output voltage: Protected unit will recover upon removal of fault
2. Short Circuit: Electronically Protected, unit will recover upon removal of fault
3. Input Protection: Input line fusing

C) SAFETY
1. Dielectric Withstand Voltage: 5656Vdc from primary to secondary
2. Earth Leakage Current: N/A for Class II units, there is no PE Ground pin, so Earth Leakage current is not measured
3. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition)
4. Means of Protection: 2 x MOPP
5. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006

D) OTHER:
1. MTBF: 200,000 hours @ 25°C ambient temperature
2. Operating Temperature: 0°C to 40°C ambient temperature
3. Humidity: 0% to 95% relative humidity
4. Storage Temperature: -40°C to 80°C

E) ENCLOSURE
1. Housing: High impact plastic, 94V0 polycarbonate, non-vented
2. Size: 41.0 x 71.0 x 31.5 mm +/-1.0 mm
3. Markings: Label and/or Pad Printed and/or Molded in the case
Derating Curve
Qty (ea.)/Carton210
Individual Box/Gift Box Size (mm)74 x 35 x 42
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)544 x 375 x 151
Gross Weight (kg)14.8
Label Width (mm)29.0
Label Height (mm)18.0
Input Configuration
DescriptionBlade Options for Q Series Wall Plug-in Power SuppliesData Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: Q-Blade Style Instruction Video




blades
User-added imageUser-added image
11                           12

INPUT CONNECTOR: Q-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "Q-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: Q-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: Q-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: Q-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: Q-EU(R)
05. Korean KS C8305 configuration: 2 pins, Class II; KR P/N: Q-KR(R)
06. Argentina IRAM 2073 configuration: 2 blades; AR P/N: Class II Q-AR(R)
07. China GB 2099 configuration: 2 blades, Class II; CN P/N:Q-CN(R)
08. India IS 1293 6A/SANS 164-3/BS546 configuration: 5A, 3 pins with Dummy Ground, Class II; IN P/N: Q-IN(R)
09. IEC320/C18 Inlet, Class II; P/N: Q-C18(R)
10. Brazilian NBR6147 configuration: 2 pins, Class II; BR P/N: Q-BR(R)
11. S. African SANS 164-1 configuration: 2 pins with Dummy Ground, Class II; SA P/N: Q-SANS164-1-16A(R)
12.  Israel / Malaysia / Singapore British Standard BS 546-15A configuration: 2 pins with Dummy Ground, Class II; P/N: Q-BS546-15A(R)

Kits

01. Q-KIT: 1,2,3,4 above
02. Q-KIT-INTL: 2,3,4 above
03. Q-KIT-6: 1,2,3,4,5,6 above
04. Q-KIT-7: 1,2,3,4,5,6,7 above
05. Q-KIT-8: 1,2,3,4,5,6,7,8 above

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added image
R32282
 
Taiwan BSMI 5V design only; http://www.bsmi.gov.tw/wSite/ct?xItem=4072&ctNode=816&mp=2
No Logo ApplicableCB report IEC60601-1 2005 A1+C1+C2 2016-2-4 and or EN 60601-1:2006 3.1rd Edition 2xMOPP (for GTM41078-WW05 only)
No Logo CB Report IEC60950-1:2005 (2nd Edition), Am 1: 2009 and EN 60950-1:2006 + Am 1:2010 + Am 11:2009 + Am 12:2011 (for GTM41078-WW05 only)
User-added imageCCC to GB4943.1-2011 GB9254-2008 GB17625.1-2012, Tropical <2000
User-added image  CE Mark: tested to comply with EN 60601-1-2:2007 Medical electrical equipment Part 1-2: - Mark is on the label or Molded in the case
User-added imagecETLus ANSI_AAMI ES60601-1_2005 (for GTM41078-WW05 only)
User-added imageConforms to ANSI/UL Std. 60950-1 2nd Edition Cert. to CAN/CSA Std.C22.2 NO.60950-1 2nd Edition (for GTM41078-WW05 only)
User-added image
 
cETLus-Cert-4007497 ANSI/AAMI ES60601-1:2005 with AMD C1: 2009, AMD C2: 2010 and CAN/CSA-C22.2 No. 60601-1 2008 with COR 2:2011+ANSI/AAMI HA60601-1-11 Ed:1 for T2 only (for GTM41078-WW05 only)
User-added image
 
cETLus-Cert-60950-1 4007497 Listed (for GTM41078-WW05 only)
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image  Certification # TC RU AR46.B.69004 Custom Union of Russia, Belarus and Kazakhstan
No LogoEC-Conformity Declaration: http://www.globtek.com/html/iso_certificates/EC-DECLARATION.pdf, REACH 144 SVHC: http://www.globtek.com/html/iso_certificates/Reach144.pdf
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP20Ingress Protection: IP20 to IEC60529:2001 Protected against solids objects over 12mm and No Protection
User-added imageIRAM certificate DC-E-G71-001.10 to IEC 60950-1:2005 + A1:2009
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50315169, to J60950-1(H26) , J55022(H22),[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50315169, to J60950-1(H26) , J55022(H22),[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageHU10499-15021A GTM41078-0605-USB (5V only)
No LogoKuwait GTM41078-0605-USB IEC 60950-1:2005(2 ND EDITION) + Am 1:2009 + Am 2:2013
 User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
LPSLimited Power Source
User-added image
 
NOM (ETL) to NOM-001-SCFI-1993 (5 Volts only)
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
User-added imageRCM certificate to SAA152289EA ; Australia and New Zealand Regulatory Compliance, Mark (http://rcm.standards.org.au/rcmfaq/rcmfaq.htm
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added imageSemko S-Mark-Cert-EN60601-1 3rd Edition (http://www.intertek.com/marks/s/) (for GTM41078-WW05 only)

User-added image
Saudi Arabia approval GTM41078-0605-USB IEC 60950-2005
User-added imageSerbia Approval - Conformity mark must be at least 5 mm high.
User-added image

 
SGS (Brazil) to IEC 60950-1_2005(ed.2) + A1 2009 +A2 2013 EN60950-1:2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013
 No LogoSouth Africa approval to SANS IEC 60950
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
16173251Type "A" USB “JACK”, integral to power supply enclosure
33902551.2Type "A" USB “JACK”, integral to power supply enclosure
17481451.2Type "A" USB “JACK”, integral to power supply enclosure
17548051.2Type "A" USB “JACK”, integral to power supply enclosure
17752951.2Type "A" USB “JACK”, integral to power supply enclosure
19197051.2Type "A" USB “JACK”, integral to power supply enclosure
19322551.2Type "A" USB “JACK”, integral to power supply enclosure
19322751.2Type "A" USB “JACK”, integral to power supply enclosure
19597551.2Type "A" USB “JACK”, integral to power supply enclosure
19724751.2Type "A" USB “JACK”, integral to power supply enclosure
19835951.2Type "A" USB “JACK”, integral to power supply enclosure
19836651.2Female Barrel 3.5*1.35*9.5mm, Locking with Spring-loaded or Equal
18037351.2Type "A" USB “JACK”, integral to power supply enclosure
18075251Type "A" USB “JACK”, integral to power supply enclosure
16707051.2Type "A" USB “JACK”, integral to power supply enclosure
26454151.2Type "A" USB “JACK”, integral to power supply enclosure
26339351.2Type "A" USB “JACK”, integral to power supply enclosure
18352651.2Type "A" USB “JACK”, integral to power supply enclosure
18648751.2Type "A" USB “JACK”, integral to power supply enclosure
18711851.2Type "A" USB “JACK”, integral to power supply enclosure
18792451.2Type "A" USB “JACK”, integral to power supply enclosure
21134851.2Type "A" USB “JACK”, integral to power supply enclosure
19975751.2Type "A" USB “JACK”, integral to power supply enclosure
22629051.2Type "A" USB “JACK”, integral to power supply enclosure
22649151.2Type "A" USB “JACK”, integral to power supply enclosure
22760151.2Type "A" USB “JACK”, integral to power supply enclosure
23746451.2Type "A" USB “JACK”, integral to power supply enclosure
21775051.2Type "A" USB “JACK”, integral to power supply enclosure
2178175.01.2Type "A" USB “JACK”, integral to power supply enclosure
2177515.21.15Type "A" USB “JACK”, integral to power supply enclosure
1828515.20.96Type "A" USB “JACK”, integral to power supply enclosure
News Releases
TitleWeb Link
USB AC Adapter/Power Supply Certified to ANSI/AAMI ES60601-1 for the United States and Canada and EN/IEC 60601-1, 3rd edition for Europe, Asia, and Africa and is rated up to 6W output with 5-6V output options., Model Series WR9QA1000USBNMEDRVB GTM41078-06http://en.globtek.com/news.php/usb-ac-adapter-power-supply-certified-to-ansiaami-es60601-1-for-the-united-states-and-canada-and-eniec-60601-1-3rd-edition-for-europe-asia-and-africa-and-is-rated-up-to-6w-output-with-5-6v-output-options-model-series-wr9qa10
USB Medical (60601-1) Power Supply AC Adapter Certified to IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007) and EN 60601-1:2006 + A11:2011 via CB Report a is rated up to 5W output with 5-36V output options. Model Series GTM41078-USBhttp://en.globtek.com/news.php/usb-medical-60601-1-power-supply-ac-adapter-certified-to-iec-60601-1-2005-corr-1-2006-corr-2-2007-and-en-60601-12006-a112011-via-cb-report-a-is-rated-up-to-5w-output-with-5-36v-output-options-model-series-gtm41078-usb#.Uk8AT
USB Medical (60601-1) External Freestanding Power Supply AC Adapter Certified to ANSI/AAMI ES60601-1 for the United States and Canada is rated up to 6W output with 3.3-48V output options., Model Series GTM41078-USBhttp://en.globtek.com/news.php/usb-medical-60601-1-external-freestanding-power-supply-ac-adapter-certified-to-ansiaami-es60601-1-for-the-united-states-and-canada-is-rated-up-to-6w-output-with-33-48v-output-options-model-series-gtm41078-usb#.Uk8RLxA6DaM
Korean Certificate GTM41078-0605-USB K60950-1(2.0)(2011-12)

Request Info

Text us your inquiry