Request Information Download PDF
GT-G3104P200VV-X.X-C GT-G3104P200VV-X.X-C
Model NumberGT-G3104P200VV-X.X-C
DescriptionGT-G3104P200VV-X.X-C, ITE Power Supply, Enclosed-Metal, Single Output Power supply, , Input Rating: 90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz), Terminal Block, Output Rating: 200 Watts, 5-48V in 0.1V increments, Approvals: CE China RoHS Class I cUL PSE RoHS 2 Ukraine VCCI WEEE
Agency Documents
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITE
RoHS/RoHS2 Declaration
REACH Declaration
Conflict Minerals Declaration
Model Parameters
TechnologySingle Output Power supply
CategoryITE Power Supply
Input Voltage90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz)
I/P Amps (A)4.0A / 115VAC, 2.0A / 230VAC
Wattage (W)200
Vout Range (V)5-48
Ingress ProtectionIPX0
Size (mm)98x42x197 mm
EnclosureUser-added image

Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-G3104P20024-C 248.4201.6 RFQ
Universal AC input / Full range
Built in active PFC function, PF > 0.90
Green design, No-load power consumption < 0.7W Protection: Short circuit, Over load, Over voltage
Brown-out (Low AC Input Voltage) High operation temperature up to 70°C

Input and output
Voltage Range: 90 ~ 264VAC, 127 ~ 370VDC
De-rating may apply in low input voltage.
Frequency Range: 50 / 60Hz
Power Factor (Typ.): > 0.92 / 230VAC, > 0.98 / 115VAC at full load
Efficiency (Typ.): 83% - 93%
AC Current (Typ.) 2.3A / 115VAC, 1.2A / 230VAC
Inrush Current (Typ.) 30A / 115VAC, 55A / 230VAC
Leakage Current: < 2.0mA / 230VAC
Ripple & Noise (Max.): from 100mVp-p (5V) to 200mVp-p (48V)Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.
Voltage Adj. Range ±10% Typical adjustment by potentiometer
Voltage Tolerance Tolerance: includes set up tolerance, line regulation and load regulation.
Line Regulation ±1% to ±0.5%
Load Regulation ±1% to ±0.5%
Setup, Rise Time < 2500ms, < 110ms at full load
Hold Up Time (Typ.) > 32ms / 230VAC, > 10ms / 115VAC at full load

Over Load > 105% rated output power
Protection type: Hiccup mode
Over Voltage 115 ~ 150% rated output voltage
Protection type: latch-off mode
Over Temperature 90 ±5°C detect on NTC
Protection type: shut down o/p voltage, after temperature goes down and re-power ON to recover

Auxiliary Power 5V / 0.3A (±3%)
Remote ON / OFF Control External switch or NPN Transistor to turn ON / OFF
Power OK Signal Open drain signal low when PSU turns on, Max. sink current: 20mA, Max. drain voltage: 40V.

Working Temp. -20 ~ +70°C (Refer to output load de-rating curve)
Working Humidity 20 ~ 90% RH non-condensing
Storage Temp. & Humidity -40 ~ +85°C, 10 ~ 95% RH
Temp. Coefficient ±0.03% / °C (0 ~ 50°C)
Vibration 10 ~ 500Hz, 1G 10min. / 1cycle, period for 60min. each along X, Y, Z axes Compliance to IEC 60068-2-6-2007

Safety & EMC
Safety Standards Certified UL 60950-1; EN 60950-1
Withstand Voltage I/P-O/P: 3KVAC (4242VDC), I/P-FG: 1.5KVAC (2121VDC), O/P-FG: 0.5KVAC (707VDC), 1min
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC
EMI Conduction & Radiation Certified EN 55022; EN 61000-6-3
Harmonic Current Certified EN 61000-3-2; EN 61000-3-3
EMS Immunity Certified EN 61204-3; EN 55024; EN 61000-6-1, IEC 61000-4-2, 3, 4, 5, 6, 8, 11

MTBF 327.7K HRS Certified MIL-HDBK-217F
Cooling Load and temperature control fan
Dimension (WxHxH) 98x42x197 mm / 3.858x1.654x7.756 inch
Packing 0.86kg; 24pcs / 20.64kg / 1.29CUFT
Derating CurveUser-added image
Qty (ea.)/Carton18
Individual Box/Gift Box Size (mm)220*110*45
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)TBD
Gross Weight (kg)20.1
Label Width (mm)90.0
Label Height (mm)30.0
Input Configuration
DescriptionTerminal Block
User-added imageAttention Mark / Refer to operating manual for operating and service instructions
User-added image  CE Certification
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart:
User-added image
Class I Earth Ground
User-added imageUL60950-1, cULus to UL 60950-1 E170507
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan:
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006
User-added imageUkraine UKRSepro (Document:
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU ( Mark is on the label or Molded in the case

Request Info

Text us your inquiry