IMR14650 |
---|
 | IMR14650, , , , , Input Rating: , , Output Rating: Watts, Power rating with convection cooling (W) , V in 0.1V increments, Approvals: IMR14650, , , , , Input Rating: , , Output Rating: Watts, Power rating with convection cooling (W) , V in 0.1V increments, Approvals: |
---|
Information |
---|
Model Number | IMR14650 |
---|
Agency Documents | http://globtek.info/certs/IMR14650/ |
---|
CE EC-Declaration for Medical | Contact GlobTek for more information |
---|
CE EC-Declaration for Industrial/Commercial/ITE | Contact GlobTek for more information |
---|
CE EC-Declaration for Household | Contact GlobTek for more information |
---|
UKCA-Declaration for Medical | Contact GlobTek for more information |
---|
UKCA-Declaration for Industrial/Commercial/ITE | Contact GlobTek for more information |
---|
UKCA-Declaration for Household | Contact GlobTek for more information |
---|
Morocco SDoC Declaration | https://globtek.secure.force.com/models/Morocco_SDoC_Declaration?id=a0O3a00000MnfblEAB |
---|
RoHS/RoHS3 Declaration | https://www.globtek.com/pdf/rohs_cert/a0O3a00000MnfblEAB |
---|
Prop 65 Statement | https://en.globtek.com/prop-65-statement.pdf |
---|
REACH Declaration | https://www.globtek.com/pdf/iso_certificates/REACH.pdf |
---|
Conflict Minerals Declaration | https://www.globtek.com/pdf/conflict-minerals.pdf |
---|
Model Parameters |
---|
Type | |
---|
Technology | |
---|
Category | |
---|
Input Voltage Range (V) | |
---|
Max Input Current (A) | |
---|
Max Output Power Rating (W) | |
---|
Output Voltage Range (V) | |
---|
Efficiency | |
---|
Ingress Protection | |
---|
Size (mm) | |
---|
Enclosure | |
---|
Rating Table |
---|
Model Number (Final ordering #/Part No to be defined) | Voltage (V) | Current (A) | Power (W) | RFQ |
---|
* (Final ordering #/Part No to be defined) |
Specifications |
---|
Section 1 & 2 intentionally left blank. No. | Item | Specification | Condition / Note | 3.01 | Nominal Capacity | 950mAh | Std. charge / discharge | Minimum Capacity | 900mAh | 3.02 | Nominal Voltage | 3.7V | | 3.03 | Charge mode | CC,CV | | 3.04 | Charge Voltage | 4.2V | Max. Charge Voltage | 3.05 | Standard Charge Current | 475mA | Refer to 4.1 | 3.06 | Fast Charge Current | 1900mA | Refer to 4.3 | 3.07 | Charge cut-off current | 19mA | | 3.08 | Charge time | 1-6h | | 3.09 | Discharge End Voltage | 3.0V | | 3.10 | Standard Discharge Current | 475mA | Refer to 4.2 | 3.11 | Fast Discharge Current | 10 000mA | Refer to 4.3 | 3.12 | Max. Discharge Current | 15 000mA | Peak Current | 3.13 | Initial AC Impedance | ≤35mΩ | without PTC | 3.14 | Cell Dimension | 13.9±0.3mm | Diameter | 65.0±0.5mm | Height | 3.15 | Weight | ≈21.2g | | 3.16 | Operation Temperature Range 60±25%R.H. Bare Cell | 0~50℃ | Charge | -20~60℃ | Discharge | 3.17 | Storage Temperature (60±25%R.H. at the shipment state) | -20℃ ~ 50℃ -20℃ ~ 45℃ -20℃ ~ 20℃ | 1 month 3 month 1 year | 3.19 | Cycle Life (Temperature:25±5℃) | 1, Charge: Refer to 4.1 2, Rest time: 10 min 3, Discharge: Refer to 4.2 4. Rest Time: Between Charge and Discharge 10min | Capacity remaining rate ≥ 70% (of Cnom in 2.1) after 500 cycles |  4. Performance Specification |
| 4.1 Standard test condition 4.1.1 Standard Charge Unless otherwise specified, “Standard Charge” shall consist of charging at constant current of 475mA. The cell shall then be charged at constant voltage of 4.2V while tapering the charge current. Charging shall be terminated when the charging current has tapered to 19mA. For test purposes, charging shall be performed at 25±5℃. 4.1.2 Standard Discharge “Standard Discharge” shall consist of discharging at a constant current of 475mA to 3.0V. Discharging is to be performed at 25±5℃ unless otherwise noted (such as capacity versus temperature). 4.1.3 Fast Charge / Discharge condition Cells shall be charged at constant current of 1900mA to 4.2V with end current of 19mA. Cells shall be discharged at constant current of 10 000mA to 3.0V. Cells are to rest 30 minutes after charge and 30 minutes after discharge. |
4.2 Environmental specification. | | Item | Condition | Specification | | | | 4.2.1 Storage Characteristics | Cells shall be charged per 4.1.1 and stored in a temperature-controlled environment at 25±5℃ for 30 days. After storage, cells shall be discharged per 4.1.2 to obtain the remaining capacity. | Capacity remaining rate ≥ 90% (of Cnom in 2.1) | | | | 4.2.2 High Temperature Storage Test | Cells shall be charged per 4.1.1 and stored in a temperature-controlled environment at 60ºC for 1 week. After storage, cells shall be discharged per 4.1.2 and cycled per 4.1.1 and 4.1.2 for 3 cycles to obtain recovered capacity. | No leakage, Capacity recovery rate ≥80% (of Cnom in 2.1) | | | | 4.2.3 Thermal Shock Test | 65ºC (8h) ← 3hrs → -20ºC (8h) for 8 cycles with cells charged per 4.1.1 After test, cells are discharged per 4.1.2 and cycled per 4.1.1 and 4.1.2 for 3 cycles to obtain recovered capacity. | No leakage Capacity recovery rate ≥80% (of Cnom in 2.1) | | | 4.3 Temperature Dependency of Capacity. | | Discharge Temperature | -10℃ | 0℃ | 23℃ | 60℃ | | | | Discharge Capacity | 60% | 80% | 100% | 95% | | | Cells shall be charged per 4.1.1 at 25±5℃ and discharged per 4.1.2 at the following temperatures. |
|
Derating Curve | |
---|
Qty (ea.)/Carton | |
---|
Individual Box/Gift Box Size (mm) | |
---|
Individual Box/Gift Box Color | White |
---|
Master Carton Size (mm) | TBD |
---|
Gross Weight (kg) | |
---|
Label Width (mm) | |
---|
Label Height (mm) | |
---|
Input Configuration |
---|
Description | |
---|