Request Information Download PDF Configure Output Connector
GTM41133-90VV-x.x-T2 GTM41133-90VV-x.x-T2
IEC 60601-1-11 & 60601-1-2 4th Edition, 60950-1, and UL1310 Compliant 90W Medical power supply (and Class 2 Power Unit/LPS) available in 12-48V outputs.
Information
Model NumberGTM41133-90VV-x.x-T2
DescriptionOn 7/9/14, the FDA added the 4th edition of IEC 60601-1-2 to the list of standards that can be used to show EMC compliance for medical electrical devices and systems. The GTM41133 is certified compliant and additionally qualified as a Class 2 power Unit.
Agency Documentshttp://globtek.info/certs/GTM41133/
CE EC-Declaration for Medicalhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000HSxmIEAT
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000HSxmIEAT
RoHS/RoHS3 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000HSxmIEAT
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeDesktop/External
TechnologyRegulated Switchmode AC-DC Power Supply AC Adaptor
CategoryITE / Medical Power Supply
Input Voltage Range (V)100-240V~, 50-60 Hz
Max Input Current (A)1.5A
Max Output Power Rating (W)90
Output Voltage Range (V)12-48
EfficiencyV
Ingress ProtectionIP21
Size (mm)149.38 x 62.6 x 33.5 +/-1.0 mm
EnclosureUser-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GTM41133-9016-4.0-T2 127.590 RFQ
GTM41133-9016-1.0-T2 151.0615.9 RFQ
GTM41133-9024-5.0-T2 194.7389.87 RFQ
GTM41133-9024-T2 243.7590 RFQ
GTM41133-9048-22.0-T2 263.4689.96 RFQ
GTM41133-9048-12.0-T2 362.590 RFQ
GTM41133-9048-10.5-T2 37.52.490 RFQ
GTM41133-9048-T2 481.87590 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-400 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector
04. Line Voltage Regulation: +/- 1% typical measured at full load
05. Output Ripple (Vp-p): +/-1% or 150 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
06. Turn-ON/OFF Overshoot: 5% maximum, 1 mS typical recovery time for 25% to 50% step load
07. Turn-ON Delay: 1 sec, maximum @ full load, nominal line
08. Hold-Up Time: 8 mS typical @ nominal input voltage and full load
09. Inrush Current: 30/60A maximum cold start @ 115/230Vac input
10. Switching Frequency: 65 KHz typical

B) PROTECTION
01. Over-Voltage: Electronically Protected Zener clamp across the output
02. Short Circuit: Electronically Protected unit will auto recover upon removal of fault
03. Input Protection: Input line fusing

C) SAFETY
01. Dielectric Withstand Voltage: 5656Vdc from primary to secondary
02. Earth Leakage Current: N/A for Class II units, there is no PE Ground pin, so Earth Leakage current is not measured
03. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition)
04. Primary to Secondary Isolation: 2 MOPP

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection
06. Operating Altitude: 5,000 METERS
07. Operating Atmospheric Pressure: 700 hPa TO 1060hPa
08. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 149.38 x 62.6 x 33.5 +/-1.0 mm
03. LED to indicate "Power Out"
04. Markings: Label and/or Pad Printed and/or Molded in the case
Derating Curve
Qty (ea.)/Carton20
Individual Box/Gift Box Size (mm)Egg Crate
Individual Box/Gift Box Color
Master Carton Size (mm)427 x 405 x 158
Gross Weight (kg)15.6
Label Width (mm)47.5
Label Height (mm)75.2
Input Configuration
DescriptionIEC 60320/C8 AC Inlet connector, Class II, Non-Earth Ground (aka "Figure-8")User-added image

Mates with IEC 60320/C7 Plug

Standard International IEC 320/C7 Cordsets

Below are standard cordsets which are "not included" (unless stated above); these may be purchased separately or packaged with the power supply. Please contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.

 
Conductors (No Ground) IEC 320/C7 (Figure "8")
Part NoCountryEnd AEnd BLength
4511116F703A(R)N. AmericanNEMA 1-15PIEC 320/C71830
5014112M703A(R)AustralianAS 3112IEC 320/C72000
4533501M8703(R)ChinaGB 2099.1IEC 320/C71830
2074112M703A(R)EuropeanCEE 7/16IEC 320/C72000
451J3401M8703(R)JapanJIS 8303IEC 320/C71830
2044112M703A(R)KoreaKS C 8305IEC 320/C72000
4033401M8703A(R)TaiwanCNS 10917IEC 320/C71800
6104112M703A(R)UKBS1363IEC 320/C72000
Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added image60601-1 3rd Operating Instructions
No Logo ApplicableCB report IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007) and or EN 60601-1:2006 3rd Edition 2xMOPP
No Logo IEC 60601-1: 2005 and IEC 60601-1-11:2015

No Logo Applicable

IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
No Logo IEC 60950-1: 2005 (Second Edition) + Am 1: 2009 + Am 2: 2013
User-added image  CE Certification CE Mark: tested to comply with EN 55032.2012+AC.2013 EN 61000-3-2.2014 EN 61000-3-3.2013 EN 60601-1-2.2015 EN 55024.2010
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added image  CE Mark: tested to comply with EN 60601-1-2:2007 Medical electrical equipment Part 1-2: - Mark is on the label or Molded in the case
Conforms to ANSI/AAMI ES 60601-1:2005
Cert.to CAN/CSA Std. C22.2
 
cETLus ANSI_AAMI ES60601-1_2005
User-added image
 
cETLus-Cert-4007497 ANSI/AAMI ES60601-1:2005 with AMD C1: 2009, AMD C2: 2010 and CAN/CSA-C22.2 No. 60601-1 2008 with COR 2:2011+ANSI/AAMI HA60601-1-11 Ed:1 for T2 only
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image  Certification # TC RU AR46.B.75423 Custom Union of Russia, Belarus and Kazakhstan
User-added imageInformation Technology Equipment Safety Part 1: General Requirements >Valid without technical revision: 01Jan2022< [UL 60950-1:2007 Ed.2 +R:14Oct2014]
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP21Ingress Protection: IP21 to IEC60529:2001 Protected against solids objects over 12mm and Protected against vertically falling drops of water
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50313287, to J60950-1(H26) , J55022(H22),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50313287, to J60950-1(H26) , J55022(H22),J3000(H25)[DC15≤30V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50313287, to J60950-1(H26) , J55022(H22),J3000(H25)[DC30≤60V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
 User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
User-added imageRCM certificate SAA-170038-EA; Australia and New Zealand Regulatory Compliance, Mark (http://rcm.standards.org.au/rcmfaq/rcmfaq.htm)
RoHSSpecifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
User-added imageS-Mark Certificate EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011+A2:2013 (http://www.intertek.com/marks/s/)
User-added imageSemko S-Mark-Cert-EN60601-1 3rd Edition (http://www.intertek.com/marks/s/)
User-added imageS-Mark-Cert to IEC 60601-1-11 (First Edition): 2010 EN 60601-1-11:2010 (http://www.intertek.com/marks/s/)
User-added imageSerbia Approval - Conformity mark must be at least 5 mm high.
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
177120127.54 Pin Kycon Locking Plug or Equal
234681127.5Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
201197156Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
205258156Female Barrel 5.5*2.1*9.5mm With internal Spring Clip And Locking Notch or Equal
182737156Female Barrel 5.5*2.1*9.5mm With internal Spring Clip And Locking Notch or Equal
226170185.04 Pin Kycon Locking Plug or Equal
239876194.73Female Barrel 5.5 * 2.5 * 10mm No internal Spring Clip nor Locking Notch or Equal
196166243.752 x 6.3mm long fully insulated, flat Ferrules (Red & Blue) or Equal
213825243.754 Pin Kycon Locking Plug or Equal
213822243.754 Pin Kycon Locking Plug or Equal
199753243.753 PIN DIN FEMALE SOCKET or Equal
191531243.754 Pin Kycon Locking Plug or Equal
169719243.75Female Barrel 5.5 * 2.5 * 10mm No internal Spring Clip nor Locking Notch or Equal
172521263.46Female Barrel 5.5*2.5*9.5mm, Right Angle No internal Spring Clip nor Locking Notch or Equal
196700283.2Hirose RP34-8SP-3SC(71)
177040362.5Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
189955362.5Female Barrel Right Angle, 5.5*2.1*11mm with NO internal Spring Clip NOR Locking Notch or Equal
192728481.87Female Barrel Right Angle, 5.5*2.1*11mm with NO internal Spring Clip NOR Locking Notch or Equal
News Releases
TitleWeb Link
CB-CERT-GTM41133-T2 -T3A -F IEC 60950-1_2005 2nd Editon + A1 and EN 60950-1_2006+A11+A1+A12 CB-REPORT-GTM41133-T2 -T3A -F IEC 60950-1_2005 2nd Editon + A1_2009 and EN 60950-1_2006 + A11_2009 + A1_2010 + A12_2011
ETL-CERT-GTM41133-F UL 60950-1 2007_03_27 Ed 2 Rev 2011_12_19 + CAN_CSA C22.2 2007_03_27 Ed 2 R2012 Rev 2011_12_19 ETL-CERT-GTM41133-T2 -T3A UL 60950-1 2007_03_27 Ed 2 Rev 2011_12_19 + CAN_CSA C22.2 2007_03_27 Ed 2 R2012 Rev 2011_12_19
S-MARK-CERT-GTM41133-T2 -T3A -F EN60950-1_2006 + A11_2009 + A1_2010 + A12_2011
CB-CERT-GTM41133-T2 -T3A -F 3rd Edition 2xMOPP with RM IEC 60601-1_2005 and C1+C2 IEC 60601-1-11_2010 CB-REPORT-GTM41133-T2 -T3A -F 3rd Edition 2xMOPP with RM IEC 60601-1_2005 + Corr1(2006 )+ Corr 2(2007) and EN 60601-1_2006 + A11_2011
S-MARK-CERT-GTM41133-T2 -T3A -F EN60601-1_2006 + A11_2011 + EN60601-1-11_2010
ETL-CERT and REPORT -GTM41133-T2 -T3A -F 2xMOPP ANSI_AAMI ES606001-1 2006-03-09-2005 + CAN_CSA-C22.2 60601-1 2008-02-01 and ANSI_AAMIHA60601-1-11

Request Info

Text us your inquiry