Request Information Download PDF Configure Output Connector
GTM41133-90VV-x.x-T3A GTM41133-90VV-x.x-T3A
IEC 60601-1-11 & 60601-1-2 4th Edition, 60950-1, and UL1310 Compliant 90W Medical power supply (and Class 2 Power Unit) available in 12-48V outputs
Information
Model NumberGTM41133-90VV-x.x-T3A
DescriptionOn 7/9/14, the FDA added the 4th edition of IEC 60601-1-2 to the list of standards that can be used to show EMC compliance for medical electrical devices and systems. The GTM41133 is certified compliant and additionally qualified as a Class 2 power Unit.
Agency Documentshttp://globtek.info/certs/GTM41133/
CE EC-Declaration for Medicalhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000HSxmYEAT
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000HSxmYEAT
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000HSxmYEAT
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeDesktop/External
TechnologyRegulated Switchmode AC-DC
CategoryITE / Medical Power Supply
Input Voltage100-240V~, 50-60Hz
I/P Amps (A)1.5A
Wattage (W)90
Vout Range (V)12-48
EfficiencyV
Ingress ProtectionIP21
Size (mm)149.38 x 62.6 x 33.5 +/-1.0 mm
EnclosureUser-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GTM41133-9016-4.0-T3A 127.590 RFQ
GTM41133-9016-1.0-T3A 15690 RFQ
GTM41133-9024-5.0-T3A 194.7389.87 RFQ
GTM41133-9024-4.0-T3A 204.590 RFQ
GTM41133-9024-T3A 243.7590 RFQ
GTM41133-9048-15-T3A 332.7289.76 RFQ
GTM41133-9048-12.0-T3A 362.590 RFQ
GTM41133-9048-10.5-T3A 37.52.490 RFQ
GTM41133-9048-T3A 481.87590 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-400 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector
04. Line Voltage Regulation: +/- 1% typical measured at full load
05. Output Ripple (Vp-p): +/-1% or 150 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
06. Turn-ON/OFF Overshoot: 5% maximum, 1 mS typical recovery time for 25% to 50% step load
07. Turn-ON Delay: 1 sec, maximum @ full load, nominal line
08. Hold-Up Time: 8 mS typical @ nominal input voltage and full load
09. Inrush Current: 30/60A maximum cold start @ 115/230Vac input
10. Switching Frequency: 65 KHz typical

B) PROTECTION
01. Over-Voltage: Electronically Protected Zener clamp across the output
02. Short Circuit: Electronically Protected unit will auto recover upon removal of fault
03. Input Protection: Input line fusing

C) SAFETY
01. Dielectric Withstand Voltage: 5656Vdc from primary to secondary
02. Earth Leakage Current: Did not exceed 5 mA in NORMAL CONDITION and 10 mA in SINGLE FAULT CONDITION
03. Earth continuity test:<0.1 Ohm or < 0.2 Ohm when with a non-detachable Power Supply cord, Class I Only
04 Touch Current: Did not exceed 100uA NC(Normal condition) 500uA SFC(single fault condition)
05. Primary to Secondary Isolation: 2 MOPP

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection
06. Operating Altitude: 5,000 METERS
07. Operating Atmospheric Pressure: 700 hPa TO 1060hPa

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 149.38 x 62.6 x 33.5 +/-1.0 mm
03. LED to indicate "Power Out"
04. Markings: Label and/or Pad Printed and/or Molded in the case
Derating Curve
Qty (ea.)/Carton20
Individual Box/Gift Box Size (mm)Egg Crate
Individual Box/Gift Box Color
Master Carton Size (mm)427 x 405 x 158
Gross Weight (kg)15.6
Label Width (mm)47.5
Label Height (mm)75.2
Input Configuration
DescriptionIEC 60320/C6 AC Inlet Connector, Class I, Earth Ground ( aka "Mickey Mouse")User-added image

Mates with IEC 60320/C5 Plug

 
 Standard International IEC 320/C Cordsets

Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or package with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.

3021066F712(R)

N. American

NEMA 5-15P

IEC 320/C5

1880

6

1191068F0712(R)

N. American

NEMA 5-15P Hospital

IEC 320/C5

2459

8

2064262M0712(R)

Australian

AS3112 / 3 PRONG

IEC 320/C5

2050

7

204B4262M0712(R)

Brazil

BRAZILIAN; WS-002

IEC 320/C5

2050

7

6023592M5712(R)

China

CCC GR2099

IEC 320/C5

2500

8

23144262M0712(R)

Europe

CEE 7/7

IEC 320/C5

2050

7

2084262M0712(R)

India/S.Africa

India/S.Africa

IEC 320/C5

2050

7

23024262M0712(R)

Italy

CEI 23-16/VII

IEC 320/C5

2050

7

3003316F0712(R)

Japan

JIS 8303 / 3 PINS

IEC 320/C5

1830

6

23214262M0712(R)

Switzerland

SEV 1011 ( EL 203)

IEC 320/C5

2050

7

6104262M0712(R)

UK

BS1363

IEC 320/C5

2050

7

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added image60601-1 3rd Operating Instructions
User-added image
R32282
 
Taiwan BSMI (GTM41133-9016-1.0-T3A); http://www.bsmi.gov.tw/wSite/ct?xItem=4072&ctNode=816&mp=2
No Logo ApplicableCB report IEC60601-1 2005 A1+C1+C2 2016-2-4 and or EN 60601-1:2006 3.1rd Edition 2xMOPP
No Logo IEC 60601-1: 2005 and IEC 60601-1-11:2015

No Logo Applicable

IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
No Logo CB Certificate IEC 60950-1:2005 (2nd Edition), Am 1: 2009, CB report IEC 60950-1:2005 (2nd Edition), Am 1: 2009 and EN 60950-1:2006 + Am 1:2010 + Am 11:2009 + Am 12:2011
User-added imageCCC model meets both Tropical and Altitude to 5000M GB4943. 1-2011; GB9254-2008; GB17625. 1-2012
User-added image  CE Certification CE Mark: tested to comply with EN 55032.2012+AC.2013 EN 61000-3-2.2014 EN 61000-3-3.2013 EN 60601-1-2.2015 EN 55024.2010
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added image  CE Mark: tested to comply with EN 60601-1-2:2007 Medical electrical equipment Part 1-2: - Mark is on the label or Molded in the case
Conforms to ANSI/AAMI ES 60601-1:2005
Cert.to CAN/CSA Std. C22.2
 
cETLus ANSI_AAMI ES60601-1_2005
User-added imageConforms to ANSI/UL Std. 60950-1 2nd Edition Cert. to CAN/CSA Std.C22.2 NO.60950-1 2nd Edition
User-added image
 
cETLus-Cert-4007497 ANSI/AAMI ES60601-1:2005 with AMD C1: 2009, AMD C2: 2010 and CAN/CSA-C22.2 No. 60601-1 2008 with COR 2:2011+ANSI/AAMI HA60601-1-11 Ed:1 for T2 only
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
Class I Earth Ground
User-added image  Certification # TC RU AR46.B.75423 Custom Union of Russia, Belarus and Kazakhstan
User-added imageInformation Technology Equipment Safety Part 1: General Requirements >Valid without technical revision: 01Jan2022< [UL 60950-1:2007 Ed.2 +R:14Oct2014]
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP21Ingress Protection: IP21 to IEC60529:2001 Protected against solids objects over 12mm and Protected against vertically falling drops of water
User-added image
DC-E-G71-001.14
PRECAUCION: PARA USO EN EQUIPOS ELECTRONICOS SOLAMENTE

 
IRAM certificate DC-E-G71-001.14 to IEC 60950-1:2005 + A1:2009 +A2:2013
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50313287, to J60950-1(H26) , J55022(H22),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50313287, to J60950-1(H26) , J55022(H22),J3000(H25)[DC15≤30V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50313287, to J60950-1(H26) , J55022(H22),J3000(H25)[DC30≤60V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
 User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
User-added image
 
NOM (Mexico) to NOM-001-SCFI-1993 GTM41133-9016-1.0-T3A
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
User-added imageRCM certificate SAA-170038-EA; Australia and New Zealand Regulatory Compliance, Mark (http://rcm.standards.org.au/rcmfaq/rcmfaq.htm)
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added imageS-Mark Certificate EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011+A2:2013 (http://www.intertek.com/marks/s/)
User-added imageSemko S-Mark-Cert-EN60601-1 3rd Edition (http://www.intertek.com/marks/s/)
User-added imageSerbia Approval - Conformity mark must be at least 5 mm high.
User-added imageSingapore 170115-12 GTM41133-9016-1.0-T3A IEC60950-1:2005 + A1:2009 + A2:2013
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
266177127.54 Pin Kycon Locking Plug or Equal
180289127.5Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
176960127.5Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or Equal
174906127.54 Pin Kycon Locking Plug or Equal
182525156Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
380640156Female Barrel 5.5*2.1*9.5mm With internal Spring Clip And Locking Notch or Equal
236760156Female Barrel 5.5 * 2.5 * 9.5mm with internal Spring Clip and Locking Notch or Equal
182559156Female Barrel 5.5*2.1*9.5mm With internal Spring Clip And Locking Notch or Equal
182558156Female Barrel 5.5*2.1*9.5mm With internal Spring Clip And Locking Notch or Equal
392254156Female Barrel 5.5*2.1*9.5mm With internal Spring Clip And Locking Notch or Equal
179826156Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
1751551564 Pin Kycon Locking Plug or Equal
1750151564 Pin Kycon Locking Plug or Equal
180601165.625Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
175140175.29Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
184449185Female Barrel 5.5 * 2.5 * 10mm No internal Spring Clip nor Locking Notch or Equal
181915194.734 PIN LOCKING CONNECTOR, KYCON KPPX-4P OR EQUIVALENT
169787194.733 Pin Kycon KPPX-3P Snap and Lock DC Power Connector or Equal
215841194.73Female Barrel 5.5*2.5*9.5mm with internal Spring Clip and Locking Notch or Equal
205380194.73Female Barrel 5.5*2.5*9.5mm with internal Spring Clip and Locking Notch or Equal
240937204.50Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
213816243.754 Pin Kycon Locking Plug or Equal
174960243.754 Pin 180 degree DIN Plug or Equal
171336243.75Female Barrel 5.5*2.5*11mm, Right Angle without internal Spring Clip & Locking Notch or Equal
235138243.75MOLEX 2 POS 3.96mm HOUSING 121590502 with MOLEX TERMINALS 1721601806 or equivalent
195849243.75Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
219147243.754 Pin Kycon Locking Plug or Equal
199845243.75Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
171801263.46Female Barrel 5.5*2.5*11mm, Right Angle without internal Spring Clip & Locking Notch or Equal
197673283.214Hirose RP34-8SP-3SC(71)
20854437.52.4Female Barrel 5.5*2.5*11mm, Right Angle with Spring Clip & Locking Notch or Equal
240938481.875Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
News Releases
TitleWeb Link
CB-CERT-GTM41133-T2 -T3A -F IEC 60950-1_2005 2nd Editon + A1 and EN 60950-1_2006+A11+A1+A12 CB-REPORT-GTM41133-T2 -T3A -F IEC 60950-1_2005 2nd Editon + A1_2009 and EN 60950-1_2006 + A11_2009 + A1_2010 + A12_2011
ETL-CERT-GTM41133-F UL 60950-1 2007_03_27 Ed 2 Rev 2011_12_19 + CAN_CSA C22.2 2007_03_27 Ed 2 R2012 Rev 2011_12_19 ETL-CERT-GTM41133-T2 -T3A UL 60950-1 2007_03_27 Ed 2 Rev 2011_12_19 + CAN_CSA C22.2 2007_03_27 Ed 2 R2012 Rev 2011_12_19
S-MARK-CERT-GTM41133-T2 -T3A -F EN60950-1_2006 + A11_2009 + A1_2010 + A12_2011
CB-CERT-GTM41133-T2 -T3A -F 3rd Edition 2xMOPP with RM IEC 60601-1_2005 and C1+C2 IEC 60601-1-11_2010 CB-REPORT-GTM41133-T2 -T3A -F 3rd Edition 2xMOPP with RM IEC 60601-1_2005 + Corr1(2006 )+ Corr 2(2007) and EN 60601-1_2006 + A11_2011
S-MARK-CERT-GTM41133-T2 -T3A -F EN60601-1_2006 + A11_2011 + EN60601-1-11_2010
ETL-CERT and REPORT -GTM41133-T2 -T3A -F 2xMOPP ANSI_AAMI ES606001-1 2006-03-09-2005 + CAN_CSA-C22.2 60601-1 2008-02-01 and ANSI_AAMIHA60601-1-11

Request Info