Ruggedized DC/DC converter, 9-60VDC Input and 60W/13.2VDC output. Alternate output voltages available. IEC 60068 Vibration, Shock, Bump, and Salt Mist tested

Request Information Download PDF Configure Output Connector

Information

Model Number

GTD93035L6013.2-F

Description

GTD93035L6013.2-F, ITE Power Supply, Desktop/External, DC-DC, , Input Rating: 9-60 VDC, 3 Positon Terminal Block, Output Rating: 60 Watts, Power rating with convection cooling (W) , 13.2V in 0.1V increments, Approvals: IRAM; WEEE; VCCI; Ukraine; EAC; S-Mark 60950; CE; FCC; IP54; Salt Mist; Vibration Shock Bump; Saudi; South Africa; cETLus; AS/NZS; RCM; SGS (Brazil); CU Kazakhstan; NOM; CCC; South Africa; Malaysia; CB 60950;

Agency Documents

http://www.globtek.info/certs/GTD93035/

CE EC-Declaration for Medical

Contact GlobTek for more information

CE EC-Declaration for Industrial/Commercial/ITE

https://globtek.secure.force.com/models/ec_declaration?id=a0Oa000000C2WkZEAV

CE EC-Declaration for Household

Contact GlobTek for more information

RoHS/RoHS3 Declaration

https://www.globtek.com/pdf/rohs_cert/a0Oa000000C2WkZEAV

REACH Declaration

https://www.globtek.com/pdf/iso_certificates/REACH.pdf

Conflict Minerals Declaration

https://www.globtek.com/pdf/conflict-minerals.pdf

Model Parameters

Type

Desktop/External

Technology

DC-DC

Category

ITE Power Supply

Input Voltage Range (V)

9-60 VDC

Max Input Current (A)

9.0 A

Max Output Power Rating (W)

Output Voltage Range (V)

13.2

Efficiency

N/A

Ingress Protection

Size (mm)

180*95*63

Enclosure

Rating Table

Model Number (Final ordering #/Part No to be defined)	Voltage	Amps (A)	Watts (W)	RFQ
GTD93035L6013.2-F*	13.2	4.5	59.4

* (Final ordering #/Part No to be defined)

Specifications

A) ELECTRICAL SPECIFICATIONS:
1. Input Voltage: 9-60 Vdc
2. Output Regulation: +/- 1% measured at the output connector
3. Line Voltage Regulation: +/- 1% typical measured at full load
4. Output Ripple (Vp-p): 132mV maximum, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
5. Turn-ON/OFF Overshoot: 5% maximum, 500uS typical recovery time for 25% to 50% step load
6. Turn-ON Delay: 3 Seconds, maximum @ full load, nominal line
7. Hold-Up Time: 5mS typical @ nominal input voltage and full load
8. Inrush Current: 60A maximum cold start @ 9Vdc input
9. Switching Frequency: 150 KHz typical
10. Efficiency: >75% at 9Vdc full load
>78% at 12Vdc full load
>80% at 12Vdc-60Vdc full load

11. Transient Response: 200uS to +/-1.5% max value @ 25% load step

B) PROTECTION
1. Over-Voltage: Protected latch type, input recycling required to recover
2. Short Circuit: Hiccup with auto recovery
3. Over-load: Hiccup with auto recovery
4. Input Protection: Input line and neutral fusing
5. Reverse Polarity Protection: Yes

C) SAFETY
1. Dielectric Withstand Voltage: 1600 Vdc from primary to secondary, primary to chassis, secondary to chassis

D) OTHER:
1. MTBF: 200,000 Hours @ 25°C ambient temperature
2. Operating Temperature: -30°C to 50°C ambient temperature
3. Humidity: 5% to 85% relative humidity
4. Storage Temperature: -40°C to 85°C
5. Cooling: Convection

E) ENCLOSURE
1. Housing: Rugged, vehicle mounted. Vibration, shock, contamination, water resistant. Aluminum
2. Size: 189*95*53mm
3. Markings: Label
4. Vibration: IEC 60068-2-64 Fh (Random)
5. Bump: IEC 60068-2-29 Eb
6. Waterproof: Not required. However, it should be water-resistant. Recommended IEC 60068-2-52
7. Contamination: Resistant to chemicals, rust, etc.

Derating Curve

Qty (ea.)/Carton

Individual Box/Gift Box Size (mm)

117*74*204

Individual Box/Gift Box Color

White

Master Carton Size (mm)

430 x 370 x 190

Gross Weight (kg)

15.2

Label Width (mm)

49.0

Label Height (mm)

28.0

Input Configuration

Description

3 Positon Terminal BlockShanghai Elinker P/N: LG103-5.0

Output Configuration

Common output connector options:
Click to add to your request.


L Type (Coaxial 5.5x2.5mm plug)	C Type (Coaxial 5.5x2.1mm plug)	K Type (Coaxial 3.5x1.3mm plug)	LL Type (5.5x2.5mm Locking 760k type)	CL Type (5.5x2.1mm Locking S761k type)	Magnetic Connector

YL3 Type (KPPX-3P)	YL4 Type (KPPX-4P)	EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)	MSB Type (Micro USB)	Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals

Logo	Description
No Logo Applicable	AS/NZS 60950.1:2011
No Logo	CB Certificate IEC 60950-1:2005 2nd Edition + A1:2009 +A2:2013 Report to EN 60950-1:2006 +A11:2009 +A1:2010 + A12:2011 +A2:2013 For 5V-24V only
	CCC to GB4943.1-2011 GB9254-2008 GB17625.1-2012 with Tropical and Altitude above 2000m approval
	CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
	cETLus-Cert-60950-1 4007497 Listed
адаптер питания	CU Kazakhstan Certificate
	Certification # TC RU AR46.B.75423 Custom Union of Russia, Belarus and Kazakhstan
	FCC PART 15 CLASS B
IP54	Ingress Protection: ?IP54 to IEC60529:2001 Protected against dust - limited ingress (no harmful deposit) and Protected against sprays from all directions - limited ingress permitted
PRECAUCION: PARA USO EN EQUIPOS ELECTRONICOS SOLAMENTE	IRAM certificate DC-E-G71-003.1 to IEC 60950 + A1:2009
No Logo	Malaysia ST Release Letter GTD93035L6013.2-F GTD93035H6013.2-F IEC60950-1:2005 (ED.2) + A1:2009 No logo
Fuente de alimentación de ITE	NOM (Mexico) to NOM-001-SCFI-1993
	RCM N136; Australia and New Zealand Regulatory Compliance, Mark (http://rcm.standards.org.au/rcmfaq/rcmfaq.htm
	S-Mark Certificate EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 +A2:2013 (http://www.intertek.com/marks/s/)
No LOGO	Salt Mist to IEC 60068-2-52 Environmental testing Part 2: Tests- Test Kb: Salt mist, cyclic (sodium chloride solution)
	Saudi Arabia approval to IEC 60950
FONTE DE ALIMENTAÇÃO DE ITE	SGS (Brazil) to IEC 60950-1_2005 + A1_2009 (13.2 Volts)
No Logo	South Africa EMI and EMC approval to CISPR 22 Class B CISPR 24
No Logo	South Africa approval to SANS IEC 60950
	Ukraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
	Japan: Voluntary Control Council for Interference (VCCI)
No LOGO	Viration, Shock, Bump to IEC 60068-2-6:2007 -2-64:2008 -2-27:2008 -2-29 ed 2.0 Environmental testing Part 2 Tests
	WEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case