Request Information Download PDF Configure Output Connector
GT-41062-WWVV-T3 GT-41062-WWVV-T3
Information
Model NumberGT-41062-WWVV-T3
DescriptionGT-41062-WWVV-T3, ITE Power Supply, Desktop/External, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, IEC 60320/C14 AC Inlet Connector, Class I, Earth Ground, Output Rating: 18 Watts, 5-24V in 0.1V increments, Approvals: C-Tick CB CCC CE GOST-R WEEE Ukraine IP40 Korea (12V Only) Korea (24V Only) NrCAN SIQ cUL VCCI Class I RoHS 2 China RoHS LPS Level IV PSE Korea (9V Only) Korea (15V Only) Level V PSE PSE IRAM
Agency Documentshttp://www.globtek.info/certs/GT-41062-T2-T3-T3A/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0O30000007P7Z3EAK
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0O30000007P7Z3EAK
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeDesktop/External
TechnologyRegulated Switchmode AC-DC
CategoryITE Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.6A
Wattage (W)18
Vout Range (V)5-24
EfficiencyIV
Ingress Protection
Size (mm)80.6*50.0*31.0
EnclosureUser-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-41062-1805-T3 53.618 RFQ
GT-41062-1806-T3 6318 RFQ
GT-41062-1807-T3 72.5717.99 RFQ
GT-41062-1809-T3 9218 RFQ
GT-41062-0909-T3 919 RFQ
GT-41062-1812-T3 121.518 RFQ
GT-41062-1815-T3 151.218 RFQ
GT-41062-1818-T3 18118 RFQ
GT-41062-1820-T3 200.918 RFQ
GT-41062-1824-T3 240.7518 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
1. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
2. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
3. Output Power (Rated): 18Watts max
4. Output Regulation: +/- 5% measured at the output connector
5. Line Voltage Regulation: +/- 1% typical measures at full load
6. Output Ripple (Vp-p): 1% or 150 mV whichever is greater measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of output connector at nominal line
7. Turn-On/Turn-Off Overshoot: 5% maximum, 1mS typical recovery time for 25% step load
8. Turn-On Delay: 1 second typical
09. Hold-Up Time: 8mS typical @ nominal input voltage & full load
10. Inrush Current: 30A typical @ 115Vac input ; 60A typical @ 230Vac input
11. Switching Frequency: 65 KHz typical

B) PROTECTION
1. Over-Voltage: Protected via zener diode across the output
2. Short Circuit: Electronically Protected, unit will recover upon removal of fault
3. Input Protection: Input line fusing

C) SAFETY
1. Dielectric Withstand Voltage: 4242Vdc from primary to secondary
2. Touch Current: <0.25mA @ 240Vac input voltage
3. Earth Leakage Current: <3.5mA @ 240Vac input voltage
4. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006
4. Earth continuity test:<0.1 Ohm or < 0.2 Ohm when with a non-detachable Power Supply cord, Class I Only


D) OTHER:
1. MTBF: 200,000 hours @ 25°C ambient temperature
2. Operating Temperature: 0°C to 40°C ambient temperature
3. Humidity: 0% to 90% relative humidity
4. Storage Temperature: -10°C to 80°C

E) ENCLOSURE
1. Upper Housing: High impact plastic, 94V0 polycarbonate, non-vented
2. Lower Housing: High impact plastic, 94V0 polycarbonate, non-vented
3. Size: 80.5* 50.0*31.0 mm +/-1.0
Derating Curve
Qty (ea.)/Carton80
Individual Box/Gift Box Size (mm)57*110*70
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)450 x 295 x 285
Gross Weight (kg)15.6
Label Width (mm)39.6
Label Height (mm)59.6
Input Configuration
DescriptionIEC 60320/C14 AC Inlet Connector, Class I, Earth GroundUser-added image
Mates with IEC 60320/C13 Plug

Optional Locking IEC60320 Receptable and cord option available on some models by request.:
User-added image

Standard International IEC 320/C13 Cordsets

Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or packaged with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.

 

Stock Power Supply Cords

Part Number/ Link

Country

Plug

Termination

Length (mm)

(Ft)

3 Conductors (Grounded) IEC 320/C13

3021457F701(R)

N. American

NEMA 5-15P

IEC 320/C13

2150

7

1191068F0701(R)

N. American

NEMA 5-15P Hospital

IEC 320/C13

2459

8

2194272M5701-T(R)

Argentina

IRAM 2073

IEC 320/C13

2500

8

5502022M5701A(R)

Australian

AS3112 / 3 PRONG

IEC 320/C13

2500

8

204B4272M5701(R)

Brazil

BRAZILIAN; WS-002

IEC 320/C13

2500

8

6023602M5701(R)

China

CCC GR2099

IEC 320/C13

2500

8

G8014272M5701(R)

Danish

AFSNIT SECTION 107-2-D1

IEC 320/C13

2500

8

23144272M5701-T(R)

Europe

CEE 7/7

IEC 320/C13

2500

8

20842710M701(R)

India

India IS 1293 (also known as IA16A3 or BS546)

IEC 320/C13

2500

8

377C4272M5701(R)

Israel

ISL 377C

IEC 320/C13

2500

8

23024272M5701(R)

Italy

CEI 23-16/VII

IEC 320/C13

2500

8

3003339F701(R) [3x1.25mm2]

3003068F2701-HK(R) [3 x 2.0mm2]

Japan

JIS 8303 / 3 PINS

IEC 320/C13

2500

8

2313K3432M5701(R)

Korea

KS C 8305

IEC 320/C13

2500

8

23144272M5701-T(R) [Same as Europe Above]

Russia

GOST 7396

IEC 320/C13

2500

8

2084272M5701(R)

S. Africa

S. African

IEC 320/C13

2500

8

23214272M5701(R)

Switzerland

SEV 1011 ( EL 203)

IEC 320/C13

2500

8

3003322M5701(R)

Taiwan

BSMI

IEC 320/C13

2500

8

PZ0800100-2M5BK13H(R

UK

BS 1363A

IEC 320/C13

2500

8

7055002M5701A(R)

International

IEC 320 C14-C13

IEC 320/C13

2500

8

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
C-Tick GT-41062 N4292 SAA111044EA
C-Tick GT-41062 N4292 SAA111044EA
No Logo CB Certificate IEC 60950-1:2005 (2nd Edition), Am 1: 2009, CB report IEC 60950-1:2005 (2nd Edition), Am 1: 2009 and EN 60950-1:2006 + Am 1:2010 + Am 11:2009 + Am 12:2011
User-added imageCCC to GB4943.1-2011 GB9254-2008 GB17625.1-2012, Tropical <2000
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
Class I Earth Ground
User-added image
 
UL60950-1, cULus to UL 60950-1, 1st Edition, 2007-10-31 and CSA C22.2 No. 60950-1-03, 1st Edition, 2006-07
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP40Ingress Protection: IP40 to IEC60529:2001 Protection against granular foreign bodies
User-added imageIRAM certificate DC-E-G71-001.1 to IEC 60950 + A1:2009
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50314327, to J60950-1(H26) , J55022(H22),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50314327, to J60950-1(H26) , J55022(H22),J3000(H25)[DC15≤30V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added image

Korea KET KC Mark GT-41062-1809-T3 HU10499-9002A (9V Only)
User-added image
Korea KET KC Mark GT-41062-1812-T3 HU10499-9002A (12V Only)
User-added image
Korea KET KC Mark GT-41062-1815-T3 HU10499-9002A (15V Only)
User-added image

Korea KET KC Mark GT-41062-1824-T3 HU10499-9001A (24V Only)
User-added imageEfficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)... NOTE: 24V & 1830 mm 18 - 20awg o/p cord only
LPSLimited Power Source
User-added imageEEV1191Natural Resources Canada (NRCan): CSA Standard C381.1-08, QSP NRCAN EEV1191; http://shop.csa.ca/en/canada/energy-efficiency/cancsa-c3811-08/invt/27024802008
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added image
IEC/EN60950-1
SIQ Mark License Certificate EN 60950-1:2006 + Am 1:2010+ Am 11:2009 + Am 12:2011
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
101045121.5Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
186050121.5Power connector 5.5x2.5x11mm with 4.0mm thumb screw
186048121.5Power connector 5.5x2.5x11mm with 4.0mm thumb screw
198361121.5Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
136278121.5Socket for interchangeable o/p connectors
136275121.5Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
136272121.5Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
128232121.5Female Barrel 5.5 * 2.1 * 13.8mm w/ 6.5mm Thumb Screw or Equal
124166121.5Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
129264151.2Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
136370151.2Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
100411151.20Female Barrel 5.5*2.5*9.5mm with internal Spring Clip and Locking Notch or Equal
107537151.2Split 30mm +/-10mm; Strip and Tin 6.0mm maximum
136514240.75Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
144065240.75Female Barrel 5.5*2.5*9.5mm No internal Spring Clip nor Locking Notch or Equal
184110240.75Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
237238240.75Right angle Female Barrel 5.5 * 2.1 * 13.8mm w/ 6.5mm Thumb Screw or Equal
136519240.75Socket for interchangeable o/p connectors
216794240.755-Pin screw type Terminal Block, black, P/N AKL 313-05 or equal
124163240.75Stripped 25 +/-1mm; Tinned 9 +/- 1mm or Equal
16679553.6Female Barrel 5.5*2.5*11mm, Right Angle without internal Spring Clip & Locking Notch or Equal
17526353.6Power connector 5.5x2.1x13.8mm with 6.5mm thumb screw
12919353.6Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
12919453.6Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
13616553.6Female Barrel 5.5*2.5*11mm, Right Angle with Spring Clip & Locking Notch or Equal
12919553.6Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
12919753.65 Pin 180° Male DIN Plug or Equal
39754391Socket for interchangeable o/p connectors
12418992Female Barrel 5.5*2.5*9.5mm with internal Spring Clip and Locking Notch or Equal

Request Info

Text us your inquiry