2000W Battery Charger for Lead-acid/ Ultra-capacitor/Li-Ion/LiFePO4 Battery Types

Request Information Download PDF

2000W Battery Charger for Lead-acid/ Ultra-capacitor/Li-Ion/LiFePO4 Battery Types

GT-A2000-SVVVXXX Image

Model Image

GT-A2000 is a single phase 2000W intelligent battery charger featuring an LED indicator for power loading and charger status. The charger is a single output employing an advanced microprocessor-controlled power management system to control the two stage battery charging technique as well as other functionality such as OCP and the CANBUS/RS485/RS422 interface

Information

Model Number

GT-A2000-SVVVXXX

Description

GT-A2000 is a single phase 2000W intelligent battery charger featuring an LED indicator for power loading and charger status. The charger is a single output employing an advanced microprocessor-controlled power management system to control the two stage battery charging technique as well as other functionality such as OCP and the CANBUS/RS485/RS422 interface

Agency Documents

CE EC-Declaration for Medical

Contact GlobTek for more information

CE EC-Declaration for Industrial/Commercial/ITE

https://globtek.secure.force.com/models/ec_declaration?id=a0Oa000000Mgu6GEAR

CE EC-Declaration for Household

Contact GlobTek for more information

UKCA-Declaration for Medical

Contact GlobTek for more information

UKCA-Declaration for Industrial/Commercial/ITE

https://globtek.secure.force.com/models/ukca_declaration?id=a0Oa000000Mgu6GEAR

UKCA-Declaration for Household

Contact GlobTek for more information

Morocco SDoC Declaration

https://globtek.secure.force.com/models/Morocco_SDoC_Declaration?id=a0Oa000000Mgu6GEAR

RoHS/RoHS3 Declaration

https://www.globtek.com/pdf/rohs_cert/a0Oa000000Mgu6GEAR

REACH Declaration

https://www.globtek.com/pdf/iso_certificates/REACH.pdf

Conflict Minerals Declaration

https://www.globtek.com/pdf/conflict-minerals.pdf

Model Parameters

Type

Enclosed-Metal

Technology

Li-Ion Battery Charger

Category

ITE Power Supply

Input Voltage Range (V)

90-264Vac (47 – 63Hz)

Max Input Current (A)

14.8A Typ.@115Vac

Max Output Power Rating (W)

2000

Output Voltage Range (V)

54.0-82.8

Efficiency

Ingress Protection

Size (mm)

350*70*184

Enclosure

DC Output Receptical (P2) & Pin Assignment AC Input Recepticle (P1) & Pin Assignment
User-added image

Rating Table

Model Number (Final ordering #/Part No to be defined)	Voltage	Amps (A)	Watts (W)
GT-A2000-S540370*	54	37	1998
GT-A2000-S584343*	58.4	34.3	2003.12
GT-A2000-S828242*	82.3	24.2	1991.66

* (Final ordering #/Part No to be defined)

Specifications

Features:
Constant Voltage / Constant Current Charge Mode
Lead-acid/ Ultra-capacitor/Li-Ion/LiFePO4 Battery Types
CANBus/ RS485 / RS422 Interface
Optional Remote on/off and Current Sharing

Input Specifications
IInput Voltage 90-264Vac (See de-rating chart) (250 – 375VDC contact Globtek)
Fuse Internal Line and Neutral
Frequency 47-63Hz
Inrush current 40A (peak @ 230Vac)
Input current 14.8A typ. @ 115Vac / 9.6A typ. @ 230Vac
No-Load Power 15.1 Watt @ 115Vac / 13.3 Watt @ 230Vac
Efficiency 88.5% typ. @ full load @ 230Vac
Power Factor 0.98 typ. (meets EN61000-3-2)
Conducted EMI CISPR EN55022A
Radiated EMI CISPR EN55014-1
Harmonic distortion Meets IEC 61000-3-2
Isolation Meets IEC 60950-1
Leakage current 0.82mA typ. @ 230Vac
Hold-up Time typ. 25mS @ 115Vac / 20mS @ 230Vac
Remote ON/OFF Available (Contact Globtek)
Thermal Protection NTC/thermostat and Temperature sensor
MTBF 100,000 hours (MIL-HDBK-217F @ 25°C)

Output Specifications
Number of Outputs One
Normal Output Voltage See Rating Chart
Normal Output Current See Rating Chart
Output Power 2000 Watts
Line Regulation typ. ± 5%
Noise & Ripple typ. 1% pk-pk – bandwidth limited to 20MHz
Over Voltage Protection (OVP) Built In
Over Current Protection (OCP) Programmable
Over Load Protection (OLP) fully protected
Current Sharing Available (Master slave with system rack) (contact Globtek)
Reverse Polarity Protection Available (Contact Globtek)
Switching Frequency 55KHz
Charging LED Indicator Solid RED = Fail / GREEN / RED = Charging / Solid GREEN = Battery charged

Environmental Specification
Storage Temperature -40°C to +85°C
Operating Temperature -20°C to +60°C (See de-rating chart)
Cooling Internal fan with intelligent speed control
Audible noise 47.0db max
Humidity 20 to 90% non-condensing
Shock/Vibration 5Grms, 1 Hour, Six Degree-of-freedom random
Surge Immunity EN-6000-4-5 (Differential ±1KV Level 3) (Common mode ±2KV Level 3)
ESD Immunity EN-61000-4-2 (4KV Contact Level 2) (8KV Air Discharge Level 3)
Altitude 2000 Meters

Safety @ Regulatory
IEC 60950-1 / EN 60335-1 / EN60335-2-29 Class 1
Conducted EMI CISPR EN55022A
Radiated EMI CISPR EN55014-1
Harmonic distortion Meets IEC 61000-3-2

Enclosure
Enclosed Metal
Size: 350*184*70 mm
Weight: 4.2kgs
Markings: Label and/or Pad Printed and/or Molded in the case

Derating Curve

Simplified block diagram
User-added image

Qty (ea.)/Carton

Individual Box/Gift Box Size (mm)

Individual Box/Gift Box Color

Master Carton Size (mm)

TBD

Gross Weight (kg)

Label Width (mm)

Label Height (mm)

Input Configuration

Description

3 prong LT-262B or YP16L 20A/250V

Connector Standard NEMA 6-20P up angle 3P plug

Maximum Current rating 20A

Maximum Voltage 250V

Number of Poles and Wires 2 poles, 3 wires

Available Wire Thickness 12 through 18AWG

Outer Mold Material 35P PVC

Blade Material Nickel coated Brass

Flamability Rating UL 94V-0

color black is standard but any color available

Approvals

Logo	Description
	CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
	WEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case