Request Information Download PDF
GT-G3064P1000VV-X.X-C GT-G3064P1000VV-X.X-C
Model NumberGT-G3064P1000VV-X.X-C
DescriptionGT-G3064P1000VV-X.X-C, ITE Power Supply, Enclosed-Metal, Single Output Power supply, , Input Rating: 90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz), 3 Positon Terminal Block, Output Rating: 1000 Watts, 12-48V in 0.1V increments, Approvals: CE GOST-R Ukraine WEEE China RoHS Class I cUL PSE VCCI RoHS 2
Agency Documents
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITE
RoHS/RoHS2 Declaration
REACH Declaration
Conflict Minerals Declaration
Model Parameters
TechnologySingle Output Power supply
CategoryITE Power Supply
Input Voltage90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz)
I/P Amps (A)12A / 115VAC, 5A / 230VAC
Wattage (W)1000
Vout Range (V)12-48
Ingress ProtectionIPX0
Size (mm)127x40.9x283
EnclosureUser-added image
User-added image
User-added image
User-added image
User-added image
User-added image
User-added image
User-added image
User-added image
User-added image

Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-G3064P100012 1262744 RFQ
GT-G3064P100015 1550750 RFQ
GT-G3064P100024 2440960 RFQ
GT-G3064P100027 2737999 RFQ
GT-G3064P100048 48211008 RFQ
Universal AC input / Full range
Programmable output Voltage (30% ~ 105%)
Programmable output Current (40% ~ 105%)
+5V / 0.5A auxiliary output
1U profile, High power density 11.1W / in³
Forced current sharing at parallel operation
Power OK signal
Remote ON / OFF, Remote sense function
Protection: OVP, OLP, OTP, SCP, Fan failure

DC Voltage Range: 12V, 15V, 24V, 27V, 48V
Rated Current: 62A, 50A, 40A, 37A, 21A
Current Range: 0~ 62A 0 ~ 50A 0 ~ 40A 0 ~ 37A 0 ~ 21A
Rated Power 744W: 750W 960W 999W 1008W
Ripple & Noise (Max.): Note.2 5 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p
Voltage Adj. Range : ±5.0% Typical adjustment by potentiometer. (VR1)
Voltage Tolerance: ±1.0%
Line Regulation: ±0.5%
Load Regulation: ±0.5%
Setup, Rise Time: 800ms, 60ms at full load
Hold Up Time (Typ.): 16ms / 230VAC at full load

Voltage Range: 90 ~ 264VAC, 127 ~ 370VDC
Frequency Range: 47 ~ 63Hz
Power Factor (Typ.): 0.98 / 230VAC, 0.99 / 115VAC at full load
Efficiency (Typ.): 87% 88% 89% 89% 90%
AC Current (Typ.): 12A / 115VAC, 5A / 230VAC
Inrush Current (Typ.): 27A / 115VAC, 54A / 230VAC
Leakage Current: < 1.0mA / 240VAC

Over Load: 105% rated output power, Protection type: Constant current limit
Over Voltage: Variable OVP, 125 ± 10% Vout. Refer to VCI VS OVP curve. Protection type: Latch-style (Recovery after reset AC power ON or inhibit)
Over Temperature: By detecting primary and secondary heat sink.
Protection type: Shut down o/p voltage (Auto recovers automatically after temperature goes down)

Auxiliary Power: 5V / 0.5A (±3%)
Remote ON / OFF Contro:l External switch or NPN Transistor to turn ON / OFF
Power OK Signal: Open drain signal low when PSU turns on, Max. sink current: 20mA, Max. drain voltage: 40V.
Output Voltage Trim: Adjustment of output voltage is between 30 ~ 100% of rated output
Output Current Trim: Adjustment of output current is between 40 ~ 105% of rated output
Parallel (Current Sharing) Note.5 Please refer to function

Working Temp.: -25 ~ +60°C (Refer to output load de-rating curve)
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp. & Humidity: -40 ~ +85°C, 10 ~ 95% RH
Temp. Coefficient: ±0.02% / °C (0 ~ 50°C)
Vibration: 10 ~ 500Hz, 5G 10min. / 1cycle, period for 60min. each along X, Y, Z axes Compliance to IEC 68-2-6, IEC 68-2-64

Safety & EMC
Safety Standards: Certified UL 60950-1; EN 60950-1
Withstand Voltage: I/P-O/P: 3KVAC (4242VDC), I/P-FG: 1.5KVAC (2121VDC), O/P-FG: 0.5KVAC (707VDC). This test is done without enclosure.
Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC
EMI Conduction & Radiation: Certified EN 55022; EN 61204-3; EN 61000-6-3
Harmonic Current: Certified EN 61000-3-2; EN 61000-3-3
EMS Immunity: Certified EN 55024; EN6 1204-3; EN6 1000-6-1; IEC 61000-4-2, 3, 4, 5, 6, 8, 11

MTBF: 142.8K HRS Certified MIL-HDBK-217F
Cooling: Load and temperature control fan
Dimension: (WxHxD): 127x40.9x283 mm / 5.000x1.610x11.142 inch
Packing: 2.1kg; 9pcs / 19.9kg / 1.86CUFT
Derating CurveUser-added image

Qty (ea.)/Carton9
Individual Box/Gift Box Size (mm)290*43*130
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)TBD
Gross Weight (kg)19.9
Label Width (mm)110.0
Label Height (mm)30.0
Input Configuration
Description3 Positon Terminal BlockShanghai Elinker P/N: LG103-5.0
User-added imageAttention Mark / Refer to operating manual for operating and service instructions
User-added image  CE Certification
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart:
User-added image
Class I Earth Ground
User-added imageUL60950-1, cULus to UL 60950-1 E170507
User-added image
GOST-R mark for Russia(Document: 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan:
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006
User-added imageUkraine UKRSepro (Document:
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU ( Mark is on the label or Molded in the case

Request Info

Text us your inquiry