Request Information Download PDF
GT-G3068P650VV-X.X-C GT-G3068P650VV-X.X-C
Model NumberGT-G3068P650VV-X.X-C
DescriptionGT-G3068P650VV-X.X-C, ITE Power Supply, Enclosed-Metal, Single Output Power supply, , Input Rating: 90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz), 3 Positon Terminal Block, Output Rating: 650 Watts, 5-48V in 0.1V increments, Approvals: CE China RoHS Class I cUL RoHS 2 Ukraine VCCI WEEE
Agency Documents
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITE
RoHS/RoHS2 Declaration
REACH Declaration
Conflict Minerals Declaration
Model Parameters
TechnologySingle Output Power supply
CategoryITE Power Supply
Input Voltage90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz)
I/P Amps (A)7.5A / 115VAC, 3.5A / 230VAC
Wattage (W)650
Vout Range (V)5-48
Ingress ProtectionIPX0
Size (mm)127x40.9x249
EnclosureUser-added image
User-added image
User-added imageUser-added image
User-added image
User-added image
User-added image
User-added image
User-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-G3068P65005 5100500 RFQ
GT-G3068P60012 1250600 RFQ
GT-G3068P65015 1540600 RFQ
GT-G3068P65024 2427648 RFQ
GT-G3068P65027 2724648 RFQ
GT-G3068P65048 4813.6652.8 RFQ
Universal AC input / Full range Programmable output Voltage (30% ~ 105%) Programmable output Current (40% ~ 105%)
+5V / 0.5A auxiliary output
Forced current sharing at parallel operation
Power OK signal
Remote ON / OFF, Remote sense function
Protection: OVP, OLP, OTP, SCP, Fan failure
3 years warranty

DC Voltage Range: 5V 12V 15V 24V 27V 48V
Rated Current: 100A 50A 40A 27A 24A 13.6A
Current Range: 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A
Rated Power: 500W 600W 600W 648W 648W 652W
Ripple & Noise (Max.): Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p
Voltage Adj. Range: ±5.0% Typical adjustment by potentiometer
Voltage Tolerance: Note.3 ±1.0%
Line Regulation: ±0.5%
Load Regulation: ±0.5%
Setup, Rise Time: 800ms, 60ms at full load
Hold Up Time (Typ.): 16ms / 230VAC at full load
Voltage Range: Note.4 90 ~ 264VAC, 127 ~ 370VDC
Frequency Range: 47 ~ 63Hz
Power Factor (Typ.): 0.98 / 230VAC, 0.99 / 115VAC at full load
Efficiency (Typ.): 83% 88% 88% 90% 90% 91%
AC Current (Typ.): 7.5A / 115VAC, 3.5A / 230VAC
Inrush Current (Typ.): 27A / 115VAC, 54A / 230VAC
Leakage Current: < 1.0mA / 240VAC

Over Load: 105 ~ 125% rated output power, Protection type: Total Power limit, Latch-style (Recovery after reset AC power ON or inhibit)
Over Voltage:
Variable OVP, 125 ±10% Vout, Protection type: Latch-style (Recovery after reset AC power ON or inhibit)
Over Temperature: By detecting primary and secondary heat sink.
Protection type: Shut down o/p voltage (Auto recovers automatically after temperature goes down)

Auxiliary Power: 5V / 0.5A (±3%)
Remote ON / OFF Control: External switch or NPN Transistor to turn ON / OFF
Power OK Signal: Open drain signal low when PSU turns on, Max. sink current: 20mA, Max. drain voltage: 40V.
Output Voltage Trim :Adjustment of output voltage is between 30 ~ 105% of rated output
Output Current Trim :Adjustment of output voltage is between 40 ~ 105% of rated output
Parallel (Current Sharing) Please refer to Function Manual

Working Temp.: -20 ~ +60°C (Refer to output load de-rating curve)
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp. & Humidity: -40 ~ +85°C, 10 ~ 95% RH
Temp. Coefficient: ±0.02% / °C (0 ~ 50°C)
Vibration: 10 ~ 500Hz, 5G 10min. / 1cycle, period for 60min. each along X, Y, Z axes Compliance to IEC 68-2-6, IEC 68-2-64

Safety & EMC
Safety Standards: Certified UL 60950-1; EN 60950-1
Withstand Voltage: I/P-O/P: 3KVAC (4242VDC), I/P-FG: 1.5KVAC (2121VDC), O/P-FG: 0.5KVAC (707VDC), 1min
Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC
EMI Conduction & Radiation: Certified EN 55022
Harmonic Current: Certified Certified EN 55022; EN 61000-6-3
EMS Immunity :Certified EN 61204-3; EN 55024; EN 61000-6-1, IEC 61000-4-2, 3, 4, 5, 6, 8, 11

MTBF: 166.2K HRS Certified MIL-HDBK-217F
Cooling: Load and temperature control fan
Dimension (WxHxH): 127x40.9x249 mm / 5.000x1.610x9.803 inch
Packing: 1.68kg; 9pcs / 16.1kg / 1.86CUFT

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.
3. Tolerance: includes setup time tolerance, line regulation and load regulation.
4. De-rating may apply in low input voltage. Please check the de-rating curve for more details.
5. In parallel connection, only one unit will operate if the total output load is less than 5% of the rated load condition.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
Derating CurveUser-added image
Qty (ea.)/Carton9
Individual Box/Gift Box Size (mm)290*130*65
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)TBD
Gross Weight (kg)16.1
Label Width (mm)90.0
Label Height (mm)30.0
Input Configuration
Description3 Positon Terminal BlockShanghai Elinker P/N: LG103-5.0
User-added imageAttention Mark / Refer to operating manual for operating and service instructions
User-added image  CE Certification
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart:
User-added image
Class I Earth Ground
User-added imageUL60950-1, cULus to UL 60950-1 E170507
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006
User-added imageUkraine UKRSepro (Document:
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU ( Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
2295051250(1) Position Terminal Block
1970642427.08(1) Position Terminal Block

Request Info

Text us your inquiry