Regulated Switchmode AC-DC Power Supply AC Adaptor
Category
ITE Power Supply
Input Voltage Range (V)
100-240V~, 50-60 Hz
Max Input Current (A)
0.8A
Max Output Power Rating (W)
24
Output Voltage Range (V)
10-24
Efficiency
V
Ingress Protection
IP41
Size (mm)
50*81*31
Enclosure
Rating Table
Model Number (Final ordering #/Part No to be defined)
Voltage
Amps (A)
Watts (W)
RFQ
GT-41130-2016-11.0-W2*
5
3
15
GT-41130-2016-6.0-W2*
10
2
20
GT-41130-2016-4.0-W2*
12
2
24
GT-41130-2016-2.2-W2*
13.8
1.73
23.87
GT-41130-2016-1.0-W2*
15
1.6
24
GT-41130-2016-W2*
16
1.5
24
GT-41130-2024-6.0-W2*
18
1.33
23.94
GT-41130-2424-W2*
24
1
24
* (Final ordering #/Part No to be defined)
Specifications
A) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Ripple (Vp-p): +/-1% or 150 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
04. Turn-ON/OFF Overshoot: 5% maximum, 1 mS typical recovery time for 25% step load
05. Turn-ON Delay: 1 second, typical
06. Hold-Up Time: 8 mS typical at nominal input voltage and full load
07. Inrush Current: 30A typical at 115VAC input and 60A typical at 230VAC input
08. Switching Frequency: 65 KHz typical
B) PROTECTION
01. Over-Voltage: Protected Zener clamp across the output
02. Short Circuit: Protected unit will auto recover upon removal of fault
03. Input Protection: Input line fusing
C) SAFETY
01. Dielectric Withstand Voltage: 4242Vdc from primary to secondary
02. Touch Current: <0.25mA @ 240Vac input voltage
D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection
E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 47.6*82.7*37.7mm +/-1.0 mm
03. Markings: Label and/or Pad Printed and/or Molded in the case
Derating Curve
Qty (ea.)/Carton
80
Individual Box/Gift Box Size (mm)
103*38*75
Individual Box/Gift Box Color
White
Master Carton Size (mm)
435 x 395 x 178
Gross Weight (kg)
15.6
Label Width (mm)
29.5
Label Height (mm)
32.0
Input Configuration
Description
NEMA 1-15P, North America Blades, Class II 2 ConductorsAll NEMA 1 devices are two-wire non-grounding devices (hot-neutral) rated for 125 V maximum. NEMA 1-15P plugs have two parallel flat blades, 0.25 inches (6.35 mm) wide, 0.06 inches (1.524 mm) thick, 0.625-0.718 inches (15.875–18.256 mm) long, and spaced 0.5 inches (12.7 mm) apart.
Output Configuration
Common output connector options: Click to add to your request.
Contact GlobTek for your specific requirements or custom solutions.
Approvals
Logo
Description
No Logo
CB Certificate IEC 60950-1:2005 (2nd Edition), Am 1: 2009 + Am 2:2013
CHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
UL 60950-1, 2nd Edition, 2007-03-27 (Information Technology
Equipment - Safety - Part 1: General Requirements)
CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03for 10VDC,12VDC,15VDC,16VDC,24VDC
Certification # TC RU AR46.B.69004 Custom Union of Russia, Belarus and Kazakhstan
Indoor Use Only - Mark is on the label or Molded in the case
IP41
Ingress Protection: ?IP41 to IEC60529:2001 Protection against
granular foreign bodies - Protected against vertically falling drops of water
JAPAN TUV R-PSE, Cert. No. JD 50473430, to J62368-1(H30) , J55032(H29),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
JAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHS
Specifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
Japan: Voluntary Control Council for Interference (VCCI)
WEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm)
Mark is on the label or Molded in the case
Popular Products (Stock items)
SKU
Volts Out
Current Out (Amps)
Connector
RFQ
Sample Request
191632
5.0
3.0
Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
191630
5.0
3.0
Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
168186
10.0
2.0
Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
240710
12.0
2.0
Female Barrel 5.5 * 2.5 * 9.5mm with internal Spring Clip and Locking Notch or Equal
173248
12.0
2.0
RECPT 2POS HSNG WHITE 2.5mm JST PN: SYR-02TV; 2X Crimp 22-28 awg Pins JST PN: SYM-001T-P0.6(N) or Equivalent
175685
12.0
2.0
Female Barrel Right Angle, 5.5*2.1*11mm with NO internal Spring Clip NOR Locking Notch or Equal
228965
12.0
2.0
Female Barrel 5.5*2.1*12mm w/ Spring Clip & Locking Notch or Equal
164161
12.0
2.0
Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
137467
12.0
2.0
Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
167228
12.0
2.0
Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
346126
12.0
2.0
Female Barrel, Right Angle 3.5 * 1.35 * 9.5mm with internal Spring Clip and Locking Notch or Equal
180368
12.0
2.0
Stripped 50 +/-5mm; Tinned 9.5 +/- 2mm or Equal
180396
12.0
2.0
Stripped 50 +/-5mm; Tinned 9.5 +/- 2mm or Equal
190094
12.0
2.0
Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
190139
12.0
2.0
Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
215836
12.0
2.0
Female Barrel 5.5*2.5*11mm, Right Angle with Spring Clip & Locking Notch or Equal
161990
12.0
2.0
Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
182555
13.8
1.73
Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
173223
15.0
1.6
Micro-B USB 5 Pin Type "B" or Equal
171692
15.0
1.6
Micro-B USB 5 Pin Type "B" or Equal
161170
15.0
1.6
Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
173831
15.0
1.6
Micro-B USB 5 Pin Type "B" or Equal
171042
15.0
1.6
Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
184472
15.0
0.8
Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
137483
24.0
1.0
Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
How Does an AC-DC Adapter Work?
The AC to DC adapter or external power supply consists of a power supply which is enclosed in a housing similar to an AC plug, hence the term plug type, wall plug in, plug-in or plugtop power adapter. The power supply is plugged into the mains socket and the AC Voltage is then converted by the AC to DC adapter power supply into a DC voltage that is fed into the appliance via the output cable connection.
What is a Plug-in AC-DC Adapter?
Plug in AC-DC adapters are also known as AC Adaptors or AC-DC converters and are a type of external power supply. Some electrical appliances require power but lack the internal components to derive the required voltage and power from mains power. This is where an AC adapter is used to convert the AC current into DC voltage