World map English (US)

GT-83047-WWVV-X.X-W3Z Wall Plug-in ITE Power Supply Datasheet

Request Information Download PDF Configure Output Connector
Information
Model NumberGT-83047-WWVV-X.X-W3Z
DescriptionGT-83047-WWVV-X.X-W3Z, ITE Power Supply, Wall Plug-in, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, NEMA 1-15P, North America Blades, Class II 2 Conductors, Output Rating: 18 Watts, Power rating with convection cooling (W) , V in 0.1V increments, Approvals: WEEE; China RoHS; RoHS; LPS; Class I; Level V; PSE; Ukraine; GOST-R; CE;
Agency Documentshttp://www.globtek.info/certs/GT-83047
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttps://globtek.secure.force.com/models/ec_declaration?id=a0Oa000000JDMsdEAH
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for MedicalContact GlobTek for more information
UKCA-Declaration for Industrial/Commercial/ITEhttps://globtek.secure.force.com/models/ukca_declaration?id=a0Oa000000JDMsdEAH
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declarationhttps://globtek.secure.force.com/models/Morocco_SDoC_Declaration?id=a0Oa000000JDMsdEAH
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0Oa000000JDMsdEAH
REACH Declarationhttps://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttps://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC Power Supply AC Adaptor
CategoryITE Power Supply
Input Voltage Range (V)100-240V~, 50-60 Hz
Max Input Current (A)0.8A
Max Output Power Rating (W)18
Output Voltage Range (V)
EfficiencyV
Ingress ProtectionIndoor Use
Size (mm)
Enclosure
User-added image
Rating Table
Model Number (Final ordering #/Part No to be defined) VoltageAmps (A)Watts (W) RFQ
a17a000000MKpnq*
* (Final ordering #/Part No to be defined)
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01. AC inrush current: at full load, 25°C, cold start, 115 VAC, 60Hz INPUT, 230 VAC, 50Hz input, No damage shall be occurred and the input fuse shall not be blown up
02. Output Regulation: +/- 5% measured at the output connector
03. Line Voltage Regulation: +/- 2% At nominal input voltage and full load
04. Output Ripple (Vp-p): 1At 20 MHz, and output parallel with 0.1uF && 10uF capacitors to ground, Temperature at 25℃, and nominal input voltage
05. Turn-ON/OFF Overshoot: 5% maximum, 1 mS typical recovery time for 25% to 50% step load
06. Turn-ON Delay: 3 Seconds maximum at nominal input Voltage
07. Hold-Up Time: 10ms min at nominal Input Voltage
08. RIise time:100ms maximum at nominal input voltage
09. Switching Frequency: 50 KHz typical
10. Average efficiency: 80.29% minimum

B) PROTECTION
01. Over current: ≦4A with auto-recovery function
02. Over-Voltage: Electronically Protected unit will auto recover upon removal of fault
03. Short Circuit: The adapter shall not be damaged by short the DC output to Ground
04. Input Protection: Input line fusing

C) SAFETY
01. Dielectric Withstand Voltage: Primary(LN) To Secondary: 3000VAC 10mA 1 minute or 4242VDC 10mA 1 minute, Primary(LN) To Ground: 1500VAC 10mA 1 minute or 2121VDC 10mA 1 minute
02. Earth Leakage Current: 3.5mA maximum, at nominal AC input voltage and frequency
03. Earth continuity test: 0.1 Ohm

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 5% to 95% relative humidity
04. Storage Temperature: -20°C to 60°C
05. Cooling : Cooling shall be with natural convection cooling
06. SAFETY standard: Designed to meet UL/CUL(UL60950-1)
07. EMI standard: Designed to meet FCC (PART 15 CLASS B)

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 74.5 (L) * 36 (W) * 85 (H) mm maximum
03. Markings: Label and/or Pad Printed and/or Molded in the case
04. Weight: 200g maximum
Derating Curve
Qty (ea.)/Carton90
Individual Box/Gift Box Size (mm)98*54*92
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)510 x 345 x 308
Gross Weight (kg)15.6
Label Width (mm)38.7
Label Height (mm)22.3
Input Configuration
DescriptionNEMA 1-15P, North America Blades, Class II 2 ConductorsAll NEMA 1 devices are two-wire non-grounding devices (hot-neutral) rated for 125 V maximum. NEMA 1-15P plugs have two parallel flat blades, 0.25 inches (6.35 mm) wide, 0.06 inches (1.524 mm) thick, 0.625-0.718 inches (15.875–18.256 mm) long, and spaced 0.5 inches (12.7 mm) apart.
Output Configuration
Common output connector options:
Click to add to your request.
L Type (Coaxial 5.5x2.5mm plug)
C Type (Coaxial 5.5x2.1mm plug)
K Type (Coaxial 3.5x1.3mm plug)
LL Type (5.5x2.5mm Locking 760k type)
CL Type (5.5x2.1mm Locking S761k type)
Magnetic Connector
L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector
YL3 Type (KPPX-3P)
YL4 Type (KPPX-4P)
EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)
MSB Type (Micro USB)
Custom design
YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added imageAttention Mark / Refer to operating manual for operating and service instructions
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
 User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
LPSLimited Power Source 60950
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHSSpecifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products (Stock items)
SKUVolts OutCurrent Out (Amps)ConnectorRFQSample Request
17507312.01.5Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
17572612.81.4Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal

How Does an AC-DC Adapter Work?

The AC to DC adapter or external power supply consists of a power supply which is enclosed in a housing similar to an AC plug, hence the term plug type, wall plug in, plug-in or plugtop power adapter. The power supply is plugged into the mains socket and the AC Voltage is then converted by the AC to DC adapter power supply into a DC voltage that is fed into the appliance via the output cable connection.

What is a Plug-in AC-DC Adapter?

Plug in AC-DC adapters are also known as AC Adaptors or AC-DC converters and are a type of external power supply. Some electrical appliances require power but lack the internal components to derive the required voltage and power from mains power. This is where an AC adapter is used to convert the AC current into DC voltage

Request Info