Request Information Download PDF Configure Output Connector
GT-41078-WWVV-X.X-USB GT-41078-WWVV-X.X-USB
Information
Model NumberGT-41078-WWVV-X.X-USB
DescriptionGT-41078-WWVV-X.X-USB, ITE Power Supply, Wall Plug-in, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, Blade Options for Q Series Wall Plug-in Power Supplies, Output Rating: 5 Watts, 5V in 0.1V increments, Approvals: LPS SIQ Ukraine GOST-R CCC PSE Level V RoHS 2 FCC China RoHS CB cULus South African VCCI SGS (Brazil) Taiwan BSMI Saudi Israel Korea WEEE Double Insulation CE IRAM
Agency Documentshttp://www.globtek.info/certs/GT-41078-USB/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0O30000007P7YIEA0
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0O30000007P7YIEA0
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC
CategoryITE Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.2A
Wattage (W)5
Vout Range (V)5
EfficiencyV
Ingress Protection
Size (mm)71*41*31.5
EnclosureUser-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-41078-0505-USB 515 RFQ
GT-41078-0506-0.4-USB 5.60.894.98 RFQ
GT-41078-0506-USB 60.834.98 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector measured at the end of a 1 meter USB cordset employing #22 Gauge conductors
04. Line Voltage Regulation: +/- 1% typical measured at the output connector measured at the end of a 1 meter USB cordset employing #22 Gauge conductors
05. Output Ripple (Vp-p): +/-1% or 100 mV whichever is greater measured at the end of a 1 meter USB cordset employing #22 Gauge conductors. Measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector.
06. Turn-ON Delay: 3000 mS, maximum @ full load, nominal line
07. Hold-Up Time: 8 mS typical @ nominal input voltage and full load
08. Inrush Current: 30/60A maximum cold start @ 115/230Vac input
09. Switching Frequency: 66.5 KHz typical

B) PROTECTION
01. Over-Voltage: Electronically Protected unit will auto recover upon removal of fault
02. Short Circuit: Electronically Protected unit will auto recover upon removal of fault
03. Input Protection: Input line fusing
04. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006

C) SAFETY
01. Dielectric Withstand Voltage: 4242Vdc from primary to secondary
02. Touch Current: <0.25mA @ 240Vac input voltage

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 71 x 41 x 31.5 ± 1mm
03. Markings: Label and/or Pad Printed and/or Molded in the case
Derating Curve
Qty (ea.)/Carton210
Individual Box/Gift Box Size (mm)74 x 35 x 42
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)544 x 375 x 151
Gross Weight (kg)14.8
Label Width (mm)28.5
Label Height (mm)17.5
Input Configuration
DescriptionBlade Options for Q Series Wall Plug-in Power SuppliesData Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: Q-Blade Style Instruction Video




blades
User-added imageUser-added image
11                           12

INPUT CONNECTOR: Q-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "Q-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: Q-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: Q-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: Q-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: Q-EU(R)
05. Korean KS C8305 configuration: 2 pins, Class II; KR P/N: Q-KR(R)
06. Argentina IRAM 2073 configuration: 2 blades; AR P/N: Class II Q-AR(R)
07. China GB 2099 configuration: 2 blades, Class II; CN P/N:Q-CN(R)
08. India IS 1293 6A/SANS 164-3/BS546 configuration: 5A, 3 pins with Dummy Ground, Class II; IN P/N: Q-IN(R)
09. IEC320/C18 Inlet, Class II; P/N: Q-C18(R)
10. Brazilian NBR6147 configuration: 2 pins, Class II; BR P/N: Q-BR(R)
11. S. African SANS 164-1 configuration: 2 pins with Dummy Ground, Class II; SA P/N: Q-SANS164-1-16A(R)
12.  Israel / Malaysia / Singapore British Standard BS 546-15A configuration: 2 pins with Dummy Ground, Class II; P/N: Q-BS546-15A(R)

Kits

01. Q-KIT: 1,2,3,4 above
02. Q-KIT-INTL: 2,3,4 above
03. Q-KIT-6: 1,2,3,4,5,6 above
04. Q-KIT-7: 1,2,3,4,5,6,7 above
05. Q-KIT-8: 1,2,3,4,5,6,7,8 above

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added image
PRECAUCION: PARA USO EN EQUIPOS ELECTRONICOS SOLAMENTE

 
Argentina UL certificate 15AR19294.1 for GT-41078-0505-USB
User-added image
R32282

Taiwan BSMI 5V design only; http://www.bsmi.gov.tw/wSite/ct?xItem=4072&ctNode=816&mp=2
No Logo CB Certificate IEC 60950-1:2005 (2nd Edition), Am 1: 2009, CB report IEC 60950-1:2005 (2nd Edition), Am 1: 2009 and EN 60950-1:2006 + Am 1:2010 + Am 11:2009 + Am 12:2011
User-added imageCCC to GB4943.1-2011 GB9254-2008 GB17625.1-2012, Tropical <2000
User-added image  CE Certification Class II CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15 B
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
UL60950-1, cULus to UL 60950-1, 2nd Edition, 2007-03-27 and CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
FCC PART 15 CLASS B
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added image
Electric strength Of Israel Standard SI 60950 Part 1 – Safety of information technology equipment: General requirements, Feb. 2012. (5 Volts Only)
User-added image

Korea KET KC Mark GT-41078-0505-USB HU10499-13014A (5V Only)
 User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
LPSLimited Power Source
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
User-added imageRCM certificate SAA131160EA; Australia and New Zealand Regulatory Compliance, Mark (http://rcm.standards.org.au/rcmfaq/rcmfaq.htm
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf

User-added image
Saudi Arabia approval to IEC 60950-1:2005
User-added image

 
SGS (Brazil) to IEC 60950-1_2005(ed.2) + A1 2009 +A2 2013 EN60950-1:2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013
User-added image
IEC/EN60950-1
SIQ Mark License EN60950-1
 No LogoSouth Africa approval to SANS IEC 60950
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
11747151Type "A" USB “JACK”, integral to power supply enclosure
26307851Type "A" USB “JACK”, integral to power supply enclosure
12766051Type "A" USB “JACK”, integral to power supply enclosure
16693051Type "A" USB “JACK”, integral to power supply enclosure
17317051Type "A" USB “JACK”, integral to power supply enclosure
17317151Type "A" USB “JACK”, integral to power supply enclosure
17560451Type "A" USB “JACK”, integral to power supply enclosure
12765951Type "A" USB “JACK”, integral to power supply enclosure
21381551Type "A" USB “JACK”, integral to power supply enclosure
18379751.0Type "A" USB “JACK”, integral to power supply enclosure
19649551.0Type "A" USB “JACK”, integral to power supply enclosure
19768251Type "A" USB “JACK”, integral to power supply enclosure
17832251Type "A" USB “JACK”, integral to power supply enclosure
18274651Type "A" USB “JACK”, integral to power supply enclosure
1976845.60.89Type "A" USB “JACK”, integral to power supply enclosure
1961515.60.89Type "A" USB “JACK”, integral to power supply enclosure
19614560.83Type "A" USB “JACK”, integral to power supply enclosure
News Releases
TitleWeb Link
ITE Information Technology (60950-1) Power Supply AC Adapter certified by Australia SAA Approvals to mark the RCM and/or SAA131160EA per joint Australia and New Zealand national standard AS/NZS 60950.1:2011, Model Series GT-41078-USB.http://en.globtek.com/news.php/ite-information-technology-60950-1-power-supply-ac-adapter-certified-by-australia-saa-approvals-to-mark-the-rcm-andor-saa130359ea-per-joint-australia-and-new-zealand-national-standard-asnzs-6095012011-model-series-gt-41130-t
AS/NZS to 60950-1.1:2001 and RCM to AS/NZS CISPR 22:200- + A1:2010
Korean Certificate to K 60950-1(2.0)(2011-12)
USB LPS Power Supply in Class II double insulated 5W (Watt) Interchangeable blade wall plug in mechanical configuration updated to latest Taiwan standard CNS 14336-1 (2010) - Safety - Part 1: General requirements and the latest editi[[[[[[see below]]]]]http://en.globtek.com/news.php/usb-lps-power-supply-in-class-ii-double-insulated-5w-watt-interchangeable-blade-wall-plug-in-mechanical-configuration-updated-to-latest-taiwan-standard-cns-14336-1-2010-model-gt-41078-series#.Uk7ZMxA6DaM
USB LPS Power Supply in Class II double insulated 5W (Watt) Interchangeable blade wall plug in mechanical configuration updated to latest Israel standard SI 60950 Part 1, model GT-41078 Serieshttp://en.globtek.com/news.php/usb-lps-power-supply-in-class-ii-double-insulated-5w-watt-interchangeable-blade-wall-plug-in-mechanical-configuration-updated-to-latest-israel-standard-si-60950-part-1-model-gt-41078-series
South Africa Certificate GT-41078-USB to SANS IEC 60950
Saudi Arabia Certificate GT-41078-USB to 60950-1

Request Info