Request Information Download PDF Configure Output Connector
GT-41131-30VV-x.x-Q GT-41131-30VV-x.x-Q
Information
Model NumberGT-41131-30VV-x.x-Q
DescriptionGT-41131-30VV-x.x-Q, ITE Power Supply, Wall Plug-in, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Blade Options for Q Series Wall Plug-in Power Supplies, Output Rating: 30 Watts, 12-48V in 0.1V increments, Approvals: Double Insulation WEEE CCC Ukraine GOST-R FCC LPS RoHS 2 Level V VCCI China RoHS CB CE NEMKO cULus IP52 PSE PSE
Agency Documentshttp://www.globtek.info/certs/GT-41131%20Interchangeable/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0O30000007P7YWEA0
RoHS/RoHS3 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0O30000007P7YWEA0
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC Power Supply AC Adaptor
CategoryITE Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)1.0A
Wattage (W)30
Vout Range (V)12-48
EfficiencyV
Ingress Protection
Size (mm)57*89*36
EnclosureUser-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-41131-2412 12224 RFQ
GT-41131-3015-3.0 122.530 RFQ
GT-41131-3015 15230 RFQ
GT-41131-3024 241.2530 RFQ
GT-41131-3036 360.83329.99 RFQ
GT-41131-3048 480.62530 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01. IInput Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector
04. Line Voltage Regulation: +/- 1% typical measured at the output connector
05. Output Ripple (Vp-p): +/-1% or 150 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
06. Turn-ON/OFF Overshoot: 5% maximum, 1 mS typical recovery time for 25% step load
07. Turn-ON Delay: 1 Sec, typical
08. Hold-Up Time: 8 mS typical at nominal input voltage and full load
09. Inrush Current: 30A typical at 115VAC input and 60A typical at 230 VAC input
10. Switching Frequency: 65 KHz typical

B) PROTECTION
01. Over-Voltage: Protected Zener clamp across the output
02. Short Circuit: Protected unit will auto recover upon removal of fault
03. Input Protection: Input line fusing

C) SAFETY
01. Dielectric Withstand Voltage: 4242Vdc from primary to secondary
02. Touch Current: <0.25mA @ 240Vac input voltage

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 57.0 x 89.2 x 35.9 mm +/-1.0 mm
03. Markings: Label and/or Pad Printed and/or Molded in the case
Derating Curve
Qty (ea.)/Carton60
Individual Box/Gift Box Size (mm)117*59*82
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)378 x 323 x 360
Gross Weight (kg)15.6
Label Width (mm)42.0
Label Height (mm)29.6
Input Configuration
DescriptionBlade Options for Q Series Wall Plug-in Power SuppliesData Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: Q-Blade Style Instruction Video




blades
User-added imageUser-added image
11                           12

INPUT CONNECTOR: Q-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "Q-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: Q-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: Q-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: Q-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: Q-EU(R)
05. Korean KS C8305 configuration: 2 pins, Class II; KR P/N: Q-KR(R)
06. Argentina IRAM 2073 configuration: 2 blades; AR P/N: Class II Q-AR(R)
07. China GB 2099 configuration: 2 blades, Class II; CN P/N:Q-CN(R)
08. India IS 1293 6A/ South Africa SANS 164-3/BS546 configuration: 5A, 3 pins with Dummy Ground, Class II; IN P/N: Q-IN(R)
09. IEC320/C18 Inlet, Class II; P/N: Q-C18(R)
10. Brazilian NBR6147 configuration: 2 pins, Class II; BR P/N: Q-BR(R)
 

Kits

01. Q-KIT: 1,2,3,4 above
02. Q-KIT-INTL: 2,3,4 above
03. Q-KIT-6: 1,2,3,4,5,6 above
04. Q-KIT-7: 1,2,3,4,5,6,7 above
05. Q-KIT-8: 1,2,3,4,5,6,7,8 above

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
No Logo CB Certificate IEC 60950-1:2005 (2nd Edition), Am 1: 2009, CB report IEC 60950-1:2005 (2nd Edition), Am 1: 2009 and EN 60950-1:2006 + Am 1:2010 + Am 11:2009 + Am 12:2011
User-added imageCCC to GB4943.1-2011 GB9254-2008 GB17625.1-2012, Tropical <2000
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
UL60950-1, cULus to UL 60950-1, 2nd Edition, 2007-03-27 and CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
FCC PART 15 CLASS B
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP52Ingress Protection: IP52 to IEC60529:2001 Protected against dust - limited ingress (no harmful deposit) and Protected against direct sprays up to 15 degrees from the vertical
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50313285, to J60950-1(H26) , J55022(H22),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50313285, to J60950-1(H26) , J55022(H22),J3000(H25)[DC15≤ 30V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
 User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
LPSLimited Power Source
User-added imageNEMKO EN60950-1:2006, A11, A1, A12,A2
RoHSSpecifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
137671122.5Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
238290122.5Switchcraft S10KS17 locking, sealed high amperage power plug
182755122.5Neutrik NSC-3F Miniature connector 3 female contacts
181564122.5Female Barrel 3.5*1.35*9.5mm, without Locking Notch nor Spring Clip or Equal
179908122.5Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
216081122.5Phoenix 1912074 2 Pins or equivalent
170783122.5Socket for interchangeable o/p connectors
166831122.5Female Barrel 5.5 * 2.5 * 13.8mm w/ 6.5mm Thumb Screw or Equal
161790122.5Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
161756122.5Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
143685122.08FEMALE BARREL 5.5*2.1*9.5 mm SHOGYO P/N: MP-121MR OR EQUIVALENT
250669122.5Switchcraft S10KS17 locking, sealed high amperage power plug
1640661523-Pin Male Cable Connector, Blue, Binder P/N 99-9108-00-03, NO EQUIVALENT
128524152Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
1901791525-Pin Circular Connector, Binder P/N 99 9113 00 05 NO EQUIVALENT!
137695152Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
150784152Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
1848731525-Pin Circular Connector, Binder P/N 99-9114-00-05 NO EQUIVALENT!
171764241.25Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
163593241.25Stripped 30 +/-10mm; Tinned 4 +/- 1mm
180318241.25Female Barrel 5.5*2.5*9.5mm No internal Spring Clip nor Locking Notch or Equal
177170241.25Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
137716241.25Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
184323241.252 Pin FX9
161535241.25Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
161791241.25Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
174957301Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
149205480.625Female Barrel, Straight 2.35 * 0.7 * 9.5 mm with internal Spring Clip and Locking Notch or Equal
232794480.625Socket for interchangeable o/p connectors
13774648.625Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
170918480.625Female Barrel 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
171005480.625Female Barrel 5.5*2.5*11mm, Right Angle with Spring Clip & Locking Notch or Equal
170715480.625Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
166831122.5Female Barrel 5.5 * 2.5 * 13.8mm w/ 6.5mm Thumb Screw or Equal

Request Info

Text us your inquiry