Request Information Download PDF Configure Output Connector
GT-41134-06VV-x.x-Q GT-41134-06VV-x.x-Q
Information
Model NumberGT-41134-06VV-x.x-Q
DescriptionGT-41134-06VV-x.x-Q, ITE Power Supply, Wall Plug-in, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, Blade Options for Q Series Wall Plug-in Power Supplies, Output Rating: 6 Watts, 3.3-24V in 0.1V increments, Approvals: RCM WEEE VCCI CCC RoHS 2 Ukraine Double Insulation LPS NrCAN EC China RoHS Level V CB Korea (7.5V Only) CE FCC cULus IP52 EAC S-Mark PSE PSE PSE
Agency Documentshttp://www.globtek.info/certs/GT-41134%20Interchangeable/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0O30000007P7ZpEAK
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0O30000007P7ZpEAK
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC
CategoryITE Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.3 A
Wattage (W)6
Vout Range (V)3.3-24
EfficiencyV
Ingress ProtectionIndoor Use
Size (mm)41*62*32
EnclosureUser-added image
 
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-41134-0603 3.31.85.94 RFQ
GT-41134-0606-2.7 3.31.23.96 RFQ
GT-41134-0604 41.56 RFQ
GT-41134-0606-1.0 51.26 RFQ
GT-41134-0606-0.5 5.51.096 RFQ
GT-41134-0606 616 RFQ
GT-41134-0612-5.5 6.50.9236 RFQ
GT-41134-0612-4.5 7.50.86 RFQ
GT-41134-0612-3.0 90.676.03 RFQ
GT-41134-0612 120.56 RFQ
GT-41134-0615 150.46 RFQ
GT-41134-0618 180.335.94 RFQ
GT-41134-0624 240.256 RFQ
GT-41134-0648 480.1256 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector
04. Line Voltage Regulation: +/- 1% typical measured at the output connector
05. Output Ripple (Vp-p): +/-1% or 150 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
06. Turn-ON/OFF Overshoot: 5% maximum, 1 mS typical recovery time for 25% step load
07. Turn-ON Delay: 1 Second typical.
08. Hold-Up Time: 8 mS typical at nominal input voltage and full load
09. Inrush Current: 30A typical at 115VAC input and 60A typical at 230VAC input
10. Switching Frequency: 65 KHz typical

B) PROTECTION
01. Over-Voltage: Protected with Zener clamp across the output
02. Short Circuit: Protected, unit will auto recover upon removal of fault
03. Input Protection: Input line fusing

C) SAFETY
01. Dielectric Withstand Voltage: 4242Vdc from primary to secondary
02. Touch Current: <0.25mA @ 240Vac input voltage
03. Earth continuity test:<0.1 Ohm or < 0.2 Ohm when with a non-detachable Power Supply cord, Class I Only

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 95% relative humidity
04. Storage Temperature: -20°C to 80°C
Normal performance after 2h recovery time at the room temperature without connection to mains
05. RoHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 40.5 x 62.0 x 31.5 +/-1.0 mm
03. Markings: Label and/or Pad Printed and/or Molded in the case
Derating Curve
Qty (ea.)/Carton140
Individual Box/Gift Box Size (mm)50x75x65
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)481 x 395 x 226
Gross Weight (kg)15.2
Label Width (mm)29.8
Label Height (mm)20.8
Input Configuration
DescriptionBlade Options for Q Series Wall Plug-in Power SuppliesData Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: Q-Blade Style Instruction Video




blades
User-added imageUser-added image
11                           12

INPUT CONNECTOR: Q-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "Q-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: Q-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: Q-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: Q-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: Q-EU(R)
05. Korean KS C8305 configuration: 2 pins, Class II; KR P/N: Q-KR(R)
06. Argentina IRAM 2073 configuration: 2 blades; AR P/N: Class II Q-AR(R)
07. China GB 2099 configuration: 2 blades, Class II; CN P/N:Q-CN(R)
08. India IS 1293 6A/SANS 164-3/BS546 configuration: 5A, 3 pins with Dummy Ground, Class II; IN P/N: Q-IN(R)
09. IEC320/C18 Inlet, Class II; P/N: Q-C18(R)
10. Brazilian NBR6147 configuration: 2 pins, Class II; BR P/N: Q-BR(R)
11. S. African SANS 164-1 configuration: 2 pins with Dummy Ground, Class II; SA P/N: Q-SANS164-1-16A(R)
12.  Israel / Malaysia / Singapore British Standard BS 546-15A configuration: 2 pins with Dummy Ground, Class II; P/N: Q-BS546-15A(R)

Kits

01. Q-KIT: 1,2,3,4 above
02. Q-KIT-INTL: 2,3,4 above
03. Q-KIT-6: 1,2,3,4,5,6 above
04. Q-KIT-7: 1,2,3,4,5,6,7 above
05. Q-KIT-8: 1,2,3,4,5,6,7,8 above

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription

No Logo Applicable

IEC 60950-1:2005 (Second Edition) + A1:2009 + A2:2013
User-added imageCCC to GB4943.1-2011 GB9254-2008 GB17625.1-2012, Tropical <2000
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
UL60950-1, cULus to UL 60950-1, 2nd Edition, 2007-03-27 and CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image  Certification # TC RU AR46.B.75423 Custom Union of Russia, Belarus and Kazakhstan
No LogoEC-Conformity Declaration: http://www.globtek.com/html/iso_certificates/EC-DECLARATION.pdf, REACH 144 SVHC: http://www.globtek.com/html/iso_certificates/Reach144.pdf
User-added image
FCC PART 15 CLASS B
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP52Ingress Protection: IP52 to IEC60529:2001 Protected against dust - limited ingress (no harmful deposit) and Protected against direct sprays up to 15 degrees from the vertical
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50315169, to J60950-1(H26) , J55022(H22),[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50315866, to J60950-1(H26) , J55022(H22),[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50315866, to J60950-1(H26) , J55022(H22),[DC15V≤30V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
User-added image
Korea KET KC Mark GT-41134-0612-4.5 HU10499-13016A (7.5V Only) http://www.globtek.info/certs/GT-41134%20Interchangeable/KOREAN-CERT-GT-41134-06-12-4.5%20K%2060950-1(2.0)(2011-12).pdf
 User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
LPSLimited Power Source
User-added imageEEV1191Natural Resources Canada (NRCan): CSA Standard C381.1-08, QSP NRCAN EEV1191; http://shop.csa.ca/en/canada/energy-efficiency/cancsa-c3811-08/invt/27024802008
User-added imageRCM certificate SAA-171833-EA; Australia and New Zealand Regulatory Compliance, Mark (http://rcm.standards.org.au/rcmfaq/rcmfaq.htm)
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added imageS-Mark Certificate EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 +A2:2013 (http://www.intertek.com/marks/s/)
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
213813120.5Female Barrel 3.5*1.35*9.5mm, without Locking Notch nor Spring Clip or Equal
152519120.5Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
161185120.5Stripped 50 +/-5mm; Tinned 9.5 +/- 2mm or Equal
205394120.5Phoenix Contact MC 1,5/ 4-ST1-5,08
210275120.5Female Barrel 5.5 * 2.1 * 14.0 mm w/ 6.5mm Thumb Screw or Equal
175012120.5Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
168131120.5Female Barrel 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
219899120.5Female Barrel 5.5 * 2.1 * 14.0 mm w/ 6.5mm Thumb Screw or Equal
168343120.52 Pin DC Jack
229498120.5Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
167227120.5Stripped 50 +/-5mm; Tinned 9.5 +/- 2mm or Equal
168347120.5Female Barrel 5.5*2.1*14mm No internal Spring Clip nor Locking Notch or Equal
167171120.5Female Barrel 5.5 * 2.5 * 10mm No internal Spring Clip nor Locking Notch or Equal
19918114.80.4Molex 351430201,pin 1"+",pin2"-"
184246150.4Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
169788170.35Female Barrel 5.5*2.5*9.5mm No internal Spring Clip nor Locking Notch or Equal
189956240.25Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
18033541.5Female Barrel straight 3.5*1.3*9.5mm, without Locking Notch nor Spring Clip or Equal
17983751.2Female Barrel, Right Angle 3.5 * 1.35 * 6.5mm with internal Spring Clip and Locking Notch or Equal
18105050.2Housing: JST XHP-2, Contacts: JST SXH-001T-P0.6, No Equivalent
18352751.2Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
20746451.2Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
19383551.2Micro-B USB 5 Pin Type "B" or Equal
19339951.2Female Barrel 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
19248751.2Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
17781751.2Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
17135451.2Micro USB type B or Equal with 6.5mm metal insert depth.
17134651.2USB type B or Equal with 6.5mm wide over-mold connector
16833951.2Female Barrel 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
16834651.2Female Barrel 4.0*1.7*9.5mm with internal Spring Clip and Locking Notch or Equal
16816351.2Micro-B USB 5 Pin Type "B" or Equal
16812551.2Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
16799351.2Stripped 30 +/-5mm; Tinned 9 +/- 2mm or Equal
16717051.2Stripped 25.0 +/- 2mm; Tinned 9 +/- 2mm
16698751.2Female Barrel 3.5*1.35*11mm, with Locking Notch and Spring Clip or Equal
16111851.2Stripped 100 +/-10mm; Tinned 7 +3/-0mm (Critical!)
15981451.2USB type B or Equal
15252251.2Stripped 50 +/-5mm; Tinned 9.5 +/- 2mm or Equal
13753651.2Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
10157751.2Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
10188650.22 Pin FX9
1836735.51.09Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
16692861Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
16701561Female Barrel 4.75*1.7*9.5mm or Equal
16701661Female Barrel 4.75*1.7*9.5mm or Equal
16715961Stripped 50 +/-5mm; Tinned 9.5 +/- 2mm or Equal
17101361Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
17715561Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
17715861Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
18188661Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
23181161Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
1961496.01.0Micro-B USB 5 Pin Type "B" or Equal
1798136.01.0Female Barrel, Locking, 5.5 * 2.5 * 13.8mm w/ 4.0mm Thumb Screw or Equal
1683446.50.92Female Barrel 5.5*2.1*12mm No internal Spring Clip nor Locking Notch or Equal
1794056.51Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
1683456.50.923HIROSE 4-Pin Connector, P/N: MQ 172X-4SA-CV(50) or Equal
1681757.50.8Female Barrel 5.5*2.1*9.5mm; No internal Spring Clip nor Locking Notch or Equal
1618047.50.8Female Barrel 3.5*1.35*9.5mm, without Locking Notch nor Spring Clip or Equal
1686597.51.0Female Barrel, Straight 2.35 * 0.7 * 9.5 mm WITH internal Spring Clip and Locking Notch or Equal
20249890.66RJ11 Plug, 6 Pin or Equal
17094790.5MOLEX P/N:43025-0800 Micro-fit 3.0 (8) circuit connector housing with MOLEX TERMINAL P/N: 430303-0080 Female terminal or Equal
17520490.67Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
16733590.67Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
16817890.67Female Barrel 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
24436590.67Female Barrel 5.5*2.1*9.5mm No internal Spring Clip nor Locking Notch or Equal
14894990.67Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
18086490.67Female Barrel 5.5*2.1*9.5mm No internal Spring Clip nor Locking Notch or Equal
16815490.6663.5x14mm Male Plug or Equal
19882290.67Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
152519120.5Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
169788170.35Female Barrel 5.5*2.5*9.5mm No internal Spring Clip nor Locking Notch or Equal
17134651.2USB type B or Equal with 6.5mm wide over-mold connector
News Releases
TitleWeb Link
KCC Certificate K 60950-1(2.0)(2011-12)
Flexible LED Strip Light cable assembly in Warm white 3200k for industrial lighting application available in stock and modified configurations, model LMPWHLED250MMX3(R)http://en.globtek.com/news.php/flexible-led-strip-light-cable-assembly-in-warm-white-3200k-for-industrial-lighting-application-available-in-stock-and-modified-configurations

Request Info