Request Information Download PDF Configure Output Connector
GT-41135-12VV-x.x GT-41135-12VV-x.x
Information
Model NumberGT-41135-12VV-x.x
DescriptionGT-41135-12VV-x.x, ITE Power Supply, Wall Plug-in, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Blade Options for Q Series Wall Plug-in Power Supplies, Output Rating: 12 Watts, 5-48V in 0.1V increments, Approvals: VCCI GOST-R PSE Level V RoHS 2 LPS Ukraine CCC CB China RoHS WEEE Double Insulation cUL IP52 PSE CE NEMKO
Agency Documentshttp://www.globtek.info/certs/GT-41135%20Interchangeable/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0O30000007P7YNEA0
RoHS/RoHS3 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0O30000007P7YNEA0
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC Power Supply AC Adaptor
CategoryITE Power Supply
Input Voltage Range (V)100-240V~, 50-60 Hz
Max Input Current (A)0.4A
Max Output Power Rating (W)12
Output Voltage Range (V)5-48
EfficiencyV
Ingress ProtectionIP52
Size (mm)44*74*35
EnclosureUser-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-41135-1205 5210 RFQ
GT-41135-0805 51.57.5 RFQ
GT-41135-0912-6.0 61.59 RFQ
GT-41135-1212-4.5 7.51.339.98 RFQ
GT-41135-1212 12112 RFQ
GT-41135-1224-9.0 150.812 RFQ
GT-41135-1224 240.512 RFQ
GT-41135-1248 480.2512 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:

01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector
04. Line Voltage Regulation: +/- 5% typical measured at the output connector
05. Output Ripple (Vp-p): +/-1% or 150 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
06. Turn-ON/OFF Overshoot: 5% maximum, 1 mS typical recovery time for 25% step load
07. Turn-ON Delay: 1 Sec,typical
08. Hold-Up Time: 8 mS typical at nominal input voltage and full load
09. Inrush Current: 50A typical at 115VAC input ; 100A typical at 230VAC input
10. Switching Frequency: 65 KHz typical
11. Efficiency: >71.2% ( CEC Level V )

B) PROTECTION
01. Over-Voltage: Protected Zener clamp across the output
02. Short Circuit: Protected unit will auto recover upon removal of fault
03. Input Protection: Input line fusing
04. Over Load Protection: No damage and auto restart

C) SAFETY
01. Dielectric Withstand Voltage: 3000Vac 0r 4242Vdc 5mA 1minute
02. Leakage current: <0.01mA For 230VAC /60 Hz max.

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 43.5 x 74.0 x 35.3 +/-1.0 mm
03. Markings: Label and/or Pad Printed and/or Molded in the case
Derating Curve
Qty (ea.)/Carton60
Individual Box/Gift Box Size (mm)90.5*73*53
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)388 x 380 x 245
Gross Weight (kg)15.4
Label Width (mm)29.8
Label Height (mm)20.8
Input Configuration
DescriptionBlade Options for Q Series Wall Plug-in Power SuppliesData Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: Q-Blade Style Instruction Video




blades
User-added imageUser-added image
11                           12

INPUT CONNECTOR: Q-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "Q-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: Q-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: Q-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: Q-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: Q-EU(R)
05. Korean KS C8305 configuration: 2 pins, Class II; KR P/N: Q-KR(R)
06. Argentina IRAM 2073 configuration: 2 blades; AR P/N: Class II Q-AR(R)
07. China GB 2099 configuration: 2 blades, Class II; CN P/N:Q-CN(R)
08. India IS 1293 6A/ South Africa SANS 164-3/BS546 configuration: 5A, 3 pins with Dummy Ground, Class II; IN P/N: Q-IN(R)
09. IEC320/C18 Inlet, Class II; P/N: Q-C18(R)
10. Brazilian NBR6147 configuration: 2 pins, Class II; BR P/N: Q-BR(R)
 

Kits

01. Q-KIT: 1,2,3,4 above
02. Q-KIT-INTL: 2,3,4 above
03. Q-KIT-6: 1,2,3,4,5,6 above
04. Q-KIT-7: 1,2,3,4,5,6,7 above
05. Q-KIT-8: 1,2,3,4,5,6,7,8 above

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
No Logo CB Certificate IEC 60950-1:2005 (2nd Edition), Am 1: 2009 + Am 2:2013
User-added imageCCC to GB4943.1-2011 GB9254-2008 GB17625.1-2012, Tropical <2000
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
UL60950-1, cULus to UL 60950-1, 1st Edition, 2007-10-31 and CSA C22.2 No. 60950-1-03, 1st Edition, 2006-07
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
IP52Ingress Protection: IP52 to IEC60529:2001 Protected against dust - limited ingress (no harmful deposit) and Protected against direct sprays up to 15 degrees from the vertical
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50316221, to J60950-1(H26) , J55022(H22),[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
 User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
LPSLimited Power Source
User-added imageNEMKO EN60950-1:2006, A11, A1, A12,A2
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHSSpecifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
168196121Stripped 50 +/-5mm; Tinned 9.5 +/- 2mm or Equal
228973121RJ12, 6 Pin or Equal
148967121Female Barrel, Locking, 5.5 * 2.5 * 13.8mm w/ 4.0mm Thumb Screw No Equal
218243121Female Barrel 5.5 * 2.1 * 13.8 mm w/ 4 mm Thumb Screw or Equal
199784121.0Female Barrel 5.5*2.0*12 mm, Straight, with internal Spring Clip and Locking Notch or Equal
161745121Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
167172121Female Barrel 5.5 * 2.5 * 10mm No internal Spring Clip nor Locking Notch or Equal
198615121Stripped 50 +/-5mm; Tinned 9.5 +/- 2mm or Equal
262868121Female Barrel 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
168638150.8Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
199844150.8Female Barrel 5.5*2.0*12 mm, Straight, with internal Spring Clip and Locking Notch or Equal
163050150.8Stripped 25 +/- 5mm; Tinned 6 +/- 2mm or Equal
1794213.31Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
21263152Micro-B USB 5 Pin Type "B" or Equal
19015152Micro USB type B without resistor
17641552.0Micro-B USB 5 Pin Type "B" or Equal
16887552Mini-B USB 5 Pin Type "B" or Equal with 200 Ohm resistor between Pin 2 & 3
11750951.5Micro-B USB 5 Pin Type "B" or Equal
13755252.0Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
24151951.5Micro-B USB 5 Pin Type "B" or Equal
26447561.5Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
17802561.5Female Barrel Right Angle, 5.5*2.1*12mm No internal Spring Clip nor Locking Notch or Equal
1697757.51.33Female Barrel Right Angle, 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal

Request Info

Text us your inquiry