Model Number (Final ordering #/Part No to be defined)
Voltage
Amps (A)
Watts (W)
RFQ
GTM96060-A0606-1.0-FW*
5
1.2
6
* (Final ordering #/Part No to be defined)
Specifications
Input
Input Voltage:
Specified: 90-264VAC, Nameplate: 100-240VAC 100% rated load current for 90-264VAC 85% rated load current for 85-264VAC 100% rated load current for 110-370VDC
Input Frequency:
Specified: 47-63Hz, Nameplate: 50-60Hz
No Load Input Power:
<75mW @ 230VAC
Inrush Current:
<30A @ 230VAC (cold start @ 25°C)
Efficiency:
DoE Energy Level VI and CoC Tier 2, for models 5V and above
Output
Turn-on Delay:
1 second max. @ 100VAC and full load
Output Regulation
± 5% (measured at the output connector)
Line Regulation:
± 1% (measured at the output connector @ full load)
Ripple:
0.5% pk-pk or 50mV, whichever is greater (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW) (Note: < 0.2% or 25mV option available upon request)
Transient Response:
5% deviation max. (with 25% load step), recovery to within 1ms typ.
Startup Overshoot:
<5% (full load)
Hold-up Time:
8ms min. (100VAC and full load)
Power Indicator:
Green LED
Switching Frequency:
65KHz typ.
Protections
Input Protection:
300Vac MOV transient suppressor, input line fusing
Over-Voltage Protection:
110-130%, of nominal output voltage
Current Limiting: (Standard CV Models):
Short circuit and overload protected, auto recovery Output current limit: 120% to 250% of rated output current (Upper end of current limit range is determined by normal output power rating, not derated output power level)
Current Limiting: (Constant Current Models):
± 10% of specified nominal output current rating Current regulated from Vout (nom.) to 0.25 * Vout (nom.) Average output current below 0.25 * Vout will be reduced, and unit will hiccup cycle
Over-Temperature Protection
On-chip temperature sensor (integrated in primary-side switching controller), shut down at Tj = ~140°C, restart at Tj = ~70°C
Custom lengths, construction, cable types, ferrites, filters, and termination available upon request.
Popular Products (Stock items)
SKU
Volts Out
Current Out (Amps)
Connector
RFQ
Sample Request
What is an open frame or internal AC-DC Power supply?
Open frame AC-DC power supplies are also known as AC-DC converters and are a type of internal power supply. The open frame AC to DC power supply is built into the inside of a system and used to convert the AC current into DC voltage.
How Does an AC-DC Adapter Work?
The AC to DC adapter or external power supply consists of a power supply which is enclosed in a housing similar to an AC plug, hence the term plug type, wall plug in, plug-in or plugtop power adapter. The power supply is plugged into the mains socket and the AC Voltage is then converted by the AC to DC adapter power supply into a DC voltage that is fed into the appliance via the output cable connection.