GTM21096-WWVV-F Open Frame/Internal Medical Power Supply Datasheet

Request Information Download PDF

GTM21096-WWVV-F Image

Model Image

GTM21096-WWVV-F, Medical Power Supply, Open Frame/Internal, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Molex 09-65-2058 5 Position Header Pin 1: Earth, Pin 2: Removed, PIN 3: Neutral, Pin 4: removed, Pin 5: Line, Output Rating: 19 Watts, Power rating with convection cooling (W) , 3.3-24V in 0.1V increments, Approvals: EAC; CB 60601-1; CE; China RoHS; RoHS; SIQ; Ukraine; VCCI; WEEE; cRUus; Class I;

Information

Model Number

GTM21096-WWVV-F

Description

GTM21096-WWVV-F, Medical Power Supply, Open Frame/Internal, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Molex 09-65-2058 5 Position Header Pin 1: Earth, Pin 2: Removed, PIN 3: Neutral, Pin 4: removed, Pin 5: Line, Output Rating: 19 Watts, Power rating with convection cooling (W) , 3.3-24V in 0.1V increments, Approvals: EAC; CB 60601-1; CE; China RoHS; RoHS; SIQ; Ukraine; VCCI; WEEE; cRUus; Class I;

Agency Documents

http://www.globtek.info/certs/GTM21096/

CE EC-Declaration for Medical

https://globtek.secure.force.com/models/ec_declaration?id=a0O30000007P7Z8EAK

CE EC-Declaration for Industrial/Commercial/ITE

Contact GlobTek for more information

CE EC-Declaration for Household

Contact GlobTek for more information

UKCA-Declaration for Medical

https://globtek.secure.force.com/models/ukca_declaration?id=a0O30000007P7Z8EAK

UKCA-Declaration for Industrial/Commercial/ITE

Contact GlobTek for more information

UKCA-Declaration for Household

Contact GlobTek for more information

Morocco SDoC Declaration

https://globtek.secure.force.com/models/Morocco_SDoC_Declaration?id=a0O30000007P7Z8EAK

RoHS/RoHS3 Declaration

https://www.globtek.com/pdf/rohs_cert/a0O30000007P7Z8EAK

REACH Declaration

https://www.globtek.com/pdf/iso_certificates/REACH.pdf

Conflict Minerals Declaration

https://www.globtek.com/pdf/conflict-minerals.pdf

Model Parameters

Type

Open Frame/Internal

Technology

Regulated Switchmode AC-DC Power Supply AC Adaptor

Category

Medical Power Supply

Input Voltage Range (V)

100-240V~, 50-60 Hz

Max Input Current (A)

0.5A Max

Max Output Power Rating (W)

Output Voltage Range (V)

3.3-24

Efficiency

N/A

Ingress Protection

Size (mm)

Enclosure

IMPORTANT INSTALLATION NOTES:
FOR PROPER INSULATION AND GROUNDING RELIABILITY, FOLLOW EITHER OPTIONS BELOW

OPTION 1: USE NYLON 4-40 SCREWS AND NYLON STAND-OFF FOR ALL MOUNTING HOLES AND ADD JUMPER

WIRE OPTION SHOWN BELOW FOR EARTH CONNECTION BETWEEN MOUNTING HOLES 4 AND 3.

RING TERMINAL, AMP P/N: 8-34142-5 AWG 18 STRANDED WIRE,

GREEN, 100 mm LENGTH

OPTION 2. USE METALLIC 4-40 SCREWS AND METALLIC STAND-OFF FOR HOLES 3 AND 4 AND USE NYLON 4-40

SCREWS AND NYLON STAND-OFF FOR HOLES 1 AND 2.

OPTION 2 IS ONLY APPLICABLE IF SYSTEM CHASSIS WHERE THE POWER SUPPLY IS MOUNTED IS MADE

OUT OF METAL.

Rating Table

Model Number (Final ordering #/Part No to be defined)	Voltage	Amps (A)	Watts (W)
GTM21096-1003-FW*	3.3	2.6	8.58
GTM21096-1003-F*	3.3	2.6	8.58
GTM21096-1505-F*	5	2.6	13
GTM21096-1505-FW*	5	2.6	13
GTM21096-1506-F*	6	2.5	15
GTM21096-1506-FW*	6	2.5	15
GTM21096-1509-FW*	9	1.7	15.3
GTM21096-1509-F*	9	1.7	15.3
GTM21096-1512-FW*	12	1.25	15
GTM21096-1512-F*	12	1.25	15
GTM21096-1815-FW*	15	1.2	18
GTM21096-1815-F*	15	1.2	18
GTM21096-1818-FW*	18	1	18
GTM21096-1818-F*	18	1	18
GTM21096-1824-F*	24	0.75	18
GTM21096-1824-FW*	24	0.75	18
GTM21096-1948-FW*	48	0.4	19.2
GTM21096-1948-F*	48	0.4	19.2

* (Final ordering #/Part No to be defined)

Specifications

A) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector
04. Line Voltage Regulation: +/- 1% typical measured at full load
05. Output Ripple (Vp-p): +/- 1% of output voltage, Vp-p, typical
06. Turn-ON/OFF: 5% maximum,1 mS typical recovery time for 25% step load
07. Turn-ON Delay: 1 Sec, typical
08. Hold-Up Time: 8 mS typical @ nominal input voltage and full load
09. Inrush Current: 30A maximum cold start @ 115 Vac input, 60A maximum cold start @ 230 Vac input
10. Switching Frequency: 100 KHz typical, varies with line and load
11. Efficiency: 75% typical at nominal input and full load

B) PROTECTION
01. Over-Voltage: limited via crowbar method
02. Short Circuit/Over-load: momentary short circuit protected, output will autorecover upon removal of short
03. Input Protection: Input line

C) SAFETY
01. Dielectric Withstand Voltage: 5656 Vdc from primary to secondary
02. Earth Leakage Current: Did not exceed 5 mA in NORMAL CONDITION and 10 mA in SINGLE FAULT CONDITION
03. Touch Current: Did not exceed 100uA NC(Normal condition) 500uA SFC(single fault condition)
04. Earth continuity test:<0.1 Ohm or < 0.2 Ohm when with a non-detachable Power Supply cord, Class I Only
05. Type of protection against electric shock: class i
06. Degree of safety of application in the presence of flammable anesthetic: not evaluated
07. Mode of operation: Continuous
08. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection

E) ENCLOSURE
01. Housing: Open Frame
02. Size: 84.6 x 41.4 x 28.9 mm

Derating Curve

Qty (ea.)/Carton

120

Individual Box/Gift Box Size (mm)

90*45*30

Individual Box/Gift Box Color

White

Master Carton Size (mm)

455 x 405 x 220

Gross Weight (kg)

21.1

Label Width (mm)

25.4

Label Height (mm)

17.8

Input Configuration

Description

Molex 09-65-2058 5 Position Header Pin 1: Earth, Pin 2: Removed, PIN 3: Neutral, Pin 4: removed, Pin 5: LineDocument: http://www.molex.com/pdm_docs/sd/009652058_sd.pdf
Catalog Page: http://www.molex.com/molex/products/datasheet.jsp?part=active/0009652058_PCB_HEADERS.xml
User-added image

Mates With Part(s):
5195 SPOX™ Crimp Housing, 5239 KK® Crimp Housing

Approvals

Logo	Description
	Attention Mark / Refer to operating manual for operating and service instructions
No Logo Applicable	CB report IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007) and or EN 60601-1:2006 3rd Edition
	CE Mark: tested to comply with EN 60601-1-2:2015 Medical electrical equipment Part 1-2: - Mark is on the label or Molded in the case
	CHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
	Class I Earth Ground
	cRUus UL Recognized Component E172861 3rd Edition w-RM ANSI-AAMI ES60601-1 (2005 + C1:09 + A2:10) and CAN-CSA-C22.2 No. 60601-1 (2008)
	Certification # TC RU AR46.B.75423 Custom Union of Russia, Belarus and Kazakhstan
	Indoor Use Only - Mark is on the label or Molded in the case
RoHS	Specifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
IEC/EN60601-1	SIQ Mark License EN60601-1
	UKCA Certification
	Ukraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
	Japan: Voluntary Control Council for Interference (VCCI)
	WEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case