Request Information Download PDF
Model NumberGTMG3083P150VV-X.X-FW
DescriptionGTMG3083P150VV-X.X-FW, Medical Power Supply, Open Frame/Internal, Open Frame Medical Power Supply, , Input Rating: 90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz), 3 Pin connector Mating Housing: JST VHR-3N or equivalent Mating Contact: JST SVH-21T-P1.1 or equivalent, Output Rating: 150 Watts, 12-48V in 0.1V increments, Approvals: CE China RoHS cUR Double Insulation GOST-R PSE RoHS 2 Ukraine VCCI WEEE cUL
Agency Documents
CE EC-Declaration for Medical
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
RoHS/RoHS2 Declaration
REACH Declaration
Conflict Minerals Declaration
Model Parameters
TypeOpen Frame/Internal
TechnologyOpen Frame Medical Power Supply
CategoryMedical Power Supply
Input Voltage90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz)
I/P Amps (A)3.23A / 100VAC, 1.23A / 240VAC
Wattage (W)150
Vout Range (V)12-48
Ingress ProtectionIPX0
Size (mm)50.8x32.1x101.6 mm
EnclosureUser-added image

User-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GTMG3083P15012-FW 1212.5150 RFQ
GTMG3083P15015-FW 1510150 RFQ
GTMG3083P15024-FW 246.25150 RFQ
GTMG3083P15048-FW 483.12149.76 RFQ
Specifications250W Open Frame Medical Power Supply

Universal AC input / Full range with active PFC
2"x 4" footprint
Medical safety approval: ANSI / AAMI ES 60601-1 / TUV EN 60601-1; IEC 60601-1 / 2xMOPP
100W convection cooling and 150W with 10.5 CFM forced air
Protection: Short circuit, Over load, Over voltage
High operation temperature up to 70°C Power OK signal
Built-in fan supply
Withstand 2G vibration test

DC Voltage Range: 12V 15V 24V 48V
Rated Curren:t 12.5A 10A 6.25A 3.12A
Current Range (Convection): 0 ~ 8.3A 0 ~ 6.7A 0 ~ 4.2A 0 ~ 2.1A
Current Range (23.5 CFM Fan): 0 ~ 12.5 A 0 ~ 10A 0 ~ 6.2 5A 0 ~3.12A
Rated Power (Convection): 99.6W 100.5W 100.8W 100.8W
Rated Power (23.5 CFM Fan): 150W 150W 150W 150W
Ripple & Noise (Max.): 120mVp-p 150mVp-p 240mVp-p 480mVp-p
Voltage Adj. Range: ±10%
Voltage Tolerance: ±2.0% ±2.0% ±1.0% ±1.0%
Line Regulation: ±0.5% ±0.5% ±0.5% ±0.5%
Load Regulation: ±2.0% ±2.0% ±2.0% ±2.0%
Setup, Rise Time: 2000ms, 50ms / 230VAC, 3500ms, 50ms / 115VAC at full load
Hold Up Time: >16ms / 230VAC, >16ms / 115VAC at full load

Voltage Range: 90 ~ 264VAC, 127 ~ 373VDC
Frequency Range: 47 ~ 63Hz
Efficiency (Typ.) at 230VAC: 90% 90% 91% 91%
AC Current (Typ.): 1.71A / 100VAC, 1.23A / 240VAC
Inrush Current (Typ.): Cold Start 30A / 115VAC, 60A / 230VAC
Leakage Current: For earth For earth < 275uA / 264VAC, For patient < 100uA / 264VAC


Over Load: Above 110% rated output power Protection type: latch-style (Recovery after reset AC power ON)
Over Voltage: 115 ~ 140% rated output voltage Protection type: latch-style (Recovery after reset AC power ON)

Working Temp.: -20 ~ +70°C (Refer to output load de-rating curve)
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp. & Humidity: -40 ~ +85°C, 10 ~ 95% RH
Temp. Coefficient: ±0.03% / °C (0 ~ 50°C)
Vibration: 10 ~ 500Hz, 2G 10min. / 1cycle, period for 60min. each along X, Y, Z axes

Safety & EMC
Safety Standards: Meets UL / cUL (ANSI / AAMI ES 60601-1; CAN / CSA-C22.2 No.60601-1); NFPA 99
Meets TUV (EN 60601-1; IEC 60601-1); MOPP approval
Withstand Voltage: I/P-O/P: 4KVAC, I/P-FG: 1.8KVAC, O/P-FG: 1.5KVAC
Isolation Resistance: I/P-O/P: 100M Ohms / 500VDC
EMI Conduction & Radiation: Certified EN 55011
Harmonic Current: Certified EN 61000-3-2; EN 61000-3-3
EMS Immunity: Certified EN 60601-1-2; IEC 61000-4-2, 3, 4, 5, 6, 8, 11

Cooling: Free Air convection for 150W, with 23.5 CFM Fan for 250W
Dimension (WxHxH): 50.8x32.1x101.6 mm / 2.00x1.26x4.00 inch
Packing: 0.32 kg

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
Derating CurveUser-added image

Qty (ea.)/CartonTBD
Individual Box/Gift Box Size (mm)130*77*45
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)TBD
Gross Weight (kg)TBD
Label Width (mm)TBD
Label Height (mm)TBD
Input Configuration
Description3 Pin connector Mating Housing: JST VHR-3N or equivalent Mating Contact: JST SVH-21T-P1.1 or equivalentUser-added image
User-added imageAttention Mark / Refer to operating manual for operating and service instructions
User-added image  CE Certification
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart:
User-added imageUL60950-1, cULus to UL 60950-1 E170507
User-added imageUR 60601-1, 3rd Edition, CAN/CSA-C22.2 No. 601.1-1
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
GOST-R mark for Russia(Document: 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan:
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006
User-added imageUkraine UKRSepro (Document:
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU ( Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
255242246.25DC Output Connector JST B6P-VH or equivalent

Request Info

Text us your inquiry