English (US)
Deutsch
English (Canada)
English (UK)
Español
Finnish
Français
Italiano
Norsk
Polish (język polski)
Português
Russian (русский)
Svenska
Türkçe
ελληνικά (Greek)
中文 (Chinese)
日本語 (Japanese)
한국의 (Korean)GTM21089-W2A Wall Plug-in Medical Power Supply Datasheet
| GTM21089-W2A | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | GTM21089-W2A, Medical Power Supply, Wall Plug-in, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Australian AS 3112 configuration: SAA 2 pins Class II, Output Rating: 18 Watts, Power rating with convection cooling (W) , 3-24V in 0.1V increments, Approvals: WEEE; Ukraine; GOST-R; Double Insulation; VCCI; China RoHS; GTM21089-W2A, Medical Power Supply, Wall Plug-in, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Australian AS 3112 configuration: SAA 2 pins Class II, Output Rating: 18 Watts, Power rating with convection cooling (W) , 3-24V in 0.1V increments, Approvals: WEEE; Ukraine; GOST-R; Double Insulation; VCCI; China RoHS; | ||||||||||||||||||||||
| Information | |||||||||||||||||||||||
| Model Number | GTM21089-W2A | ||||||||||||||||||||||
| Agency Documents | http://www.globtek.info/certs/GTM21089/ | ||||||||||||||||||||||
| CE EC-Declaration for Medical | Contact GlobTek for more information | ||||||||||||||||||||||
| CE EC-Declaration for Industrial/Commercial/ITE | https://globtek.secure.force.com/models/ec_declaration?id=a0Oa000000LNMirEAH | ||||||||||||||||||||||
| CE EC-Declaration for Household | Contact GlobTek for more information | ||||||||||||||||||||||
| UKCA-Declaration for Medical | Contact GlobTek for more information | ||||||||||||||||||||||
| UKCA-Declaration for Industrial/Commercial/ITE | https://globtek.secure.force.com/models/ukca_declaration?id=a0Oa000000LNMirEAH | ||||||||||||||||||||||
| UKCA-Declaration for Household | Contact GlobTek for more information | ||||||||||||||||||||||
| Morocco SDoC Declaration | https://globtek.secure.force.com/models/Morocco_SDoC_Declaration?id=a0Oa000000LNMirEAH | ||||||||||||||||||||||
| RoHS/RoHS3 Declaration | https://www.globtek.com/pdf/rohs_cert/a0Oa000000LNMirEAH | ||||||||||||||||||||||
| Prop 65 Statement | https://en.globtek.com/prop-65-statement.pdf | ||||||||||||||||||||||
| REACH Declaration | https://www.globtek.com/pdf/iso_certificates/REACH.pdf | ||||||||||||||||||||||
| Conflict Minerals Declaration | https://www.globtek.com/pdf/conflict-minerals.pdf | ||||||||||||||||||||||
| Model Parameters | |||||||||||||||||||||||
| Type | Wall Plug-in | ||||||||||||||||||||||
| Technology | Regulated Switchmode AC-DC Power Supply AC Adaptor | ||||||||||||||||||||||
| Category | Medical Power Supply | ||||||||||||||||||||||
| Input Voltage Range (V) | 100-240V~, 50-60 Hz | ||||||||||||||||||||||
| Max Input Current (A) | 0.5A MAX | ||||||||||||||||||||||
| Max Output Power Rating (W) | 18 | ||||||||||||||||||||||
| Output Voltage Range (V) | 3-24 | ||||||||||||||||||||||
| Efficiency | Meets/Exceeds for Medical | ||||||||||||||||||||||
| Ingress Protection | |||||||||||||||||||||||
| Size (mm) | |||||||||||||||||||||||
| Enclosure | |||||||||||||||||||||||
| Rating Table | |||||||||||||||||||||||
* (Final ordering #/Part No to be defined) | |||||||||||||||||||||||
| Specifications | |||||||||||||||||||||||
| A) ELECTRICAL SPECIFICATIONS: 01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac 02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz 03. Output Regulation: +/- 5% measured at the output connector, no minimum load required 04. Line Voltage Regulation: +/- 1% typical measured at full load 05. Output Ripple (Vp-p): 1% or 100 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with a low impedance 47 uf electrolytic capacitor connected at the end of the output connector 06. Turn-ON/OFF: 5% maximum,1 mS typical recovery time for 25% step load 07. Turn-ON Delay: 1 Sec, typical 08. Hold-Up Time: 10 mS typical @ nominal input voltage and full load 09. Inrush Current: 30A maximum cold start @ 240Vac input 10. Switching Frequency: 100 KHz typical, varies with line and load 11. Efficiency: 75% typical at nominal input and full load B) PROTECTION 01. Over-Voltage: Limited via crowbar method 02. Short Circuit: Momentary short circuit protected with auto recovery upon removal of short 03. Leakage Current: N/A for Class II units, there is no PE Ground pin, so Earth Leakage current is not measured 04. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition) 05. Over-load: Hiccup with auto recovery 06. Input Protection: Input line and neutral fusing C) SAFETY 01. Dielectric Withstand Voltage: 5656vdc from primary to secondary 02. Type of protection against electric shock: class II 03. Degree of protection against electric shock: not classified (no applied part) 04. Degree of protection Against ingress of water: IPXO (ordinary) 05. Degree of safety of application in the presence of flammable anesthetic: not evaluated Mode of operation: continuous 06. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition) D) OTHER: 01. MTBF: 200,000 Hours @ 25°C ambient temperature 02. Operating Temperature: 0°C to 40°C ambient temperature 03. Storage Temperature: -10°C to 80°C 04. Humidity: 0% to 90% relative humidity 05. ROHS: COMPLIES WITH EU 2011/65/EU AND CHINA SJ/T 11363-2006 E) ENCLOSURE 1. Upper Housing: High impact plastic, 94V0 polycarbonate, non-vented 2. Lower Housing: High impact plastic, 94V0 polycarbonate, non-vented 3. Size: 77*49*41 ± 0.5 mm | |||||||||||||||||||||||
| Derating Curve | |||||||||||||||||||||||
| Qty (ea.)/Carton | 56 | ||||||||||||||||||||||
| Individual Box/Gift Box Size (mm) | 90*54*110 | ||||||||||||||||||||||
| Individual Box/Gift Box Color | White | ||||||||||||||||||||||
| Master Carton Size (mm) | 455 x 405 x 220 | ||||||||||||||||||||||
| Gross Weight (kg) | 13.3 | ||||||||||||||||||||||
| Label Width (mm) | 35.5 | ||||||||||||||||||||||
| Label Height (mm) | 35.5 | ||||||||||||||||||||||
| Input Configuration | |||||||||||||||||||||||
| Description | Australian AS 3112 configuration: SAA 2 pins Class II Used in Australia, New Zealand, Fiji, Papua New Guinea and Tokelau, has two flat pins forming an inverted V-shape. These flat blades measure 6.3 by 1.5 mm with the Active and Neutral pins of 17 mm in length set 30° to the vertical on a nominal pitch of 13.7 mm. A standard power outlet in Australia provides a nominal voltage of 230 volts at a maximum of 10 amps and always includes an earth connection. As in the UK, its outlets are individually switched for extra safety. Argentina uses a similar plug, with pins 1 mm longer.
| ||||||||||||||||||||||
| Output Configuration | |||||||||||||||||||||||
| Common output connector options: Click to add to your request.
For a comprehensive list of options, click here Contact GlobTek for your specific requirements or custom solutions. | |||||||||||||||||||||||
| Approvals | |||||||||||||||||||||||
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice. Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation. | |||||||||||||||||||||||
| |||||||||||||||||||||||
| Popular Products (Stock items) | |||||||||||||||||||||||
| |||||||||||||||||||||||
What is a Plug-in AC-DC Adapter?
Plug in AC-DC adapters are also known as AC Adaptors or AC-DC converters and are a type of external power supply. Some electrical appliances require power but lack the internal components to derive the required voltage and power from mains power. This is where an AC adapter is used to convert the AC current into DC voltage
How Does an AC-DC Wall Adapter Work?
The AC to DC adapter or external power supply consists of a power supply which is enclosed in a housing similar to an AC plug, hence the term plug type, wall plug in, plug-in or plugtop power adapter. The power supply is plugged into the mains socket and the AC Voltage is then converted by the AC to DC adapter power supply into a DC voltage that is fed into the appliance via the output cable connection.
