| GlobTek

Request Information Download PDF Configure Output Connector

Information

Model Number

GTM21089-WWVV-W2

Description

GTM21089-WWVV-W2, Medical Power Supply, Wall Plug-in, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, NEMA 1-15P, North America Blades, Class II 2 Conductors, Output Rating: 19 Watts, Power rating with convection cooling (W) , 3.3-48V in 0.1V increments, Approvals: VCCI; CE; cUR; China RoHS; WEEE; Double Insulation; RoHS;

Agency Documents

http://www.globtek.info/certs/GTM21089/

CE EC-Declaration for Medical

https://globtek.secure.force.com/models/ec_declaration?id=a0O30000007P7Z6EAK

CE EC-Declaration for Industrial/Commercial/ITE

Contact GlobTek for more information

CE EC-Declaration for Household

Contact GlobTek for more information

RoHS/RoHS3 Declaration

https://www.globtek.com/pdf/rohs_cert/a0O30000007P7Z6EAK

REACH Declaration

https://www.globtek.com/pdf/iso_certificates/REACH.pdf

Conflict Minerals Declaration

https://www.globtek.com/pdf/conflict-minerals.pdf

Model Parameters

Type

Wall Plug-in

Technology

Regulated Switchmode AC-DC Power Supply AC Adaptor

Category

Medical Power Supply

Input Voltage Range (V)

100-240V~, 50-60 Hz

Max Input Current (A)

0.5A MAX

Max Output Power Rating (W)

Output Voltage Range (V)

3.3-48

Efficiency

Meets/Exceeds for Medical

Ingress Protection

IP40

Size (mm)

74*49*40.5 + 0.5

Enclosure

Rating Table

Model Number (Final ordering #/Part No to be defined)	Voltage	Amps (A)	Watts (W)
GTM21089-0903-W2*	3.3	2.6	8.58
GTM21089-1305-1.0-T3*	4	2.6	10.4
GTM21089-1305-W2*	5	2.6	13
GTM21089-1506-W2*	6	2.5	15
GTM21089-1509-W2*	9	1.7	15.3
GTM21089-1512-W2*	12	1.25	15
GTM21089-1815-W2*	15	1.2	18
GTM21089-1818-W2*	18	1	18
GTM21089-1824-W2*	24	0.75	18
GTM21089-1848-15-W2*	33	0.54	17.82
GTM21089-1836-W2*	36	0.5	18
GTM21089-1948-W2*	48	0.39	18.72

* (Final ordering #/Part No to be defined)

Specifications

A) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: 90-264 Vac
02. INPUT CURRENT: <0.5Arms AT 90Vac INPUT
03. Input Frequency: 47 - 63 Hz
04. Output Regulation: +/- 5% measured at the output connector, no minimum load required
05. Line Voltage Regulation: +/- 1% typical measured at full load
06.Output Ripple (Vp-p): 1% or 100 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with a low impedance 47 uf electrolytic capacitor connected at the end of the output connector
07. Turn-ON/OFF: 5% maximum,1 mS typical recovery time for 25% step load
08. Turn-ON Delay: 1 Sec, typical
09. Hold-Up Time: 10 mS typical @ nominal input voltage and full load
10. Inrush Current: 30A maximum cold start @ 240Vac input
11. Switching Frequency: 100 KHz typical, varies with line and load
12. Efficiency: 75% typical at nominal input and full load

B) PROTECTION
01. Over-Voltage: Limited via crowbar method
02. Short Circuit: Momentary short circuit protected with auto recovery upon removal of short
03. Over-load: Hiccup with auto recovery
04. Input Protection: Input line and neutral fusing

C) SAFETY
01. Dielectric Withstand Voltage: 5656vdc from primary to secondary
02. Type of protection against electric shock: class II
03. Degree of protection against electric shock: not classified (no applied part)
04. Degree of protection Against ingress of water: IPXO (ordinary)
05. Degree of safety of application in the presence of flammable anesthetic: not evaluated Mode of operation: continuous
06. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition)

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Storage Temperature: -10°C to 80°C
04. Humidity: 0% to 90% relative humidity

E) ENCLOSURE
1. Upper Housing: High impact plastic, 94V0 polycarbonate, non-vented
2. Lower Housing: High impact plastic, 94V0 polycarbonate, non-vented
3. Size: 74*49*40.5 + 0.5 mm +/-1.0

Derating Curve

Qty (ea.)/Carton

Individual Box/Gift Box Size (mm)

90*54*110

Individual Box/Gift Box Color

White

Master Carton Size (mm)

455 x 405 x 220

Gross Weight (kg)

13.3

Label Width (mm)

35.5

Label Height (mm)

35.5

Input Configuration

Description

NEMA 1-15P, North America Blades, Class II 2 ConductorsAll NEMA 1 devices are two-wire non-grounding devices (hot-neutral) rated for 125 V maximum. NEMA 1-15P plugs have two parallel flat blades, 0.25 inches (6.35 mm) wide, 0.06 inches (1.524 mm) thick, 0.625-0.718 inches (15.875–18.256 mm) long, and spaced 0.5 inches (12.7 mm) apart.

Output Configuration

Common output connector options:
Click to add to your request.


L Type (Coaxial 5.5x2.5mm plug)	C Type (Coaxial 5.5x2.1mm plug)	K Type (Coaxial 3.5x1.3mm plug)	LL Type (5.5x2.5mm Locking 760k type)	CL Type (5.5x2.1mm Locking S761k type)	Magnetic Connector

YL3 Type (KPPX-3P)	YL4 Type (KPPX-4P)	EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)	MSB Type (Micro USB)	Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals

Logo	Description
	Attention Mark / Refer to operating manual for operating and service instructions
	CE Mark: tested to comply with EN61000-3-2, EN61000-3-3 and EN50082-1, including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61001-1-2-2007 EMI: Complies with EN55011 CLASS B and FCC Part 15 B
	CHINA SJ/T 11363-2006, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
	UR 60601-1,File #E172861 or Optional E341350, 1st Edition, 2006-04-26 CAN/CSA-C22.2 No. 601.1-M90, 2005

	Indoor Use Only - Mark is on the label or Molded in the case
RoHS	Specifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
	Japan: Voluntary Control Council for Interference (VCCI)
	WEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case