0 to 100v programmable voltage output Medical (60601-1) Internal Open Frame Power Supply designed to meet ANSI/AAMI ES60601-1 and EN/IEC 60601-1, 3rd edition is rated up to 50W output with dual outputs, Model Series GTM93038-50VV-X.X-FW

0 to 100v programmable voltage output Medical (60601-1)  Internal Open Frame Power Supply designed to meet ANSI/AAMI ES60601-1 and EN/IEC 60601-1, 3rd edition is rated up to 50W output with dual outputs, Model Series GTM93038-50VV-X.X-FW

Continuing to pursue its commitment to quality products and service, GlobTek, a world-class provider of power supplies and power electronic solutions announces it’s 50W dual output channel open frame internal power supply for Ultrasound equipment applications. The Dual output Switcher features a programmable VARIABLE 10VDC@2.6A TO 100VDC@0.26A output as well as 12V 2A regulated output typically used for housekeeping or PWM. For applications employing 2 units in parallel, one or both may be wired for Negative voltage such as -10v to -100V. The output voltage control method is 0VDC TO 10VDC, control input impedance at least 10K OHM.

The model is designed to latest North American national standard ANSI/AAMI ES60601-1 (3rd Edition). Specifically ANSI/AAMI ES60601-1 Issued: 2006/03/09: 2005 Version (R2012) with AMD C1: 2009, AMD C2: 2010 & CAN/CSA-C22.2 No.60601-1 Issued: 2008/02/01; with COR 2:2011/06/01). The model is also designed to meet CB and Semko to IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007) and group and national differences for the CENELEC countries. The unit is CE Mark Certified to EN 60601-1-2:2007, EN 55022:2010, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-3:2008, and EN 55024:2010.. The unit is 2MOPP. 2MOPP (means of patient protection) refers to two independent systems of insulation protecting the patient from dangerous voltages. A single insulating component can get this rating based on extensive testing. 2MOPP certifications exceeds the requirements of 2MOOP and this unit may be used for either application.

Medical grade (60601-1 certified) power supply has an input from 90-264VAC 50-60Hz. The miniature medical grade (60601-1) universal input internal open frame switching power supply model GTM93038-50VV-X.X-FW is available in Class I via a Molex 26-60-4030 Connector utilizing 3 circuits. The unit may be configured with wiring harnesses and customer specified connectors to eliminate extra assemblies and labor cost during final system assembly. Output is provided via Molex 26-60-4060.

This Family features Regulated output with very low ripple, Built-in over current, Short circuit, Over current, and thermal protection as well as low leakage, low ripple, and high efficiency. The product is suitable for most applications requiring DC power and common applications include medical devices, portable medical treatment and monitoring equipment and instruments, Hospital equipment and fixtures, equipment, and as a power source for Li-Ion battery chargers.

Customized enclosure colors, housing designs, output cord types and lengths, as well as customized packaging available upon request.

Customization or complete custom bespoke design is available to customer specifications. GlobTek has more than two decades of experience and a high level of expertise in Ultrasound and Medical use power supplies employing at least one variable output voltage controlled by the system.

The power supply can be supplied with customer designated input and output plugs, many of which are stocked at GlobTek New Jersey USA and Suzhou China locations.

The power supplies comply with IEC 60950-1 2nd edition or IEC60601-1 3rd edition and have certifications by UL (North America), C-Tick (Australia/New Zealand), Iram (Argentina), BSMI (Taiwan), CB (Worldwide), CCC (China), Demko (Europe), eK (Korea), NRCAN (Canada), Spring (Singapore), SIQ (Europe), Gost (Russia), Singapore (PSB), and UkrSEPRO (Ukraine). They also comply with Canadian Nrcan efficiency requirements as well as FCC/VCC/CE emc requirements.

Made in USA or China option available. Local China to China delivery available upon request.

5 year warranty

Power Supplies Open Frame Power Supplies News Medical Power Supplies

Request Info

  • ABSTRACT:
When a large inductive load such as a DC motor or a solenoid controlled valve is placed on the output of the power supply, at certain points of the load operation current/energy may be returned... PSU Back EMF Option, for GlobTek EL6 design series products
  • GlobTek now offers a 5A rated MicroUSB (USB Micro-B) connector along with Power supplies utilizing this connector with output currents up to 5A. Popular custom voltages are available from 4-5.95V but any... GlobTek offers MicroUSB (USB Micro-B) connectors with up to 5A current ratings for high current applications, 451-02180281(R)
  • ESD Testing Method,
	for Class II Input Medical Devices
	GlobTek, May 6,
	2019, Dave Love
	
	

Abstract:
With the latest 4th edition of the medical EMC standard 60601-1-2, 4th Ed, the ESD test levels... ESD Testing Method, for Class II Input Medical Devices
  • GlobTek offers a wide variety of IEC60335-1 household use certified power supplies

The International Standard 60335-1 covers the safety of electrical appliances for household and similar purposes with... 60335-1 Household Certified power supplies available in a number of formats and wattage as standard items
  • AS/NZ 60950 Certification is required for Switching power supplies to be imported independently or with a system into Australia or New Zealand per the Australian State Acts & Regulations (eg NSW Electricity... GlobTek ITE, Medical, and household use power supplies are certified to AS/NZ 60950 and are ideal for use with equipment to be exported to Australia
  • GlobTek offers a wide range of power supplies fitted with USB type connectors. Due to special application needs, higher voltages may be required to accommodate voltage drop or high current carrying capability. Standard USB power supplies with output voltages above 5V available in 5.1V, 5.2V, 5.3V, 5.4V, and 5.5V for Medical, ITE, and household use.
  • GlobTek offers customer specific termination options for it's wide range of Medical, ITE, and household use power supplies as well as cable assemblies and wire harnesses. As part of it's offering, GlobTek... XLR connectors available in Male or Female configuration both in mechanically attached and overmolded configurations on GlobTek Medical, Household use, and ITE power supplies
  • Globtek can provide up to seven QC3.0 output power profiles for our GTM96605 USB adaptive power
products. Six of the USB3.0 power profiles are normally provided as follows:
5V/4.6A, 5.8V/4.6A, 9V/4.4A,... USB Type C Adaptive Power supply adapter/rapid charger supports USB PD 2.0/3.0, QC 2.0/3.0, QC 4.0/4.0+ and offers Special/custom Output Voltages, Model family GTM96605
  • GlobTek's GTM961800P 180W Desktop provides up to 300W surge handling capacity for up to a minute for applications with a 120V input option and up to 500W for 230V only applications. This is ideal for motor... 180W Desktop power supplies provide up to 300W peak power @ 120V input and up to 500W at 230V, Medical, ITE, and Household use certified
  • GlobTek is introducing 3 new waterproof locking barrel connectors that will be molded equivalents to the Switchcraft® part numbers listed below:

GlobTek code CLW:
Female Barrel 5.5 * 2.1 barrel w/thumbscrew;... GlobTek is introducing 3 new waterproof locking barrel connectors
  • GlobTek offers the following plugs to meet the requirements in South Africa:

PN: Q-SANS64-1-16A(R) Color: Black, SABS164-1 3 round prongs
PN: Q-SANS164-4L-16A(R) – Color: Blue, SABS164-4, +53º
PN:... GlobTek offers South African SABS164-1 and SABS164-4 Plugs in 3 versions 0º (red), +53º (blue) and -53º (black) for the Q-style wall plug in power supplies for Medical, ITE, and household use.
  • Globtek can provide up to seven USB PD2.0/3.0 output power profiles for our GTM96605 USB adaptive
power products. Six of the USB PD2.0/3.0 power profiles are normally provided as follows:
5V/4.6A, 5.8V/4.6A,... USB Adaptive Power Supply offers Special Output Voltages option at 60W power level and complies with USB PD2.0/3.0 protocol as well as QC2.0/3.0
  • Call
    Email
    💬
    Text
    💁
    Chat
    ?
    Request a Quote
    Can we help you?
    Can we help you?