DOE EPS 2.0 Level Vi compliant Power Over Ethernet (POE) Injectors

DOE EPS 2.0 Level Vi compliant Power Over Ethernet (POE) Injectors DOE EPS 2.0 Level Vi compliant Power Over Ethernet (POE) Injectors DOE EPS 2.0 Level Vi compliant Power Over Ethernet (POE) Injectors

According to the DOE, Power over Ethernet injectors must comply with Level Vi efficiency requirements. Information related to this requirement may be found online: https://energy.gov/sites/prod/files/2014/10/f18/externalpowersupplies_tp_nopr.pdf

GlobTek provides patented technology which enables Level Vi efficiency compliance. GlobTek offers high efficiency 15.4w IEEE802.3af PoE PSE (Power Sourcing Equipment), 25w and 70w IEEE802.3at PoE+ PSE (Power Sourcing Equipment).

The IEEE developed IEEE802.3af to standardize a system of supplying low voltage power to networked devices via the communications line. Released in mid-2003, the standard was entitled: Data Terminal Equipment (DTE) Power via Media Dependant Interface (MDI). It is more commonly referred to as Power over Ethernet (POE). PoE supplies power to network devices over the same standard Category 5e (CAT-5) cabling that carries the data. Devices can be installed wherever structured Ethernet wiring is located, without the need for AC power outlets nearby. The benefits of PoE include increased mobility for end devices, added safety (no AC power involved), simplicity of installation, reliability, security and cost savings.

GlobTek provides both Power Sourcing Equipment (PSE) and Powered Devices (PD). Power Sourcing Equipment (PSE) provide the DC power to Powered Devices (PD). PSEs source up to 70W watts at 56V Max volts to each Powered Devices (PD). A PSE, considered a midspan device, is connected in-line to each end device and adds power to the line. GlobTek provides Powered Devices (PD) in the form of POE Splitters designed to convert low voltage power transmitted over structured Ethernet CAT-5 cabling into 5-24VDC for end products and also provide Data as transmitted on the cabling.

GlobTek's line of Power Sourcing Equipment (PSE) Midspans and Injectors shown below are DOE EPS 2.0 Level VI compliant for energy efficiency as described here: http://en.globtek.com/level-vi-power-supplies/. GlobTek's Patent pending technology allows for the Greenest implementation of Power over Ethernet available on the market today. Typical applications for such devices are IP Cameras, Ip Phones, Network appliances, and Security equipment.

A product selector is available online: https://en.globtek.com/power-over-ethernet/

Power Over Ethernet (POE) News

Request Info

  • ABSTRACT:
When a large inductive load such as a DC motor or a solenoid controlled valve is placed on the output of the power supply, at certain points of the load operation current/energy may be returned... PSU Back EMF Option, for GlobTek EL6 design series products
  • GlobTek now offers a 5A rated MicroUSB (USB Micro-B) connector along with Power supplies utilizing this connector with output currents up to 5A. Popular custom voltages are available from 4-5.95V but any... GlobTek offers MicroUSB (USB Micro-B) connectors with up to 5A current ratings for high current applications, 451-02180281(R)
  • ESD Testing Method,
	for Class II Input Medical Devices
	GlobTek, May 6,
	2019, Dave Love
	
	

Abstract:
With the latest 4th edition of the medical EMC standard 60601-1-2, 4th Ed, the ESD test levels... ESD Testing Method, for Class II Input Medical Devices
  • GlobTek offers a wide variety of IEC60335-1 household use certified power supplies

The International Standard 60335-1 covers the safety of electrical appliances for household and similar purposes with... 60335-1 Household Certified power supplies available in a number of formats and wattage as standard items
  • AS/NZ 60950 Certification is required for Switching power supplies to be imported independently or with a system into Australia or New Zealand per the Australian State Acts & Regulations (eg NSW Electricity... GlobTek ITE, Medical, and household use power supplies are certified to AS/NZ 60950 and are ideal for use with equipment to be exported to Australia
  • GlobTek offers a wide range of power supplies fitted with USB type connectors. Due to special application needs, higher voltages may be required to accommodate voltage drop or high current carrying capability. Standard USB power supplies with output voltages above 5V available in 5.1V, 5.2V, 5.3V, 5.4V, and 5.5V for Medical, ITE, and household use.
  • GlobTek offers customer specific termination options for it's wide range of Medical, ITE, and household use power supplies as well as cable assemblies and wire harnesses. As part of it's offering, GlobTek... XLR connectors available in Male or Female configuration both in mechanically attached and overmolded configurations on GlobTek Medical, Household use, and ITE power supplies
  • Globtek can provide up to seven QC3.0 output power profiles for our GTM96605 USB adaptive power
products. Six of the USB3.0 power profiles are normally provided as follows:
5V/4.6A, 5.8V/4.6A, 9V/4.4A,... USB Type C Adaptive Power supply adapter/rapid charger supports USB PD 2.0/3.0, QC 2.0/3.0, QC 4.0/4.0+ and offers Special/custom Output Voltages, Model family GTM96605
  • GlobTek's GTM961800P 180W Desktop provides up to 300W surge handling capacity for up to a minute for applications with a 120V input option and up to 500W for 230V only applications. This is ideal for motor... 180W Desktop power supplies provide up to 300W peak power @ 120V input and up to 500W at 230V, Medical, ITE, and Household use certified
  • GlobTek is introducing 3 new waterproof locking barrel connectors that will be molded equivalents to the Switchcraft® part numbers listed below:

GlobTek code CLW:
Female Barrel 5.5 * 2.1 barrel w/thumbscrew;... GlobTek is introducing 3 new waterproof locking barrel connectors
  • GlobTek offers the following plugs to meet the requirements in South Africa:

PN: Q-SANS64-1-16A(R) Color: Black, SABS164-1 3 round prongs
PN: Q-SANS164-4L-16A(R) – Color: Blue, SABS164-4, +53º
PN:... GlobTek offers South African SABS164-1 and SABS164-4 Plugs in 3 versions 0º (red), +53º (blue) and -53º (black) for the Q-style wall plug in power supplies for Medical, ITE, and household use.
  • Globtek can provide up to seven USB PD2.0/3.0 output power profiles for our GTM96605 USB adaptive
power products. Six of the USB PD2.0/3.0 power profiles are normally provided as follows:
5V/4.6A, 5.8V/4.6A,... USB Adaptive Power Supply offers Special Output Voltages option at 60W power level and complies with USB PD2.0/3.0 protocol as well as QC2.0/3.0
  • Call
    Email
    💬
    Text
    💁
    Chat
    ?
    Request a Quote
    Can we help you?
    Can we help you?