De GlobTek Modelo GTM41061-18VV-Q ITE / Fuente Medica de estilo para enchufe de pared.
Request more info

GlobTek’s GTM41061-18VV-Q ITE / Medical Wall Plug-in 18 Watt Power Supply Features CCC Approval for Tropical and Altitude <2000M Safety!

GlobTek’s GTM41061-18VV-Q ITE / Medical Wall Plug-in 18 Watt Power Supply Features CCC Approval for Tropical and Altitude <2000M Safety! GTM-41061 Family represents GlobTek’s 18 Watt wall plug-in series of AC/DC adapters with interchangeable blades. These converters are ideally suited to provide reliable power globally, as it features both, Universal 90-240V input at 50-60 Hz, factory-configurable outputs ranging from 5Vo to 30Vo, with 0.1Vo increments, changeable input blade system with individual field replaceable input plugs, including: North America / Japan NEMA 1-15P, Australian, UK BS 1363, European CEE 7/16 configuration, Korean KS C8305, Argentina IRAM 2073, China GB, India IS 1923 6A/SANS 164-3/BS546, IEC320/C18 Inlet, Brazilian NBR6147, S. African SANS 164-1 and British Standard BS 546-15A configurations and Global Regulatory & Safety Approvals and Certifications.

This series features Regulated outputs with very low ripple, built-in over current, short circuit, over-voltage, and thermal protection as well as low leakage, low ripple, and high efficiency.

GlobTek’s GTM41061 series of enclosed power supplies are housed in Impact resistant non-vented Polycarbonate Thermal Conduction-Cooled Cases.

Certifications / Approvals / Safety Compliance:

IT and Medical versions this family feature Intertek ETL certificates and reports for Medical (60601-1) power supply ac adapters to latest North American national standard ANSI/AAMI ES60601-1 (3rd Edition) and proposed Surge Protection compliance for European Market (4th Edition).

ANSI/AAMI ES60601-1 Issued: 2006/03/09: 2005 Version (R2012) with AMD C1: 2009, AMD C2: 2010 & CAN/CSA-C22.2 No.60601-1 Issued: 2008/02/01; with COR 2:2011/06/01).

These models are also CB and SEMCO certified to IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007) and group and national differences for the CENELEC countries.

The units are CE Mark Certified to EN 60601-1-2:2007, EN 55022:2010, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-3:2008, and EN 55024:2010.

Intertek ETL Certification is accepted by the OSHA Nationally Recognized Testing Laboratory (NRTL) Program which is required for demonstrating compliance to UL standards for switching power supplies. The units are certified 2MOPP (means of patient protection), which refers to two independent systems of insulation protecting the patient from dangerous voltages. A single insulating component can get this rating based on extensive testing. 2MOPP certifications exceeds the requirements of 2MOOP and these power supplies may be used for either application. In addition the series complies with 60601-1-11 Home health care standards.

Aside from 2xMOPP rating, the model is designed to withstand ESD surge ratings of 8kV Contact / 15kV Air.

GTM41061 also complies with North American Energy Star, Canadian NRCAN, EISA, EuP, and other worldwide requirements for Level V efficiency compliance and is produced in an ISO13485 certified facility. IEC 60950-1 2nd edition or IEC60601-1 3rd edition and have certifications by UL (North America), C-Tick (Australia/New Zealand), IRAM (Argentina), BSMI (Taiwan), CB (Worldwide), CCC (China), Demko (Europe), eK (Korea), NRCAN (Canada), Spring (Singapore), SIQ (Europe), GOST (Russia), Singapore (PSB), and UkrSEPRO (Ukraine). They also comply with Canadian NRCAN efficiency requirements as well as FCC/VCC/CE EMC requirements.

Options:

Bespoke, customized enclosure colors, housing designs, output cord types and lengths, as well as customized packaging, Open Frame or ruggedized to various degrees of Ingress Protection, such as IP51 versions are available. According to BS EN 60529 and IEC 529, IP51 signifies that the medical (60601-1) power supply is Protected against dust - limited ingress (no harmful deposit) as well as Protected against direct vertical sprays of water. Test reports and certifications as well, as variety of other customizations or options is available upon request.

The power supply can be supplied with customer designated output plugs, many of which are stocked at GlobTek New Jersey USA, Münster Germany, and Suzhou China locations.

The power supply can be provided with customer designated output plugs, many of which are stocked at GlobTek New Jersey USA, Münster, Germany, and Suzhou, China locations.

Made in USA or Made in China options available. Local China to China delivery is available upon request.

Industry – Leading 5 year warranty

Applications:

This family of Industry’s high density wall plug-in AC-DC converters is suitable for most applications requiring DC power which include industrial, marine consumer or medical devices, portable medical treatment and monitoring equipment & instruments, hospital equipment and fixtures, Lighting and Support Equipment, medium and high power appliances or consumer products, VOIP phones and telecom equipment and are a perfect power source for rapid Li-Ion battery charging.

Company:

GlobTek is a power systems solutions provider with design and manufacturing facilities in the USA and China and sales offices in Germany, France, and the UK. Offering a line of power supplies, energy systems, PoEs, LED drivers, power cords, battery packs and many other power-related products and services for applications from gym equipment to medical systems, GlobTek can also develop and create custom power solutions for just about any application.

GlobTek is located at 186 Veterans Drive, Northvale NJ 07647. For more information call 201-784-1000 or visit GlobTek online at www.globtek.com


id:320 nr:469

Request Info

Product Updates
GlobTek offers over-molded versions of Molex Mini Fit Crimp Rectangular Housing, 2 Circuit, Black V-0, PN 39-03-9022 for various types of cables and applications, PN MFJ/C1176

In response to a customer requirement for a clean and professional look and a highly reliable lifespan, GlobTek created a mold tooling for an overmold for Molex housing 39-03-9022 . The Overmold/boot may be molded on PVC or Silicone material cable jackets.

Can we help you?
Can we help you?