Medical Grade DC/DC Converter serves as 300W Isolation transformer for IEC60601 CF rated devices, FE30D4HG3-F
Open Frame Medical 300W DC/DC Switching Power Supply Offers superior Isolation and high performance with a 12-32VDC input and 12VDC Output.
The FE30D4HG3-F Open Frame Power Supply is a compact and energy dense solution for converting 12-32VDC to 12VDC and also serves as an isolation transformer for applications requiring extra isolation between mains and patients.
The miniature 160*83.5*36.6 mm Medical DC input switching power supply model FE30D4HG3-F is available in an open frame configuration with an optional factory installed perforated polycarbonate enclosure for superior isolation.
The high-density power supply has an input from 12-32VDC and provides 300W Single Outputs with output options from 5V to 55VDC. The series has an average efficiency of >90%. It also provides Overload, Short circuit, and Over Voltage.
This unit is compliant with IEC60950-1 for ITE Equipment and 60601-1 for Medical and Healthcare applications. Medical units are certified 2xMOOP (means of operator protection) which refers to two independent systems of insulation protecting the patient from dangerous voltages. A single insulating component can get this rating based on extensive testing.
This family of DC-DC converters is suitable for most applications requiring reliable DC Power such as medical devices, portable medical treatment and monitoring equipment and instruments, hospital equipment and fixtures, high power appliances, Test and Measurement equipment, Industrial controls, consumer products, Telecom equipment, or battery chargers.
Custom wire harnesses and loom kits available either assembled on the unit or packaged with it.
Bespoke, customized enclosure colors, housing designs, output cord types and lengths, as well as customized packaging, ruggedized to various degrees of Ingress Protection, such as IP52 versions are available upon request. According to BS EN 60529 and IEC 529, IP52 signifies that the medical (60601-1) power supply is Protected against dust - limited ingress (no harmful deposit) as well as Protected against direct sprays of water up to 15°C from the vertical. Test reports and certifications as well, as variety of other customizations or options is available upon request.
Made in USA or Made in China options available. Local China to China delivery is available upon request.
Industry – Leading 5 year warranty
Contact GlobTek for a wide range of other Internationally Certified Power Supplies and other Power-related products! 1-201-784-1000 or firstname.lastname@example.org
50W External Class 2 UL 1310 Certified power supply meets requirements to be used in Plenum, Model GT-2S5024D-R
GlobTek’s model GT-2S5024D-R has been specifically designed for us and is Suitable for use in environmental air space in accordance with Section 300.22.C of the National Electrical Code, and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, C22.1.
A plenum is considered to be an area that has not specifically been fabricated for air handling purposes, such as a duct, but does in fact handle or convey environmental air. The most common type of plenum is the area above a suspended grid-type ceiling when designed so that return air is pulled through the above-ceiling space and recirculated into the supply air system.